8
Icons in this Manual
<6> : Indicates the Main Dial.
<5> : Indicates the Quick Control Dial.
<9> : Indicates the Multi-controller.
<W><X><Y><Z> : Indicates the direction of the shift or move when the
key on the Multi-controller is pressed.
<0> : Indicates the Setting button.
0/9/4/ : After you press an operation button, this indicates
7/8 how long (in seconds) the respective setting will
remain in effect after you let go of the button.
The respective time will be 4 sec., 6 sec., 8 sec., 10
sec., or 16 sec.
* In addition to the above, the icons and symbols used on the camera’s buttons
and displayed on the LCD monitor are also used in this manual when discussing
relevant operations and functionality.
3 : Indicates a function that can be changed by pressing the <M>
button to change its settings.
M : This icon on the right of the page title indicates that the function is
available only in the Creative Zone modes (<d>, <s>, <f>,
<a>, and <F>).
(p.***) : Reference page numbers for more information.
: Warning to prevent shooting problems.
: Supplemental information.
: Tips or advice for better shooting.
: Troubleshooting advice.
Notes About the Instructions and Sample Photos
All operations described in this manual assume that the power switch is
set to <1> and the <R> switch is set to the downward (Multi
function lock released) (p.47, 59).
It is assumed that all the menu settings and Custom Functions are set to
their defaults.
The illustrations in this manual show the camera attached with the
EF50mm f/1.4 USM lens as an example.
The sample photos displayed on the camera and used in this manual are
for instructional purposes only.
Conventions Used in this Manual