Lay the platform frame (part A) at on the oor
with the legs facing up.
A
STEP 1
STEP 2
STEP 3
STEP 4
A. Platform Frame (1 pc) B. Wide End Arch Leg
(2 pcs)
C. Narrow End Arch Leg
(2 pcs)
D. Bolt (10 pcs)
Arch Platform Frame
Contains One (1) Frame and Hardware
IMPORTANT NOTE:
Carefully remove all the parts from the carton. Arrange on a at
surface and verify you have all of the following parts and hardware.
PART AND HARDWARE LIST
TOOLS REQUIRED:
Phillips Screwdriver
ASSEMBLY INSTRUCTIONS
B C
D
D D
Insert the Narrow End Arch Leg (part C) into
the Wide End Arch Leg (part B). Secure using
one of the provided bolts (part D). Repeat this
process to assemble both arch legs.
Attach the arch legs to the frame using four of
the provided bolts (part D) per leg. Tighten the
bolts securely. Enjoy your new arch metal frame!
TWIN SIZE
Rotate the leg supports into position against the
pre-attached bolts and secure them in place by
rmly tightening the pre-installed wing nuts.
-
1
Rest Rite MFP00112BFTW Operating instructions
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Bowflex Ultimate 51370 Owner's manual
-
-
-
-
Gorilla Playsets 01-0082-RP Operating instructions
-
-
-
-
-