Better Music Builder O-10 Owner's manual

Better Music Builder
Brand
Better Music Builder
Model
O-10
Category
Soundbar speakers
Type
Owner's manual

This manual is also suitable for

Thank you for purchasing this unit. To
make full and effective use of this unit,
please read this Owner's Manual care-
fully before operating it. Please retain
this manual for future reference.
w w w . B e t t e r M u s i c B u i l d e r . c o m
OWNER'S MANUAL
®
®
Passionate about Music
2-Way Pro Speaker
O-6 6-inch WOOFER
O-10 10-inch WOOFER
Better Music Builder
PRO-LOUDSPEAKER
OVAL SERIES
Your stylist Choice
O-10
O-6
Better Music Builder is a leader in the Audio and
Karaoke equipment industry. We are committed
to offering you high quality audio products.
Unlike any others brand, we deliver the best cost
and value to you directly. We may update our
manual on short notice, so we highly recommend
downloading the latest update information includ-
ing operation manuals, installation instructions,
and other new technologies updates, etc. from
our website www.BetterMusicBuilder.com.
CONTENTS
INTRODUCTION............................................................................................................................................... 3
SYSTEM FEATURES
........................................................................................................................................... 3
SAFETY INSTRUCTIONS
............................................................................................................................. 4~5
PACKAGE ACCESSORIES
................................................................................................................................ 6
SYSTEM APPLICATIONS
.................................................................................................................................. 6
• Methods of Speaker Connection
...................................................................................................................... 6
• Full Range Applications: Standard Format, Premium Format, Superior Format
.................................. 7
• Connecting the Speaker with 3-D Positional Audio (Premium Format)
................................................. 8
• Connecting the Speaker with 5-D Pro Audio (Superior Format)
............................................................. 8
CONTROLS AND FUNCTIONS
...................................................................................................................... 9
• Front & Rear Panel Features for 2-Way Full Range Speaker Model
O-6........................................... 9
• Front & Rear Panel Features for 2-Way Full Range Speaker Model
O-10......................................... 9
SYSTEM SETUP GUIDELINES
........................................................................................................................ 10
• Installation Setup
.................................................................................................................................................... 10
1. Mounting the Speaker to the Ceiling
............................................................................................. 10
2. Mounting the Speaker to the Wall
................................................................................................. 11
3. Placing the Speaker on the Portable Stand
................................................................................. 12
4. How to Open Grill Cover
.................................................................................................................. 12
PHYSICAL DIMENSIONS
.............................................................................................................................. 13
SPECIFICATIONS
............................................................................................................................................ 13
TROUBLESHOOTING
.............................................................................................................................. 14~15
FINAL WORDS TO USER
.............................................................................................................................. 15
WARRANTY
..................................................................................................................................................... 16
AGENCY REGULATORY NOTICES
.............................................................................................................. 17
CONTACT INFORMATION
........................................................................................................................... 18
2
Safety
Applications
Intro
Set Up
Speaker
Features
Package
Troubleshooting
Warranty
Final Words
Notices
Contact Us
Spec
Dimensions
3
INTRODUCTION
Better Music Builder is proud to introduce a high-end Oval
Series speaker line to the consumers in North America. This
Oval Series speaker has two models (one with 6-inch
woofer and the other with 10-inch woofer) in compact size
with fashionable appearance and excellent vocal sound for
singing. They are suitable for commercial use especially for
classy nightclubs and bars.
The Oval Series speaker is also good for home entertainment.
They work perfectly with both 3-channel and 5-channel
amplifiers for both karaoke singing and home theater. Better
Music Builder provides with you with high quality 3 and
5-channel amplifiers DX-222 G2 and DX-288 G2 (Generation
Two) to match this Oval Series speakers.
The Oval Series is 2-way full range speaker system (both
6-inch O-6 Speaker and 10-inchn O-10 Speaker) with wide
dispersion. Its sound is natural and clear while the cabinet is
handy and compact with fashionable appearance. I It can be
applicable in both small and medium sound format.
The Oval Series adopts two 3-inch new paper cone high
frequency speakers which greatly enhance the performance
and power loading capacity in the both mid and high
frequencies. Both O-6 and O-10 speaker optimized the low
frequency driver that can realize highest clearance and
lowest distortion in high sound pressure. The 12 dB attenua-
tion slope cross frequency circuit enables smooth frequency
response. And the full range circuit protecting system provides
higher security.
The cabinet is injection molded with high intensity polypropyl-
ene. The delicate designed shape provides best structure
strength and acoustic characteristics. There are four colors for
the grill of the O-6 and O-10: red, silver, black and brown for
your choice.
Intro
SYSTEM FEATURES
2-WAY FULL RANGE PRO SPEAKER: O-6
• 2x3” tweeters [paper cone mid-high frequency drivers]
• 1x6” woofer [low frequency woofer]
• High intensity injection moulding cabinet
• Dispersion 140° x 160°
• Frequency response 80Hz~16kHz (-3dB)
• Sensitivity 88dB, Max SPL 120 dB
• Round hanging cover: Three 8mm screws size
• The cabinet is made from high intensity PP, the color for
cabinet and grill are various options
(Red / Silver / Black / Brown).
2-WAY FULL RANGE PRO SPEAKER: O-10
• 2x4” tweeters [paper cone mid-high frequency drivers]
• 1x10” woofer [low frequency woofer]
• High intensity injection moulding cabinet
• Dispersion 120° x 120°
• Frequency response 45Hz~20kHz (-3dB)
• Sensitivity 90dB, Max SPL 123 dB
• Round hanging cover: Three 8mm screws size
• The cabinet is made from high intensity PP, the color for
cabinet and grill are various options
(Red / Silver / Black / Brown).
Features
Better Music Builder
O-10
O--6
4
SAFETY INSTRUCTIONS
We will not notify you any errors or changes in this manual in
advance. If there are any errors and changes in this manual,
we will make the corrections in a timely manner. The
corrections and changes will be appeared in our website.
Therefore, please visit our website at BetterMusicBuilder.com
frequently to find out the most updated information, corrections
on errors and changes in this manual. You may also contact
us at toll free at 1-800-318-2218.
CAUTIONS FOR INSTALLATION
POWER SUPPLY / POWER CORD
• Only use the voltage specified as correct for the device.
The required voltage is printed on the name plate of the
device.
• Use only the included power cord.
• Do not place the power cord near heat sources such as
heaters or radiators, and do not excessively bend or
otherwise damage the cord, place heavy objects on it, or
place it in a position where anyone could walk on, trip
over, or roll anything over it.
• Remove the electric plug from the outlet when the device is
not to be used for extended periods of time, or during
electrical storms.
• When removing the electric plug from the device or an
outlet, always hold the plug itself and not the cord. Pulling
by the cord can damage it.
DO NOT OPEN
• Do not open the device or attempt to disassemble the
internal parts or modify them in any way. The device
contains no user-serviceable parts. If it should appear to
be malfunctioning, discontinue use immediately and have
it inspected by qualified Better Music Builder service
personnel.
WATER WARNING
• Do not expose the device to rain, use it near water or in
damp or wet conditions, or place containers on it containing
liquids which might spill into an openings.
• Never insert or remove an electric plug with wet hands.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALIFIED PERSONNEL
Safety
ABNORMALITY
• If the power cord or plug becomes frayed or damaged,
or if there is a sudden loss of sound during use of the
device, or if any unusual smells or smoke should appear to
be caused by it, immediately turn off the power switch,
disconnect the electric plug from the outlet, and have the
device inspected by qualified Better Music Builder service
personnel.
• If this device should be dropped or damaged, immediately
turn off the power switch, disconnect the electric plug from
the outlet, and have the device inspected by qualified
Better Music Builder service personnel.
LOCATION
• Always consult qualified Better Music Builder service
personnel if the device installation requires construction
work, and make sure to observe the following precautions.
• Choose mounting hardware and an installation location
that can support the weight of the device.
• Avoid locations that are exposed to constant vibration.
• Inspect the device periodically.
• When transporting or moving the device, always use two
or more person. Attempting to lift the device by yourself
may damage your back, result in other injury, or cause
damage to the device itself.
• Before moving the device, remove all connected cables.
• Do not use the device in a confined, poorly-ventilated
location. If this device is to be used in a small space
other than an EIA-standard rack, make sure that there is
adequate space between the device and surrounding
walls or other devices; at least 30cm at the sides, 30cm
behind and 30cm above. Inadequate ventilation can
result in overheating, possibly causing damage to the
device(s), or even fire.
NO GOOD
5
• Do not use the speaker’s handles for suspended installation.
Doing so can result in damage or injury.
• Do no expose the device to excessive dust or vibrations,
or extreme cold or heat (such as in direct sunlight, near a
heater, or in a car during the day) to prevent the possibility
of panel disfiguration or damage to the internal
components.
• Do not place the device in an unstable position where it
might accidentally fall over.
CONNECTIONS
• Before connecting the device to other devices, turn of the
power for all devices. Before turning the power on or off
for all devices, set all volume levels to minimum.
CAUTION
• When turning on the AC power in your audio system,
always turn on the device LAST, to avoid speaker damage.
When turning the power off, the device should be turned
off FIRST for the same reason.
• Do not insert your fingers or hands in any gaps or
openings on the device (ports, etc.).
• Avoid inserting or dropping foreign objects (paper, plastic,
metal, etc.) into any gaps or openings on the device
(ports, etc.). If this happens, turn off the power immediately
and unplug the power cord from the AC outlet. Then
have the device inspected by qualified Better Music
Builder service personnel.
• Do not use the device for a long period of time at a high
or uncomfortable volume level, since this can cause
permanent hearing loss. If you experience any hearing
loss or ringing in the ears, consult a physician.
• Do not operate the device if the sound is distorting.
Prolonged use in this condition could cause overheating
and result in fire.
• Do not rest your weight on the device or place heavy
objects on it, and avoid use excessive force on the buttons,
switches or connectors.
GETTING STARTED
WIRING
IMPORTANT: Make sure all equipment is turned off before
making any connections.
For speaker connections, use a high-quality speaker wire with
polarity coding. The side of the wire with a ridge or other
coding is usually considered positive polarity
If desired, consult Better Music Builder technical support
for speaker wire and connection options.
NOTE
The speakers have coded terminals that accept a variety or
wire connectors.
To ensure proper polarity, connect each + terminal on the
back of the amplifier or receiver to the respective + (red)
terminal on each speaker. Connect the – (black) terminals in
a similar way. See the owner’s guides that were included
with your amplifier, receiver and television to confirm connec-
tion procedures.
IMPORTANT: Do not reverse polarities (i.e., + to – or – to +)
when making connections. Doing so will cause poor imaging
and diminished bass response.
ADJUSTING
Check the speakers for playback, first by setting the system
volume control to a minimum level, and then by applying
power to your audio system. Play a favorite music or video
segment and increase the system volume control to a comfort-
able level.
You should hear balanced audio reproduction across
the entire frequency spectrum. If not, check all wiring connec-
tions or consult the authorized dealer from whom you
purchased the system for more help.
The amount of bass you hear and the stereo-image quality
will be affected by a number of different factors, including the
room’s size and shape, the construction materials used to
build the room, the listener’s position relative to the speakers,
and the position of the speakers in the room.
Listen to a variety of music selections and note the bass level.
If there is too much bass, move the speakers away from
nearby walls. Conversely, if you place the speakers closer to
the walls, there will be more bass output.
CARING
Each enclosure has a finish that does not require any routine
maintenance. When needed, use a soft cloth to remove any
fingerprints or dust from the enclosure or grille.
NOTE
6
PACKAGE ACCESSORIES
The Package comes with one speaker, one mounting kit and four screws. All other accessories mentioned in the manual for
installation purpose are not included. They are sold separately.
Package
Owner's Manual
Thank you for purchasing this unit. To make
full and effective use of this unit, please read
this Owner's Manual carefully before
operating it. Please retain this manual for
future reference.
w w w . B e t t e r M u s i c B u i l d e r . c o m
OWNER'S MANUAL
®
®
Pas sio nate abo ut M usi c
6mm Screw: 4 pcs
for mounting bracket
Consumer warranty
and registration card
<Mail in U.S.A. only> Consumers from Canada
can get the warranty card by downloading it
from our website www.BetterMusicBuilder.com.
PLACE
STAMP
HERE
CUSTOMER SERVICE
29300 Kohoutek Way #150
Union City, CA 94587
U.S.A.
Mounting Kit: 1 pc
Speaker: 1 pc
Better Music Builder
Better Music Builder is a leader in the Audio and
Karaoke equipment industry. We are committed
to offering you the high quality audio product.
Unlike any others brand, we deliver the best cost
and value to you directly. We may update our
manual on short notice, so we highly recommend
downloading the latest update information
including operation manuals, installation
instruction, and other new technologies updates,
etc. from our website www.BetterMusicBuilder.com.
2-Way Pro Speaker
O-6 6-inch WOOFER
O-10 10-inch WOOFER
Better Music Builder
PRO-LOUDSPEAKER
OVAL SERIES
Your stylist Choice
O-10
O-6
SYSTEM APPLICATIONS
Applications
Speakon Outputs
The upper Speakon jack has both Channel 1 and
Channel 2 outputs, so it is especially useful for parallel,
bi-amp, or BRIDGE mono operation. The other Speakon
carries only Channel 2's output. See the illustrations at
above.
SPEAKON Y CONNECTORS
INPUT OUTPUT
L
O
C
K
L
O
C
K
TO CHANNEL 2
SPEAKER
TO CHANNEL 1
SPEAKER
2–
1–
1+ 2+
REFERENCE CONNECT
8
4
2
+
–
8
4
2
–
+
SPEAKON CONNECTORS
INPUT OUTPUT
L
O
C
K
L
O
C
K
SOURCE
(from active/powered)
BRIDGE
2–
1–
1+ 2+
REFERENCE CONNECT
8
4
2
+
–
Source (INPUT) comes from the output source of the
active/powered speaker while the bridge (OUTPUT)
connects to the passive/non-powered speaker.
A speakon cable is required to connect the “OUTPUT”
of the acive/powered speaker to the “INPUT” of the
passive/non--powered speaker. Please order the speakon
cable from our authorized dealers.
NOTE
7
FULL RANGE APPLICATIONS
Standard Format is a small format for sound
performance. It is recommended using five O-6
speakers for home theater and karaoke singing. O-6
and O-10 speakers can also be used for commercial
especially for small nightclubs and bars.
Premium Format is another format for high sound
performance. Under this format, it is recommended using five
O-6 speakers with a power subwoofer for home theater and
karaoke singing for strong bass. This format by using O-6
and O-10 speakers are good for commercial especially for
nightclubs and bars.
Superior Format is the supreme format
for sound performance. Under this format, it
is recommended using both O-6 and O-10
speakers and also a power subwoofer to
produce high level power output for home
theater and karaoke singing. This superior
format is good for commercial especially
classy and elegant nightclubs and bars.
Please refer to page 8 for detailed diagram.
HD TV
2-WAY FULL RANGE
SPEAKER O-10
2-WAY FULL RANGE
SPEAKER O-10
2-WAY FULL RANGE
SPEAKER O-6
2-WAY FULL RANGE
SPEAKER O-6
CENTER MONITOR
2-WAY FULL RANGE SPEAKER
O-6
+
BASS POWERED SUBWOOFER
DFS-112 SUB
PREMIUM FORMAT
STANDARD FORMAT
SUPERIOR FORMAT
2-WAY FULL RANGE SPEAKER
O-6
2-WAY FULL RANGE SPEAKER
O-10
+ +
BASS POWERED SUBWOOFER
DFS-112 SUB
2-WAY FULL RANGE SPEAKER
O-6
2-WAY FULL RANGE SPEAKER
O-6
0W 1000W
800W
HI
0W 1000W
500W
MID
0W 1000W
300W
LOW
FREQUENCY RANGE
BASS POWERED SUBWOOFER
DFS-112 SUB
0W 1000W
800W
LOW/
BASS
FREQUENCY RANGE
CPU INTE GRATE D MI XING AMPL IFIE R DX- 288 G2
IR
#
INPUT
< PRE V
NEXT >
ENTER
PANEL
SETT INGS
LOADING...
PO WE R
Better Musi c Builder
Passionate about Music
®
1 G AIN BA SS MID TRE BLE
2 3GAIN BA SS MID TREB LE
MICR OPHO NE 1/4
DELAY R EPE AT TIME R EVE RB
ECHO EFFE CT
SUB BAS S MID TRE BLE
MUSI C TO NEMICR OPHO NE 2/3 /5
KEY CONT ROL
G2 SERIES
Gener atio n 2
ECHO VOL UME
MIC MAST ER MUSI C VOL UME
MAIN SEL ECTO R
MIN MIN MIN
MAX MAX
MAX
FEED BACK DES TROY ER
5-D PRO AUDIO DX-288 G2
8
CONNECTING THE SPEAKER WITH 5-D PRO AUDIO (SUPERIOR FORMAT)
Please refer to the diagram on
the right for connecting the
speakers to the 5-D Pro Audio
system designed by the Better
Music Builder engineering team.
The concept of 5-D Pro Audio
technology is the same as that
of the 3-D Positional Audio
technology. The 5-D Pro
Audio technology factors in
the echo and reverb
generated by the size and
shape of the room as well as
the materials used in the
construction of the room into
the Digital Signal Processing
equation. The control
feedback can easily be done
from the front panel as with
the adjustment of vocal and
music effects between the
center and main speakers.
SUBWOOFER
DFS-112 SUB
CONNECTING THE SPEAKER WITH 3-D POSITIONAL AUDIO (PREMIUM FORMAT)
Please refer to the diagram on
the right for connecting the
speakers to the 3-D Positional
Audio system designed by the
Better Music Builder
engineering team.
With 3-D Positional Audio
technology, user can actually
experience the following effects:
• Music and sound effects are
live-like and real.
• Sound remains clear at low
volume.
• Reveals natural depth and
details.
• Music is natural and brilliant
with strong bass.
• Superior dialog clarity.
BASS POWERED
SUBWOOFER
DFS-112 SUB
2-WAY FULL RANGE SPEAKER O-6
CENTER MONITOR DFS-306
NL4 SPEAKON TYPENL4 SPEAKON TYPE
2-WAY FULL RANGE SPEAKER O-10
NL4 SPEAKON TYPE
2-WAY FULL RANGE SPEAKER O-10
NL4 SPEAKON TYPE
2-WAY FULL RANGE SPEAKER O-10
CENTER MONITOR DFS-306
NL4 SPEAKON TYPENL4 SPEAKON TYPE
2-WAY FULL RANGE SPEAKER O-10
3-D POSITINOAL AUDIO DX-222 G2
CPU INTE GRATE D MI XING AMPL IFIE R DX- 222 G 2
IR
#
INPUT
< PRE V
NEXT >
ENTER
PANEL
SETT INGS
LOADING...
PO WE R
Better Musi c Builder
Passionate about Music
®
1 G AIN BA SS MID TRE BLE
2 3GAIN BA SS MID TREB LE
MICR OPHO NE 1/4
DELAY R EPE AT TIME R EVE RB
ECHO EFFE CT
SUB BAS S MID TRE BLE
MUSI C TO NEMICR OPHO NE 2/3 /5
KEY CONT ROL
G2 SERIES
Gener atio n 2
ECHO VOL UME
MIC MAST ER MUSI C VOL UME
MAIN SEL ECTO R
MIN MIN M IN
MAX MAX
MAX
FEED BACK DES TROY ER
NL4 SPEAKON TYPE
2-WAY FULL RANGE SPEAKER O-6
NL4 SPEAKON TYPE
INPUTINPUT
INPUT INPUT
INPUT INPUT
5-D PRO AUDIO DX-288 G2
CPU INTE GRATE D MI XING AMPL IFIE R DX- 288 G2
IR
#
INPUT
< PRE V
NEXT >
ENTER
PANEL
SETT INGS
LOADING...
PO WE R
Better Musi c Builder
Passionate about Music
®
1 G AIN BA SS MID TRE BLE
2 3GAIN BA SS MID TREB LE
MICR OPHO NE 1/4
DELAY R EPE AT TIME R EVE RB
ECHO EFFE CT
SUB BAS S MID TRE BLE
MUSI C TO NEMICR OPHO NE 2/3 /5
KEY CONT ROL
G2 SERIES
Gener atio n 2
ECHO VOL UME
MIC MAST ER MUSI C VOL UME
MAIN SEL ECTO R
MIN MIN M IN
MAX MAX
MAX
FEED BACK DES TROY ER
O-6 Rear View
9
FRONT & REAR PANEL: features are available for 2-WAY FULL RANGE SPEAKER model O-10
CONTROLS AND FUNCTIONS
FRONT & REAR PANEL: features are available for 2-WAY FULL RANGE SPEAKER model O-6
Speak er
3-INCH TWEETER: PAPER CONE MID-HIGH FREQUENCY DRIVER
3-INCH TWEETER: PAPER CONE MID-HIGH FREQUENCY DRIVER
6-INCH WOOFER: PAPER CONE LOW FREQUENCY DRIVER
ROUND HANGING COVER: THREE 8mm SCREW SIZE
SPEAKER INPUT TERMINAL (NL4 Speakon TYPE)
FRONT GRILL COVER: AVAILABLE IN FOUR COLORS
[RED / SILVER / BLACK / BROWN]
1
2
3
4
5
6
O-6
O-6 Front View
1
3
2
4-INCH TWEETER: PAPER CONE MID-HIGH FREQUENCY DRIVER
4-INCH TWEETER: PAPER CONE MID-HIGH FREQUENCY DRIVER
10-INCH WOOFER: PAPER CONE LOW FREQUENCY DRIVER
ROUND HANGING COVER: THREE 8mm SCREWS SIZE
SPEAKER INPUT TERMINAL (NL4 Speakon TYPE)
FRONT GRILL COVER: AVAILABLE IN FOUR COLORS
[RED / SILVER / BLACK / BROWN]
1
2
3
4
5
6
O-10
O-10 Front View O-10 Rear ViewO-10 Top View
1
3
2
4
6
O-6 Top View
4
6
O-10 Rear Connector
O-6 Rear Connector
5
5
2–
1–
1+ 2+
REFERENCE CONNECT
CONNECT TO AMP.
2–
1–
1+ 2+
REFERENCE CONNECT
CONNECT TO AMP.
Ceiling
Better Music Builder
Ceiling
2
6mm SCREW
MOUNTING KIT
10
SYSTEM SETUP GUIDELINES
INSTALLATION SETUP
Follow the steps described in the diagram for mounting the
speaker to the ceiling and wall. Use the right screws to mount
the speaker onto the ceiling or wall.
Please note that the ceiling and wall mounting accessories
and tools are not included in the package. You may order it
separately from our authorized dealers.
1. MOUNTING THE SPEAKER TO THE CEILING
STEP : Hold the ceiling mount panel under the ceiling,
then put four screws to fasten it.
The structure of the ceiling must be strong enough to hold at
least 50 pounds.
Set Up
We recommend that the
speakers be tiled at an angle, so that
it aims at audience’s ear level in order
to achieve the best accoustic quality.
NOTE
20 Feet
-6 dB
80 Degree
-6 dB
ADJUSTABLE
ANGLE
Ceiling
STEP : Place the ceiling mount panel on the top of the
speaker cabinet and put three screws to fasten it.
3
1
NOTE
STEP : Four 6-mm screws come with the package. Three
6-mm screws already mounted on the speaker top. Only one
6-mm screw is provided for mounting kit as indicated in the
following diagram.
2
Ceiling
1
8mm SCREW
3
6MM SCREW
CEILING MOUNT BRACKET
The ceiling mount bracket is optional. You may order it from
our authorized dealers near you. Please note that the ceiling
mount is different from the wall mount.
Better Music Builder
ADJUSTABLE
ANGLE (Up & Down)
Better Music Builder
11
2. MOUNTING THE SPEAKER TO THE WALL
STEP : Place the wall mount panel on the wall and put
three or more screws to fasten it.
The structure of
the wall must be strong
enough to hold up to
100 pounds.
1
Mounting to Solid Wood or Wood Studs
In North America, most of the houses have 2”x4” wood studs
inside the panel walls. You may use stud finder to locate the
wood studs. Then, you can drive the screw into the wood
stud to mount the speaker bracket and hold it firmly.
PANEL WALL
2”X4” WOOD STUD
Ceiling
NOTE
This Wall Mount Bracket can be a Ceiling Mount
Bracket
Wall
6mm SCREW
2
MOUNTING KIT
Wall
Better Music Builder
3
6mm Screw
STEP : Place the wall mount panel on the top of the
speaker cabinet and put three screws to fasten it.
3
ADJUSTABLE
ANGLE
STEP : One 6-mm screw is provided for mounting kit as
indicated in the following diagram. Make sure that you use
the right kinds of screws to mount the speaker onto the wall or
ceiling which are made up of different construction materials
(i.e. wood or concrete, etc.).
2
Wall
1
8mm SCREW
CEILING MOUNT BRACKET
The wall mount bracket is optional. You may order it from our
authorized dealers near you. Please note that the wall mount
is different from the ceiling mount.
ADJUSTABLE
ANGLE (Up & Down)
ADJUSTABLE
ANGLE (Left & Right)
12
3. PLACING THE SPEAKERS ON THE PORTABLE
STAND
The speakers can be mounted on to the optional portable
stand, (see figure below). Make sure that the mounting system
(hardware, stand, etc.) is capable of supporting four times the
weight (approximately 25 lbs per speaker) of the speakers.
Floor Stand Mounting Kit Bracket
The speaker mount bracket for floor stand is optional. You
may order it from our authorized dealers near you. Please
note that the wall mount is different from the ceiling mount.
4. HOW TO OPEN GRILL COVER
STEP : Clench fist, and then knock the upper-right side of
the cabinet with fist.
STEP : After the cabinet was knocked, the grill cover will
be loosened and there will have a small gap
between the cabinet and grill cover.
STEP : Insert a straight screwdriver into the gap, and pry
the grill cover off the cabinet with the straight
screwdriver.
PARTS FOR MAINTENANCE
For repair and maintenance, you can order the following
parts indicated with numbers below from our authorized
dealers. The following parts include:
FRONT GRILL COVER: O-6
Part Number: 360EDO6COV-R
O-6 Part Number: 360EDO6COV-W
O-6 Part Number: 360EDO6COV-BL
O-10 Part Number: 360EDO10COV-R
O-10 Part Number: 360EDO10COV-W
O-10 Part Number: 360EDO10COV-BL
CABINET: O-6 Part Number: 360EDO6CNT
O-10 Part Number: 360EDO10CNT
WOOFER (LF): O-6 Part Number: 06TP035-8
O-10 Part Number: 10LB075-U
TWEETER (HF): O-6 Part Number: 20100428
O-10 Part Number: ED4001A
CROSSOVER: O-6 Part Number: QS600ND100525048
O-10 Part Number: EGS015-42-B
1
2
3
5
4
5
CROSSOVER
1
FRONT GRILL COVER
2
CABINET
3
WOOFER (LF)
BACK VIEWFRONT VIEW
4
TWEETER (HF)
Better Music Builder
C1
12.0J 250V
MET CH
605J
MPT250
C2
(ph)2OW8ROJ
R1
(ph)2OW8ROJ
R2
EGS015-42-B
(ph)2OW8ROJ
R4
(ph)2OW8ROJ
R3
P2
P3
HI1– HI1+
HI2+
HI2–LOW–
IN+
IN–
LOW+
WOOFER TWEETER TWEETER
AMPLIFIER
O-10
CROSSOVER
20W4ΩJ
R1
10K/1W
065/60V
HI1+ HI2+HI1–
IN–
IN+
LOW–LOW+ HI2–
WOOFER
TWEETER TWEETER
AMPLIFIER
O-6
CROSSOVER
4.7J 100V
MET CH
4.7J 100V
MET CH
FRONT VIEW BACK VIEW
TOP VIEW
SPEAKER STAND
Part Number: AMS001B (Optional)
MOUNTING KIT
BRACKET
CABINET
KNOCK THE
UPPER-RIGHT
GRILL COVER
3
1
2
13
HIGHLIGHTED
FEATURES
SPECIFICATIONS
Spec
FREQUENCY
RESPONSE
MAX. POWER
HANDLING
SUPPORTED
FIXTURE
WOOFER [LF]
TWEETER [HF]
“SPOT” RANGE
CROSSOVER
FREQUENCY
CABINET TYPE
SENSITIVITY
TYPE
MODEL
COLOR AVAILABLE
RED
SILVER
BLACK
BROWN
Front
160~320 Watts
Polypropylene Injection
Moulding
6” (1 unit)
Compression Driver
80Hz ~ 16kHz
88 dB
2.5 kHz
Dynamic Vocal Effect
Ceiling Mount,
Wall Mount,
Floor Stand
3” (2 unit)
O-6
Front
300~600 Watts
Polypropylene Injection
Moulding
10” (1 unit)
Compression Driver
45Hz ~ 20kHz
90 dB
2.5 kHz
Dynamic Vocal Effect
Ceiling Mount,
Wall Mount,
Floor Stand
4” (2 unit)
O-10
2-WAY FULL RANGE PRO SPEAKER
PHYSICAL DIMENSIONS
Dimensions
2-WAY FULL RANGE PRO SPEAKER
MODEL
NET WEIGHT
SHIPPING WEIGHT
DIMENSIONS
(WXHXD)
PACKING
DIMENSIONS
(WXHXD)
O-10
21.7x12.4x13.2 in
55x31.6x33.6 cm
24.4x15.2x16.7 in
62x38.5x42.5 cm
(each)
19.8 Lbs / 9 Kg
(each)
24.3 Lbs / 11 Kg
(each)
O-6
15.7×9×9.4 in
40×23×24 cm
17.8×10.6×12.2 in
45.2×27×31 cm
(each)
9.9 Lbs / 4.5 Kg
(each)
11 Lbs / 5 Kg
(each)
O-6
Side View
9.4 inch
24 cm
9 inch
23 cm
15.7 inch
40 cm
Back View
9 inch
23 cm
15.7 inch
40 cm
Bottom View
9.4 inch
24 cm
15.7 inch
40 cm
Top View
15.7 inch
40 cm
Front View
9 inch
23 cm
9.4 inch
24 cm
O-10
Side View
13.2 inch
33.6 cm
12.4 inch
31.6 cm
21.7 inch
55 cm
Back View
12.4 inch
31.6 cm
21.7 inch
55 cm
Bottom View
13.2 inch
33.6 cm
21.7 inch
55 cm
Top View
21.7 inch
55 cm
Front View
12.4 inch
31.6 cm
13.2 inch
33.6 cm
14
TROUBLESHOOTING
1. SYMPTOM: NO SOUNDS COMING OUT FROM THE
SPEAKERS
Probable cause:
1. The A/C power of the speaker is not turned on.
2. Choose the wrong A/C power selection (i.e. 110V~
220V).
Remedy:
A. Turn on the A/C power of the speaker.
B. Check the receiver or amplifier if it is on and the source is
playing.
C. Check all wires and connections between receivers,
amplifiers and speakers. Make sure all wires are connected.
None of the speaker wires are frayed, cut or punctured, and
no wires are touching each other.
D. Review proper operation of your receiver or amplifier.
E. Choose the right A/C power.
2. SYMPTOM: NO SOUNDS COMING OUT FROM ONLY
ONE SPEAKER
Probable causes:
The A/C power of the speaker is not turned on.
Remedy:
A. Check the "Balance" control on your receiver or amplifier.
B. Check all wires and connections between receiver,
amplifier and speaker. Make sure all wires are connected.
Make sure none of the speaker wires are frayed, cut or
punctured, and that no wires are touching each other.
C. In Dolby
®
Digital or DTS
®
mode, make sure that the
receiver or processor is configured so that the speaker in
question is enabled.
D. Turn off all electronics and switch the speaker in question
with one of the other speakers that is working correctly. Turn
everything back on, and determine whether the problem is in
the same place: i.e., the speaker that was working previously
now has no sound and the speaker that was not working
now sounds fine; or whether it has moved; i.e., the speaker
that was not working still has no sound and the speaker that
was working is still fine. If the problem is in the same place,
the source of the problem is most likely with your receiver or
amplifier, and you should consult the owner's manual further
information. If the problem has followed the speaker, consult
your dealer for further assistance, or visit our web site for
technical support.
3. SYMPTOM: NOISES FROM THE SPEAKER.
Troubleshooting
Probable causes:
The A/C power cord of the speaker is not grounded.
Remedy:
Change a new magnet cord of the A/C power cord.
4. SYMPTOM: MICROPHONE VOLUME IS TOO LOW.
Probable causes:
A. The microphone is poorly connected to the speaker.
B. The volume on the speaker is too low.
Remedy:
A. Check the connection between the microphone and the
speaker. Make sure that they are connected properly. For
condense microphone, it doesn't work with the speaker. You
may need to change to a dynamic vocal microphone.
B. Turn the volume to an appropriate level. If the volume is
still not high enough, you may need to upgrade your existing
audio system to a system with much higher output.
5. SYMPTOM: CRACKING NOISES FROM THE SPEAKER.
Probable causes:
The tweeter may burn out.
Remedy:
Change a new tweeter.
Note: we recommend you hiring a professional to help you
change a tweeter in order to do it properly.
6. SYMPTOM: SOUNDS LIKE DAZZ, DAZZ, DAZZ ........
COMING FROM THE SPEAKER.
Probable causes:
The speakon cable (with small gauges) is over 100 feet for
connection.
Remedy:
Change to a cable with 12 or 14 gauges or a high quality
cable with bigger size.
7. SYMPTOM: TOO MUCH MICROPHONE FEEDBACK
FROM THE SPEAKER.
Probable causes:
Incorrect tremble and bass adjustments on the speaker.
Remedy:
Adjust the tremble and bass to an appropriate level to avoid
the microphone feedback.
15
FINAL WORDS TO USER
The engineering team of Better Music Builder has many
years of experience in audio equipment design. The team
constantly develops new audio technologies, designs
innovative audio and Karaoke equipment to suit your specific
needs and provides you great ideas for home entertainment.
Our engineering team also designs audio equipment for
commercial use by restaurants, coffee shops, churches, and
school auditoriums, etc. If the commercial area for audio
equipment installation exceeds 2,000 square feet, we highly
recommend you to hire audio professionals to handle the
installation in order to avoid risks in breaking the equipment
with improper installation and safety protection purposes.
We also provide educational and technical information on
audio equipment and technologies. For example, we provide
free installation diagrams to make it easier to connect the
system. In addition, to get best connections for the sharpest
image and sound quality, we provide hot tip for choosing
the high quality type of A/V cable connections. Free
information on audio equipment and technologies available
for download from our website,
ww w.Bet terMusicBuilder.com.
Please do not remove the “Yellow Label”
in the rear of the machine; otherwise, the
warranty will be void automatically. We
design it to protect your own safety. If
repair and maintenance service is needed,
please contact us directly or hire a
professional technician. To learn more
about the technical aspects, visit our website
ww w.Bet terMusicBuilder.com and download the
relevant information for review.
Before hooking up the system, turn off the AC powers on all
machines including audio/video equipment and TV.
Otherwise, it may damage the equipment, especially on the
HDTV in which a spot might appeared on the TV screen.
After hooking up the system, double check the audio/video
connections to ensure that they are connected correctly.
Sometimes, loose or poor cable quality would affect
the microphone effects, picture quality, or even cause the
machine to shut down suddenly.
Again, we must thank you for choosing Better Music Builder
product. We hope you can make the best use of the
machine and enjoy it for years to come. If you have any
questions regarding our product, please feel free to contact
us at ww w.BetterMusicBuilder.com.
Final Words
NOTE
Any form of
tampering with this
product, will void
the warranty.
8. SYMPTOM: NO SOUND FROM THE MAIN SPEAKERS
Probable causes:
Speakon connectors are not connected properly.
Remedy:
Please make sure that the speakon connectors are locked it
tight. Please also note that there are two groups of speakon
connectors (i.e. Group 1 +1, –1, Group 2 +2, –2). Make
sure that your speakers have the multifunction that enable the
connection to the Group 2 for different signal inputs. The
basic connection is on Group 1 (+1, –1).
9. SYMPTOM: SOMETIMES THE SPEAKERS HAVE NO
SOUND.
Probable causes:
When the master volume closes to the maximum level, so the
speaker automatically shut down with no sound. It is because
this speaker has a built-in auto circuit to protect the speaker
when the master volume becomes too high.
Remedy:
Change to a higher power amplifier to work with the
speakers. Please make sure the output power of the amplifier
can match that of the speakers. Another option is to add
more speakers or subwoofers for higher output as below.
1. Add one more loudspeaker.
2. Add one more powered subwoofer.
We highly recommend you hiring an audio professional to
advise you on the right engineering for the amplifier and
speakers.
16
WARRANTY
ONE-YEAR LIMITED WARRANTY FOR HOME USE
EQUIPMENT
Our one-year warranty covers both parts and labors. The
warranty becomes effective from the date of your purchase
for one year.
Our warranty only covers defects due to product
defectiveness with free of defects in materials or
workmanship. However, our warranty does not cover defects
due to normal wears, damage in transit, improper use, abuse
or failure to follow the proper instructions for maintenance.
This warranty is void in the event of unauthorized repairs,
alternations, modifications and removing of the product label.
Please also note that our warranty does not cover any
shipping cost for the return of defective products to us for
inspection, repair and maintenance. Our warranty for Better
Music Builder products can only be executed in North
America.
90-DAY LIMITED WARRANTY FOR PUBLIC AND
COMMERCIAL USE EQUIPMENT
Our 90-day warranty applies to speakers, amplifiers, mixers
and microphones for both public and commercial use such as
restaurant, coffee shop, KTV nightclub, church and school,
etc. It covers both parts and labors. The warranty becomes
effective from the date of your purchase for 90 days.
Our warranty only covers defects due to product
defectiveness with free of defects in materials or
workmanship. However, our warranty does not cover defects
due to normal wears, damage in transit, improper use, abuse
or failure to follow the proper instructions for maintenance.
This warranty is void in the event of unauthorized repairs,
alternations, modifications and removing of the product label.
Please also note that our warranty does not cover any
shipping cost for the return of defective products to us for
inspection, repair and maintenance. Our warranty for Better
Music Builder products can only be executed in North
America.
Warranty
ADDITIONAL NOTES:
1. Limited warranty for home use equipment is only valid in
North America.
2. Limited warranty is valid only if you purchase our products
from our authorized dealers (including both regular retailers
and online retailers) in North America. If you choose to
purchase our products from an authorized dealer, we will not
provide any limited product warranty for you. To protect your
limited product warranty, please purchase our products from
one of our authorized dealers in North America near you.
3. Limited warranty is automatically void if the yellow label
stating “No Warranty After Opening” is removed from the
product.
TO REGISTER YOUR WARRANTY
Please fill out the warranty card that came with your unit,
download or submit online warranty form. However, we need
the invoice for your purchase in order to process this warranty.
You may also register your warranty online.
Please visit our website at ww w.bettermusicbuilder.com.
17
AGENCY REGULATORY NOTICES
Federal Communications Commission Notice
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television
technician for help.
Modifications
The FCC requires the user to be notified that any changes or
modifications made to this device that are not approved may
void the user’s authority to operate the equipment.
Cables
Connections to this device must be made with shielded cables
with metallic RFI/EMI connector hoods to maintain
compliance with FCC rules and regulations.
Materials Disposal
Disposal of this material can be regulated because of
environmental considerations. For disposal or recycling
information, contact your local authorities or the Electronic
Industries Alliance (EIA) (http://www.eiae.org).
Disposal Of Waste Equipment By Users In
Private Households In The European Union
This symbol on the product or on its packaging indicates that
this product must not be disposed of with your other
household waste. Instead, it is your responsibility to dispose of
your waste equipment by handing it over to a designated
collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of
your waste equipment at the time of disposal will help to
conserve natural resources and ensure that it is recycled in a
manner that protects human health and the environment. For
more information about where you can drop off your waste
equipment for recycling, please contact your local city office,
your household waste disposal service or the shop where you
purchased the product.
Japanese Notice
Japanese Power Cord Notice
Japanese Material Content Declaration
A Japanese regulatory requirement, defined by Specification
JIS-C-0950, 2005, mandates that manufacturers provide
Material Content Declarations for certain categories of
electronic products offered for sale after July 1, 2006.
Korean Notice
Recycling Program
The terms and availability of these programs vary by
geography because of differences in regulatory requirements
and local customer demand.
因为在当地的监管要求和客户的需求，这些条件和程序的情
况不同。
Notices
18
CONTACT INFORMATION
MAILING ADDRESS
Better Music Builder
29300 Kohoutek Way #150
Union Cit y, CA 94587
U.S.A.
TELEPHONE NUMBERS
USA Region
USA Toll Free: 1-800-318-2218
Sales & Marketing: 510-477-9955
Customer Service: 510 -477-9955
FAX NUMBERS
USA Region
Sales & Marketing: 510-477-9922
Customer Service: 510 -477-9922
WORLD WIDE WEB
E-mail: sales@bettermusicbuilder.com
Website: w w w.bettermusicbuilder.com
MAINTENANCE
With proper maintenance and regular service, it would maintain the machine quality and prolong its life. We
recommend you to print the following information clearly for future reference on maintenance and warranty.
MODEL#____________________________ DATE PURCHASED (MM/DD/YYYY)_____________________________
DEALER NAME_____________________________ CITY_____________ ST./PROV._______ ZIP/P.C.____________
DEALER WEBSITE http://www.______________________________________________ INVOICE #_____________
DEALER PHONE #_____________________________ DEALER E-MAIL______________________________________
Contact Us
19
MAINTENANCE
NOTE
Thank you for purchasing this unit. To make full
and effective use of this unit, please read this
Owner's Manual carefully before operating it.
Please retain this manual for future reference.
Passionate about Music
www.BetterMusicBuilder.com
Unlike any others ... that’s cost & value for you
®
®
Comments E-mail to info@bettermusicbuilder.com Copyright © 2010 Better Music Builder. All rights reserved. Legal trademark.Printed on 100% Recycled Paper Code: 20100801
360100804200
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Better Music Builder O-10 Owner's manual

Better Music Builder
Brand
Better Music Builder
Model
O-10
Category
Soundbar speakers
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents