Breville BEM800 Series User manual

Type
User manual
Breville Bench Mixer BEM800
Model:-BEM800
Total Version:-BEM800, BEM800/A, BEM800/B and BEM800/ C
Issue: - BEM800/C (latest version) Main power PCB is compatible after modification with BEM800,
Version A and Version B.
MODEL NO.
VERSION
PART NUMBERS HAVE TO CHANGE ALL BELOW PARTS AS ORIGINAL
INDIVIDUAL PARTS NLA
BEM800 MAIN PCB BEM800/700 BEM800/700C
BEM800/705C
BEM800/706C (LED-SPEED PCB ASSY)
Connect wires 3 & 4 together (as shown picture 1)
Connect wires 1 & 2 to ON/OFF switch (Terminal 1 &
2 ) (as shown Picture 2) No connection at Terminal 3
LCD- TIMER PCB ASSY (15 pin)
BEM800/705
LED- SPEED PCB ASSY (8 pin) NOT LISTED
BEM800/A MAIN PCB BEM800/700 BEM800/700C
BEM800/705C
BEM800/706C (LED-SPEED PCB ASSY)
Disconnect and discard wire 6, disconnect wire 5
from safety switch (as shown picture 3) and
reconnect to terminal B on main PCB, Connect wire
no 3 and 4 to safety switch (as shown picture 1)
Connect wires 1 & 2 to ON/OFF switch (Terminal 1 &
2 ) (as shown Picture 2) No connection at Terminal 3
LCD- TIMER PCB ASSY (15 pin)
BEM800/705
LED- SPEED PCB ASSY (8 pin) NOT LISTED
BEM800/B MAIN PCB BEM800/700B BEM800/700C
BEM800/705C
BEM800/706C (LED-SPEED PCB ASSY)
Connect wire no 3 and 4 to safety switch (as shown
picture 1)
Connect wires 1& 2 to ON/OFF switch (Terminal 1 &
2) (as shown Picture 2) No connection at Terminal 3
LCD- TIMER PCB ASSY (15 pin)
BEM800/705
LED- SPEED PCB ASSY (8 pin) NOT LISTED
BEM800/C MAIN PCB BEM800/700C BEM800/700C (NORMAL REPLACEMENT)
LCD- TIMER PCB ASSY (13 pin)
BEM800/705C
LED- SPEED PCB ASSY (9 pin) BEM800/706C
Breville Bench Mixer BEM800
BEM800 Version “C” PCB (Picture 1)
Breville Bench Mixer BEM800
BEM800 ON/OFF switch (Picture 2)
BEM800 Safety switch (Picture 3)
Breville Bench Mixer BEM800
BEM800 LCD- Timer PCB (Picture 4)
BEM800 LED Speed PCB (Picture 5)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Breville BEM800 Series User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI