Maxon TSD-4000 Series User manual

Brand: Maxon

Model: TSD-4000 Series

Category: Two-way radios

Type: User manual

This manual is also suitable for

Maxon TSD-4000 Series is a versatile communication device designed for professional use in various industries. With its range of features and capabilities, it offers reliable and efficient communication solutions. Here's a brief overview of its key features:

Tri-Mode Operation: The TSD-4000 Series supports both digital and analog communication, ensuring compatibility with existing analog systems and a smooth transition to digital technology.
Long Battery Life: The device boasts impressive battery life, providing up to 23 hours of operation in digital mode and 14 hours in analog mode, enabling extended usage without frequent recharging.

Tri-Mode Operation: The TSD-4000 Series supports both digital and analog communication, ensuring compatibility with existing analog systems and a smooth transition to digital technology.
Long Battery Life: The device boasts impressive battery life, providing up to 23 hours of operation in digital mode and 14 hours in analog mode, enabling extended usage without frequent recharging.

Printed in Korea

11535 W. 83rd Terrace, Lenexa, KS 66214

Toll-Free: 800-456-2071 (US Only), 913-859-9515

Website: www.maxonamerica.com

TSD-4000 Series

(DMR/Analog)

TSD-4116 (VHF)

TSD-4416 (UHF)

User’s Manual

11535 W. 83rd Terrace, Lenexa, KS 66214

Toll-Free: 800-456-2071 (US Only), 913-859-9515

Website: www.maxonamerica.com

Table of Contents

Thank you for purchasing the TSD-4000 Series radio

1. Before operating the radio, please read the user manual carefully.

2. Functions and specifications are subject to be changed without notice for improvement of the radio

performance.

1. Specifications

2. Features

3. In-Box Contents

4. Controls & Appearance of TSD-4000 Series radio

5. Battery and Belt Clip Installation and Removal

6. Charging the Battery

7. Function & Operation

8. Precautions for Safe Operation

9. For Safe Operation

10. Warranty Statement

www.tecnetusa.comwww.tecnetusa.com

www.maxonamerica.com

1. Specifications

2. Features

TSD-4000 Series Radio Specifications

Frequency Range

Digital

Programmable Channels

Dimensions (H/W/D)

Weight w/battery

Power Source

Sensitivity

RF Power Output

Audio Power Output

Frequency Stability

Channel Spacing

Digital Vocoder

Dust and Water Protection

U.S. Military Standard

Operating Temperature

Storage Temperature

TSD-4116: 136 ~ 174 MHz

TSD-4416: 400 ~ 470 MHz

DMR Tier II TDMA

512 Channels: 16 Channels with 32 Zones per channel

4.6 x 2.16 x 1.33

(118x55x34 mm)

234g

DC +7.4V Li-ion 2,600mAH Battery

0.25

12 dB SINAD (Analog)

0.22

/BER 5% (Digital)

5/1 Watt (UHF & VHF)

1 Watt

1.5 PPM (-30° to +60° C)

25/20/12.5 kHz (Analog) 12.5 kHz (Digital) 2 Time Slots of 6.25 Each

AMBE3000 Vocoder Chip with AMBE+2 Voice Compression Algorithm

IP-54

MIL-STD 810F/G

-30°C to +60°C

-40°C to +85°C

1. AES Encryption (128, 192, 256)

2. Channel Tri-Mode (Digital, Analog, Mixed): compatible with the prevalent analog system,

ensuring a smooth analog-to-digital transition. Mixed mode allows your digital radio to receive

current analog radios yet transmit digitally to other DMR radios.

3. Long Battery Life: 14hours (Analog) / 23 hours (Digital) on 90/5/5 duty cycle

4. CTCSS / DCS

3. In-Box Contents

Radio

Battery

Dual Slot Charger Antenna

Belt clip

DC Adaptor

User Manual

Contents subject to change at buyer’s request.

www.maxonamerica.com

4. Controls and Appearance of TSD-4000 Series Radio

Power ON/OFF Volume Knob

Turns the radio on and off & adjusts the audio

volume level.

Channel Knob

Change channels by turning the control knob

clock-wise or counter-clockwise. 16 Channels can be

inputted into each zone. A voice response will notify

the user when the channel has been changed.

If the channel is not assigned, the radio will beep.

PTT Button

Press the PTT button to transmit voice. Release the

PTT button to receive voice. It is recommended to talk

to 4 away from the microphone.

P Button

Default function of this button is to easily toggle

between high transmit power and low transmit power to

save battery life. This button can be reassigned

through radio programming.

M Button

Default function of this button is to Monitor the open

channel. This button can be re-assigned through radio

programming.

TOP Button (Orange)

Default function of this button is Emergency / SOS ,

This button can be assigned a different function

through radio programming.

Speaker/MIC Jack

Accessory connector is used to connect an external

speaker microphone or a headset. If it is not used, the

cover should remain closed to prevent dirt from

entering the radio.

Status LED

Used to determine Rx/Tx status and battery charge

level.

5. Battery and Belt Clip Installation and Removal

6. Charging the Battery

How to install the battery How to remove the battery

Pull the battery lock down and remove the battery

by sliding it toward the arrow

Attached when the battery pack is pushed up.

Safety Notes

1. TSD-4000 Series radios use a high-performance, 2600 mAh Li-ion battery (TSA-4260).

2. Please charge the battery before using the radio. Use only the recommended charger for best

results.

Charging Information

Low battery voltage may reduce communication coverage and affect the radio’s performance.

Please charge the battery in case of following:

1. When radios performance has degraded.

2. When the RX/TX LED on the radio blinks red (every 0.5 second), during idle, transmission, or

reception.

Three audible beeps will be heard in this state and functionality will be affected.

Belt clip installation: Align belt clip to the radio as in the

1st illustration and then slide belt clip down as illustrated until the

belt clip lock clicks.

Belt clip removal: Pull the belt clip lock away from the back

of the radio as in the 2nd illustration (Direction arrow #1) and, at the

same time, slide the belt clip up and out of the locking bracket

(Direction arrow #2).

www.maxonamerica.com

How to Charge

1. Make sure power adaptor for the Dual Slot charger is plugged into the charger and then plug the

power adapter for the TSA-0400 charger into a AC120V power outlet.

2. Turn off the radio before charging.

3. Insert radio into the charger’s larger, front charging port with the charging contacts on the outside

of the radio lined up with the contacts on the charger. LED labeled

F on the charger will turn on

when the connection is made.

4. If charging the battery only, line up the outside contacts of the battery with the charging contacts

on the 2nd, smaller charging slot in the rear of the dual charger and then insert the battery. LED

labeled

R on the charger will turn on when the connection is made.

5. It is recommended to charge another 30 minutes after the LED turns green for a complete charge.

Status

Charging

Complete charging

LED indication

Red LED lights

Green LED lights

Status

Detecting Error

Keep Charging

LED indication

Red LED blinks

Green LED lights

TSA-0400 Dual Slot Battery Charger and Power Adaptor

Charger (TSA-0400)

7. Function and Operation

Function Status LEDButton & Setting Descriptions

Power

ON/OFF

ON/OFF/Volume

Control Knob

Orange

Receive

(RX)

Green

Transmit

(TX)

PTT Button

High Power: Red

Low Power: Orange

Power up chime is heard then current

radio channel selected will be spoken.

If radio is on an unprogrammed

channel, radio will beep. LED will be

orange during power up.

Press and HOLD PTT to talk, release

to listen. Other buttons can be

programmed with the PTT function

through your dealer’s software.

Channel

Change

Channel knob

Flashes Orange

during channel

switch

Adjust TX

Output

Power

(P) Button

*Programmable Button

Orange

Monitor

(M) Button

*Programmable Button

Emergency

Orange button on top.

*Programmable Button

Switch Zone

PC programmable

function

Voice notification

Green w/ Voice

notification

Turn the channel knob to the channel

you want. Voice will state what channel

you are on. If channel is not

programmed, radio will beep.

You can toggle between High Transmit

(TX) power and Low TX power by

pressing the

P Button. Voice

announcement will indicate High or

Low Power setting.

User can check whether the Receive

Transmission (RX) of current channel

is OK or Not. Press and release the

(M) button to open the squelch on an

analog channel.

In an emergency, press the orange

colored Emergency button for 3

seconds to activate a siren & transmit

an emergency call to your party.

Allows you to change the calling area

to use more channels

VOX

PC programmable

function

Voice notification

Used for transmitting voice without

pressing the PTT Button

SCAN

PC programmable

function

Voice notification

Scan button initiates the scan of each

channel in the scan list for activity. If

channel is busy, the radio stops scan

and received audio is heard. Scan

resumes when hang timer expires.

Normal & Priority Scan are available.

Steady green for decode. If channel is

busy, the LED blinks.

www.maxonamerica.com

Stun/Revive

PC programmable

function

Voice notification

Used to disable and then revive radio

remotely via another radio

Remote

Check

PC programmable

function

Voice notification

Checks whether target radio in your

contact list is receiving.

Encryption

(Digital Channel

Only)

PC programmable

function

Voice notification

Uses AES Encryption (128, 192, 256) to

scramble & unscramble voice

transmissions for privacy.

Remote

Monitor

PC programmable

function

No indication on

target radio

Turns on radio’s microphone to monitor

any audible activity surrounding the

target radio.

Keypad

Lock/Unlock

PC programmable

function

Voice notification

Locks and unlocks the keypad. This

feature prevents accidental key presses

Talkaround /

Repeater

PC programmable

function

Voice notification

Switches the current channel from

repeater mode to talkaround mode and

visa-versa.

8. Precautions for Safe Operation

Don’t transmit with antenna detached from the radio and do not damage or change antenna type.

Strong electronic waves are emitted from the radio, and damage or changes to the antenna may affect

the performance of the radio and may cause the radio to be defective and not covered under warranty.

Don’t use other manufacturers accessories. Unknown or unauthorized accessories may cause the

radio to be defective and not covered under warranty.

Avoid excessive shock to the radio.

Do not place the radio where the direct sunlight or high temperature occurs.

Do not damage battery pack with a sharp object or excessive shock.

Turn off the radio before boarding an airplane.

Do not use the radio in a hospital without pre-approval.

Radio may cause interference around computers or other electronics devices.

Please keep the radio at least 1 inch away from the human body.

Any damage to the antenna, may cause RF exposure.

When using earphones, please reduce the volume to a low level. Unexpected high volume may have

harmful effects to your ear.

Do not touch the conductive metal of the battery radio with wet hands. It may cause damage on your

hands.

Please be careful when putting the battery in a pocket or a bag to avoid contact with metal.

9. For Safe Operation

•

FCC RF EXPOSURE COMPLIANCE REQUIREMENTS FOR OCCUPATIONAL USE ONLY

The Federal Communications Commission (FCC), with its action in General Docket 93-62, November 7, 1997, has

adopted a safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC

regulated equipment. Proper operation of this radio will result in user exposure far below the Occupational Safety and

Health Act (OSHA) and Federal Communications Commission limits.

•

DO NOT

transmit for more than 50% of total radio use time (50% duty cycle). Transmitting more than 50% of the

time can cause FCC RF exposure compliance requirements to be exceeded.

•

This radio is NOT approved for use by the general population in an uncontrolled environment. This radio is restricted

to occupational use, work related operations only where radio operator must have the knowledge to control the user’s

exposure conditions for satisfying the higher exposure limit allowed for occupational use.

•

When transmitting, hold the radio in a vertical position with its microphone 1 inches (2.5 cm) away from your mouth.

•

The radio is transmitting when the red LED on the front of the radio is illuminated. You can cause the radio to transmit

by pressing the PTT bar on the radio.

•

These are required operating configurations for meeting FCC RF exposure compliance. Failure to observe these

restrictions mean violation.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This

devices may not cause harmful interference and (2) This device must accept any interference received, including

interference that may cause undesired operation.

FCC Notice

10. Warranty Statement

Maxon America Inc. offers to the original end user:

One (1) Year Limited Warranty on TSD-4000 Series Radios (separate warranty

period on accessories).

One (1) Year Limited Warranty on Accessories (includes, but not limited to,

batteries, antennas, belt clips, chargers, audio accessories, nylon cases, leather

cases, etc.) .

Maxon warrants each new radio product manufactured or supplied by it to be free from defects in material

and workmanship under normal use and service for the time period stated, provided that the user has

complied with the requirements stated herein. The warranty period begins on the date of purchase from

an Authorized Dealer. This warranty is not assignable or transferable. This warranty is void if the product

serial number is altered, defaced or removed. Maxon is not responsible for any equipment that is attached

to or used in conjunction with our products.

During the warranty period, if the product fails to function under normal use, because of manufacturing

defects or workmanship, it should be returned to the Authorized Dealer from which it was purchased. The

Authorized Dealer will repair the product or return the product for repair to Maxon or its Authorized Repair

Depot. The user is responsible for the removal of the product from a vehicle or any equipment attached to

it, or other site of its use; transportation of the product to the Authorized Dealer; for the return of the

repaired or replacement product to the site of its use and for the reinstallation of the product.

Maxon shall have no obligation to make repairs or replacement of product which results from normal wear

and tear, or is necessitated by catastrophe, fault, or negligence of the user, improper or unauthorized

alterations or repairs to the product, incorrect wiring, use for which it was not designed or by causes

external to the product. Maxon’s sole obligation shall be to replace or repair the product covered by the

warranty. Replacement is done at Maxon’s discretion and may consist of a similar or higher featured

product. Repair may include the replacement of parts with functionally equivalent new or reconditioned

parts. All replaced parts and accessories are warranted for the balance of the original time period. All parts

and accessories that are replaced become the property of Maxon America Inc.

THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES,

EITHER EXPRESSED OR IMPLIED OR STATUTORY, INCLUDING, WITHOUT LIMITATION, ANY

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

FOR ANY PRODUCT THAT DOES NOT COMPLY WITH THE WARRANTY SPECIFIED, THE SOLE

REMEDY WILL BE REPAIR OR REPLACEMENT. IN NO EVENT WILL TECNET BE LIABLE FOR ANY

DAMAGES, INCLUDING ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES,

OR THE LOSS OF PROFIT, REVENUE OR DATA ARISING OUT OF THE USE OF OR THE INABILITY

TO USE THE PRODUCT

www.maxonamerica.com

Maxon TSD-4000 Series User manual

Brand: Maxon

Model: TSD-4000 Series

Category: Two-way radios

Type: User manual

This manual is also suitable for

Tri-Mode Operation: The TSD-4000 Series supports both digital and analog communication, ensuring compatibility with existing analog systems and a smooth transition to digital technology.
Long Battery Life: The device boasts impressive battery life, providing up to 23 hours of operation in digital mode and 14 hours in analog mode, enabling extended usage without frequent recharging.

Download PDF

report

Maxon TSD-4000 Series User manual

This manual is also suitable for

Maxon TSD-4000 Series User manual

Related papers

Other documents