LIT-PaTH Outdoor LED Wall Lantern as Porch Light, 11W (100W Equivalent), 1000 Lumen, Aluminum Housing Plus Glass, Matte White Finish, Outdoor Rated, ETL and ES Qualified Installation guide

Model: Outdoor LED Wall Lantern as Porch Light, 11W (100W Equivalent), 1000 Lumen, Aluminum Housing Plus Glass, Matte White Finish, Outdoor Rated, ETL and ES Qualified

11W

>50000 Hours

120VAC

90mA

1000lm 1000lm

100

1.TURN POWER OFF Turn power o at circuit breaker or remove the correct fuse.

6.TURN POWER ON Turn power on at circuit breaker or replace the fuse.

2.PREPARE CROSS BAR Screw in the Fixture Mounting Screws (5) into the Cross Bar (2)

3.MOUNT CROSS BAR Mount Cross Bar (2) to Outlet Box (1) by inserting the two Mounting Screws (3) through

slots in Cross Bar.

4.CONNECT FIXTURE Hold the xture to make the back plate(4) close to the outlet box(1). Using wire nuts

provided connect bare copper wire from xture to green or bare copper ground (house)

wire. If outlet box is grounded you may fasten xture ground wire directly to outlet box.

Connect white xture wire(s) to neutral supply wire. Connect black xture wire(s) to power

supply wire.

5.MOUNT BACK PLATE Insert Fixture Mounting Screws (5) through holes on the back plate and secure to cross bar

by tightening Fixture Mounting Nuts (6). NOTE: Hand tighten Mounting Nuts. Do not use

any tools as over tightening may occur causing damage to back plate.

205

320

153

LIT-

Please completely comply with this instructions and notes,to ensure that the product is operated in a safe

condition.Thanks for your trust to buy our products. Hopefully you are satisfied with our products.If you are not

satisfied with our products or if you have any questions,please kindly ontact us by email [email protected].

LT-WL00630K, LT-WL00650K

LIT-

Model: Outdoor LED Wall Lantern as Porch Light, 11W (100W Equivalent), 1000 Lumen, Aluminum Housing Plus Glass, Matte White Finish, Outdoor Rated, ETL and ES Qualified