Intermec EasyCoder PC4 Supplementary Manual

Category
Camera cases
Type
Supplementary Manual
The PC4 carrying case is a rugged accessory that provides a
convenient way to transport and store the PC4 printer. The
carrying case also provides easy access to the printer buttons,
connectors, and batteries to allow you to print labels while the
printer is in the carrying case.
PC4 Carrying Case Features
Use the carrying case to carry the printer, an extra battery, and
any accessories you may have purchased. The carrying case has a
battery pocket, an accessory pocket, and a sturdy shoulder strap
to make it easy for you to store and transport everything you
need for your printer.
Accessory
pocket
Shoulder
strap
Battery
pocket
Note: You must turn off the battery pack on the PC4 while
you are transporting it in the carrying case.
PC4 Carrying Case Instructions
6001 36th Avenue West
Everett, WA 98203
U.S.A.
www.intermec.com
© 2004 Intermec Technologies Corp.
All Rights Reserved
PC4 Carrying Case Instructions
*074762-001*
P/N 074762-001
Printing With the PC4 While Using the Carrying Case
The PC4 carrying case has two zippers that you must unzip to be able
to print labels without removing the printer from the carrying case.
Unzipping the case allows the sides to fold down and provides
ventilation for the printer battery pack.
Note: Do not operate the printer or charge the battery
unless the carrying case is completely open.
To prepare the carrying case for printing
1 Unzip both of the carrying case zippers completely.
2 Roll the printer bag flap toward the inside of the carrying case and
secure with the Velcro strap.
Velcro strap
Printer bag
flap
PC4 Carrying Case: The carrying case is shown without the printer inserted so that
you can see the printer bag flap.
  • Page 1 1
  • Page 2 2

Intermec EasyCoder PC4 Supplementary Manual

Category
Camera cases
Type
Supplementary Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI