ACDelco 10372541 User manual

Brand: ACDelco

Model: 10372541

Type: User manual

This manual is also suitable for

10372542

ACDelco 10372541 is a key fob programming tool that allows users to match new keyless access transmitters with their vehicles. It is compatible with 2005-2007 Corvettes and can store up to four transmitters per vehicle. The device can also erase previously known transmitters, making it easy to replace lost or stolen keys.

INSTRUCTION SHEET

NOTE: Each keyless access transmitter is coded to prevent another

transmitter from working with your vehicle. If a transmitter is lost or

stolen, a replacement can be purchased. Each vehicle can have a

maximum of four transmitters matched to it.

TO MATCH A NEW TRANSMITTER TO YOUR VEHICLE WHEN YOU

HAVE A RECOGNIZED TRANSMITTER:

BEFORE YOU BEGIN:

1. The vehicle must be off.

2. Have the recognized and new, unrecognized transmitters on your

person.

PROGRAMMING INSTRUCTIONS:

1. Go to the rear of the vehicle and insert the vehicle key into the

key cylinder located above the license plate. See “Hatch” in your

Owner’s Manual for more information on the key cylinder.

2. Open the trunk.

3. Turn the key ﬁve times within ﬁve seconds.

4. The Driver Information Center (DIC) will display READY FOR FOB

#X, where X can be 2, 3 or 4.

5. Place the new, unrecognized transmitter in the glove box transmit-

ter pocket with the buttons facing towards the passenger’s side.

6. Once the transmitter is programmed, a beep will sound. The DIC

will display READY FOR #X, where X can be 3 or 4, or MAX #

FOBS LEARNED.

TO EXIT PROGRAMMING MODE:

1. Press the ACC button (ignition switch).

TO MATCH A NEW TRANSMITTER TO YOUR VEHICLE WHEN YOU

DO NOT HAVE A RECOGNIZED TRANSMITTER:

1. The vehicle must be off.

2. Place the new, unrecognized transmitter in the glove box transmit-

ter pocket with the buttons facing towards the passenger’s side.

3. Go to the rear of the vehicle and insert the vehicle key into the

key cylinder located above the license plate. See “Hatch” in your

Owner’s Manual for more information on the key cylinder.

KEY FOB PROGRAMMING INSTRUCTIONS -

10372541, 10372542

FOR AUTOMOBILES:

• 2005-2007 Corvette

REQUIRED TOOLS:

• None

INSTRUCTION SHEET

4. Open the trunk.

5. Turn the key ﬁve times within ﬁve seconds.

6. The Driver Information Center (DIC) message will display OFF-

ACCESSORY TO LEARN.

7. Press the ACC button (ignition switch).

8. The DIC will read WAIT 10 MINUTES and will count down to zero,

one minute at a time.

9. The DIC will display OFF-ACCESSORY TO LEARN again.

10. Press the ACC button (ignition switch).

11. The DIC will read WAIT 10 MINUTES and will count down to zero,

one minute at a time.

12. The DIC will display OFF-ACCESSORY TO LEARN again.

13. Press the ACC button (ignition switch).

14. The DIC will read WAIT 10 MINUTES and will count down to zero,

one minute at a time.

15. A beep will sound and the DIC will read READY FOR FOB #1. At

this time, all previously known transmitters have been erased.

16. Once the transmitter is recognized and programmed, a beep will

sound and the DIC will display READY FOR FOB #2.

NOTE: If you have additional transmitters to program, take transmitter

1 out of the transmitter pocket and place transmitter 2 in the pocket.

This can be done repeatedly until up to four transmitters have be

programmed. The DIC will then display MAX # FOBS LEARNED and

will exit the programming mode.

TO EXIT PROGRAMMING MODE:

1. Press the ACC button (ignition switch).

ACDelco 10372541 User manual

Brand: ACDelco

Model: 10372541

Type: User manual

This manual is also suitable for

10372542

Download PDF

report

ACDelco 10372541 User manual

This manual is also suitable for

ACDelco 10372541 User manual

Related papers

Other documents