Bosch GSR 14,4 VE-2-LI Owner's manual

Category
Cordless combi drills
Type
Owner's manual
Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
Germany
www.bosch-pt.com
2 609 140 752 (2010.08) O / 224 UNI
GSR | GSB Professional
14,4 VE-2-LI | 18 VE-2-LI
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimat
pl Instrukcja oryginalna
cs Původní návod k používání
sk Pôvodný návod na použitie
hu Eredeti használati utasítás
ru Оригинальное руководст-
во по эксплуатации
uk Оригінальна інструкція з
експлуатації
ro Instrucţiuni originale
bg Оригинална инструкция
sr Originalno uputstvo za rad
sl Izvirna navodila
hr Originalne upute za rad
et Algupärane kasutusjuhend
lv Instrukcijas oriģinālvalodā
lt Originali instrukcija
ar
fa
ΕΎϤϴϠόΗϞϴϐθΘϟ΍ΔϴϠλϷ΍
̶Ϡλ΍ έΎ̯ ίήσ ̵ΎϤϨϫ΍έ
OBJ_DOKU-21914-002.fm Page 1 Thursday, January 20, 2011 3:20 PM
2 |
2 609 140 752 | (27.7.10) Bosch Power Tools
Deutsch. . . . . . . . . . . . . . . . . . . . . . . . . . . . Seite 3
English. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 11
Français. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 18
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . Página 26
Português . . . . . . . . . . . . . . . . . . . . . . . . . Página 34
Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . Pagina 41
Nederlands . . . . . . . . . . . . . . . . . . . . . . . . Pagina 49
Dansk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Side 57
Svenska. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sida 64
Norsk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Side 70
Suomi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sivu 76
Ελληνικά . . . . . . . . . . . . . . . . . . . . . . . . . . . Σελίδα 83
Türkçe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sayfa 91
Polski . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strona 98
Česky. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strana 106
Slovensky . . . . . . . . . . . . . . . . . . . . . . . . . Strana 113
Magyar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oldal 121
Русский. . . . . . . . . . . . . . . . . . . . . . . . . Страница 129
Українська . . . . . . . . . . . . . . . . . . . . . . Сторінка 137
Română . . . . . . . . . . . . . . . . . . . . . . . . . . . Pagina 145
Български . . . . . . . . . . . . . . . . . . . . . . . Страница 152
Srpski . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strana 160
Slovensko . . . . . . . . . . . . . . . . . . . . . . . . . . Stran 167
Hrvatski . . . . . . . . . . . . . . . . . . . . . . . . . . Stranica 174
Eesti . . . . . . . . . . . . . . . . . . . . . . . . . . . Lehekülg 181
Latviešu. . . . . . . . . . . . . . . . . . . . . . . . . . Lappuse 188
Lietuviškai . . . . . . . . . . . . . . . . . . . . . . . . Puslapis 196
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
v
v
v
v

cc
cc
ΔΤϔλ
vÝ—U
ϪΤϔλ
OBJ_BUCH-1237-001.book Page 2 Tuesday, July 27, 2010 4:18 PM
English | 11
Bosch Power Tools 2 609 140 752 | (27.7.10)
en
General Power Tool Safety
Warnings
Read all safety warnings and all
instructions. Failure to follow
the warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
f Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
f Do not operate power tools in explosive at-
mospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools
create sparks which may ignite the dust or
fumes.
f Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
Electrical safety
f Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of elec-
tric shock.
f Avoid body contact with earthed or ground-
ed surfaces, such as pipes, radiators, rang-
es and refrigerators. There is an increased
risk of electric shock if your body is earthed
or grounded.
f Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
f Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the pow-
er tool. Keep cord away from heat, oil,
sharp edges and moving parts. Damaged or
entangled cords increase the risk of electric
shock.
f When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduc-
es the risk of electric shock.
f If operating a power tool in a damp location
is unavoidable, use a residual current de-
vice (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
Personal safety
f Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alco-
hol or medication. A moment of inattention
while operating power tools may result in se-
rious personal injury.
f Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for ap-
propriate conditions will reduce personal in-
juries.
f Prevent unintentional starting. Ensure the
switch is in the off-position before connect-
ing to power source and/or battery pack,
picking up or carrying the tool. Carrying
power tools with your finger on the switch or
energising power tools that have the switch
on invites accidents.
f Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power
tool may result in personal injury.
f Do not overreach. Keep proper footing and
balance at all times. This enables better con-
trol of the power tool in unexpected situa-
tions.
f Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught
in moving parts.
WARNING
OBJ_BUCH-1237-001.book Page 11 Tuesday, July 27, 2010 4:18 PM
12 | English
2 609 140 752 | (27.7.10) Bosch Power Tools
f If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
Power tool use and care
f Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed.
f Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is dan-
gerous and must be repaired.
f Disconnect the plug from the power source
and/or the battery pack from the power
tool before making any adjustments, chang-
ing accessories, or storing power tools.
Such preventive safety measures reduce the
risk of starting the power tool accidentally.
f Store idle power tools out of the reach of
children and do not allow persons unfamil-
iar with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
f Maintain power tools. Check for misalign-
ment or binding of moving parts, breakage
of parts and any other condition that may
affect the power tool’s operation. If dam-
aged, have the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
f Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
f Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working con-
ditions and the work to be performed. Use
of the power tool for operations different
from those intended could result in a hazard-
ous situation.
Battery tool use and care
f Recharge only with the charger specified by
the manufacturer. A charger that is suitable
for one type of battery pack may create a risk
of fire when used with another battery pack.
f Use power tools only with specifically des-
ignated battery packs. Use of any other bat-
tery packs may create a risk of injury and fire.
f When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a con-
nection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
f Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with wa-
ter. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Service
f Have your power tool serviced by a quali-
fied repair person using only identical re-
placement parts. This will ensure that the
safety of the power tool is maintained.
Safety Warnings for Drills and
Screwdriver
GSB 14,4 VE-2-LI/GSB 18 VE-2-LI
f Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
GSR 18 VE-2-LI/GSB 18 VE-2-LI
f Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal in-
jury.
f When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
OBJ_BUCH-1237-001.book Page 12 Tuesday, July 27, 2010 4:18 PM
English | 13
Bosch Power Tools 2 609 140 752 | (27.7.10)
GSR 14,4 VE-2-LI/GSR 18 VE-2-LI/
GSB 14,4 VE-2-LI/GSB 18 VE-2-LI
f Hold power tool by insulated gripping sur-
faces, when performing an operation where
the cutting accessory or fastener may con-
tact hidden wiring. Cutting accessory and
fasteners contacting a “live” wire may make
exposed metal parts of the power tool “live”
and could give the operator an electric
shock.
f Use appropriate detectors to determine if
utility lines are hidden in the work area or
call the local utility company for assistance.
Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can
lead to explosion. Penetrating a water line
causes property damage or may cause an
electric shock.
f Switch off the power tool immediately
when the tool insert jams. Be prepared for
high reaction torque that can cause kick-
back. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
f Hold the machine with a firm grip. High re-
action torque can briefly occur while driving
in and loosening screws.
f Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
f Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
f Do not open the battery. Danger of short-
circuiting.
Protect the battery against heat, e. g.,
against continuous intense sunlight,
fire, water, and moisture. Danger of
explosion.
f In case of damage and improper use of the
battery, vapours may be emitted. Provide
for fresh air and seek medical help in case
of complaints. The vapours can irritate the
respiratory system.
f Use the battery only in conjunction with
your Bosch power tool. This measure alone
protects the battery against dangerous over-
load.
f Use only original Bosch batteries with the
voltage listed on the nameplate of your
power tool. When using other batteries, e. g.
imitations, reconditioned batteries or other
brands, there is danger of injury as well as
property damage through exploding batter-
ies.
Additional Safety and Working
Instructions
f Dusts from materials such as lead-contain-
ing coatings, some wood types, minerals
and metal can be harmful to one’s health
and cause allergic reactions, lead to respi-
ratory infections and/or cancer. Materials
containing asbestos may only be worked by
specialists.
Provide for good ventilation of the work-
ing place.
It is recommended to wear a P2 filter-
class respirator.
Observe the relevant regulations in your
country for the materials to be worked.
f Before any work on the machine (e. g.,
maintenance, tool change, etc.) as well as
during transport and storage, set the rota-
tional direction switch to the centre posi-
tion. Unintentional actuation of the On/Off
switch can lead to injuries.
f The battery is supplied partially charged. To
ensure full battery capacity, completely
charge the battery in the battery charger
before using for the first time.
f The battery is equipped with a NTC temper-
ature control which allows charging only
within a temperature range of between
0 °C and 45 °C. A long battery service life
is achieved in this manner.
f Read the operating instructions of the bat-
tery charger.
OBJ_BUCH-1237-001.book Page 13 Tuesday, July 27, 2010 4:18 PM
14 | English
2 609 140 752 | (27.7.10) Bosch Power Tools
f Apply the power tool to the screw only
when it is switched off. Rotating tool inserts
can slip off.
f Adjust the gear switch only when the ma-
chine is at a complete stop.
f Always push the gear selector and turn the
operating mode selector switch through to
the stop. Otherwise, the machine can be-
come damaged.
f In case of excessive loading, e. g., pro-
longed blocking of the application tool, the
electronics switch off the power tool. After
switching on again, the power tool can be
used again as intended for. In case of con-
tinued overload, the power tool will switch
off again in order to prevent damage to the
motor.
Symbols
The following symbols are important for reading and understanding the operating instructions.
Please take note of the symbols and their meaning. The correct interpretation of the symbols will
help you to use the machine in a better and safer manner.
Symbol Meaning Symbol Meaning
GSR 14,4 VE-2-LI/
GSR 18 VE-2-LI/
GSB 14,4 VE-2-LI/
GSB 18 VE-2-LI:
Cordless screwdriver/
Combination cordless drill
Grey-marked area: Handle
(insulated gripping surface)
Article number
Read all safety warnings and all
instructions
Before any work on the machine
itself, remove the battery
Movement direction Reaction direction
Drilling and screwdriving Impact drilling
Low speed High speed
Switching On Switching Off
Right/left rotation Prohibited action
Battery Capacity
U Rated voltage n
S
Impact rate
n
0
1 No-load speed (1. gear) n
0
2 No-load speed (2. gear)
M Maximum torque according to
ISO 5393
Brickwork
OBJ_BUCH-1237-001.book Page 14 Tuesday, July 27, 2010 4:18 PM
English | 15
Bosch Power Tools 2 609 140 752 | (27.7.10)
Delivery Scope
Cordless screwdriver/Combination cordless
drill.
Battery, application tools and other accessories
shown or described are not part of the standard
delivery scope.
A complete overview of accessories can be
found in our accessories program.
Intended Use
The machine is intended for driving in and loos-
ening screws as well as for drilling in wood, met-
al, ceramics and plastic. GSB machines are ad-
ditionally intended for impact drilling in bricks,
brickwork and masonry.
Technical Data
The technical data of the machine are listed in
the Table on page 216217.
Please observe the article number on the type
plate of your machine. The trade names of the
individual machines may vary.
Declaration of Conformity
We declare under our sole responsibility that
the product described under “Technical Data” is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 2006/42/EC.
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
18.05.2010
Noise/Vibration Information
The measured values of the machine are listed
in the table on page 216217.
Noise and vibrational values (vector sum of
three directions) determined according to
EN 60745.
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Metal Wood
Ø Drilling diameter, max. Ø Max. screw dia.
Chuck clamping range Weight according to
EPTA-Procedure 01/2003
L
wA
Sound power level L
pA
Sound pressure level
K Uncertainty a
h
Vibrational emission value
Symbol Meaning Symbol Meaning
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
OBJ_BUCH-1237-001.book Page 15 Tuesday, July 27, 2010 4:18 PM
16 | English
2 609 140 752 | (27.7.10) Bosch Power Tools
Mounting and Operation
Maintenance and Cleaning
f For safe and proper working, always keep
the machine and ventilation slots clean.
Clean the application tool, the tool holder, the
power tool’s ventilations slots, and the battery’s
ventilation slots each time after using.
After-sales Service and
Customer Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
sories.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Action Figure Page
Removing the Battery 1 218
Inserting the Battery 2 218
Checking the battery charge condition 3 218
Changing the position of the auxiliary handle 4 219
Mounting application tools 5 219
Reversing the Rotational Direction 6 220
Setting the Torque 7 220
Selecting the drilling position 8 221
Setting the Operating Mode 9 221
Gear Selection, Mechanical 10 221
Switching On and Off 11 222
Selecting accessories 223
OBJ_BUCH-1237-001.book Page 16 Tuesday, July 27, 2010 4:18 PM
English | 17
Bosch Power Tools 2 609 140 752 | (27.7.10)
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: +27 (011) 6 51 96 00
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: +27 (011) 4 93 93 75
Fax: +27 (011) 4 93 01 26
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: +27 (031) 7 01 21 20
Fax: +27 (031) 7 01 24 46
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: +27 (021) 5 51 25 77
Fax: +27 (021) 5 51 32 23
Bosch Headquarters
Midrand, Gauteng
Tel.: +27 (011) 6 51 96 00
Fax: +27 (011) 6 51 98 80
E-Mail: rbsa-hq.[email protected]osch.com
Transport
Dispatch batteries only when the housing is un-
damaged. Tape or mask off open contacts and
pack up the battery in such a manner that it can-
not move around in the packaging.
When dispatching lithium-ion batteries, compul-
sory labeling may be required. Please observe
the respective national regulations.
Disposal
The machine, rechargeable batteries, accesso-
ries and packaging should be sorted for environ-
mental-friendly recycling.
Do not dispose of power tools and batteries/re-
chargeable batteries into household waste!
Only for EC countries:
According to the European Guide-
line 2002/96/EC for Waste Electri-
cal and Electronic Equipment and
its implementation into national
right, power tools that are no
longer usable must be collected
separately and disposed of in an environmental-
ly correct manner.
Only for EC countries:
Defective or dead out battery packs/batteries
must be recycled according the guideline
2006/66/EC.
Batteries no longer suitable for use can be
directly returned at:
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
Subject to change without notice.
OBJ_BUCH-1237-001.book Page 17 Tuesday, July 27, 2010 4:18 PM
216 |
2 609 140 752 | (27.7.10) Bosch Power Tools
GSR 14,4 VE-2-LI
Professional
GSR 14,4 VE-2-LI
Professional
GSR 18 VE-2-LI
Professional
GSR 18 VE-2-LI
Professional
3 601 H65 4.. 3 601 H65 4.. 3 601 H65 3.. 3 601 H65 3..
U
V= 14,4 14,4 18 18
Ah 1,5 3,0 1,5 3,0
n
0
1 min
-1
0 380 0 380 0 380 0 380
n
0
2 min
-1
0 1600 0 1600 0 1600 0 1600
n
S
min
-1
––
M
Nm 75 75 80 80
M
Nm 26 34 33 43
Ø
mm ––
Ø
mm 13 13 13 13
Ø
mm 45 45 50 50
Ø
mm 10 10 12 12
mm 1,5 13 1,5 13 1,5 13 1,5 13
kg 1,8 2,0 1,9 2,1
L
wA
dB(A) ––
L
pA
dB(A) 75 75 75 75
K
dB 3 333
a
h
m/s
2
––
a
h
m/s
2
<2,5 <2,5 <2,5 <2,5
a
h
m/s
2
<2,5 <2,5 <2,5 <2,5
K
m/s
2
1,5 1,5 1,5 1,5
OBJ_BUCH-1237-001.book Page 216 Tuesday, July 27, 2010 4:18 PM
| 217
Bosch Power Tools 2 609 140 752 | (27.7.10)
GSB 14,4 VE-2-LI
Professional
GSB 14,4 VE-2-LI
Professional
GSB 18 VE-2-LI
Professional
GSB 18 VE-2-LI
Professional
3 601 H62 4.. 3 601 H62 4.. 3 601 H62 3.. 3 601 H62 3..
U
V= 14,4 14,4 18 18
Ah 1,5 3,0 1,5 3,0
n
0
1 min
-1
0 420 0 420 0 420 0 420
n
0
2 min
-1
0 1800 0 1800 0 1800 0 1800
n
S
min
-1
0 27000 0 27000 0 27000 0 27000
M
Nm 80 80 85 85
M
Nm 23 31 30 38
Ø
mm 14 14 16 16
Ø
mm 13 13 13 13
Ø
mm 40 40 45 45
Ø
mm 10 10 10 10
mm 1,5 13 1,5 13 1,5 13 1,5 13
kg 1,9 2,1 2,0 2,2
L
wA
dB(A) 102 102 102 102
L
pA
dB(A) 91 91 91 91
K
dB 3 333
a
h
m/s
2
16 16 16 16
a
h
m/s
2
<2,5 <2,5 <2,5 <2,5
a
h
m/s
2
<2,5 <2,5 <2,5 <2,5
K
m/s
2
1,5 1,5 1,5 1,5
OBJ_BUCH-1237-001.book Page 217 Tuesday, July 27, 2010 4:18 PM
2 609 140 752 | (27.7.10) Bosch Power Tools
218 |
100 %
0 %
100 %
0 %
2
3
1
1
2
OBJ_BUCH-1237-001.book Page 218 Tuesday, July 27, 2010 4:18 PM
| 219
Bosch Power Tools 2 609 140 752 | (27.7.10)
5
4
3
1
1
3
2
GSR 18 VE-2-LI
GSB 18 VE-2-LI
2
OBJ_BUCH-1237-001.book Page 219 Tuesday, July 27, 2010 4:18 PM
2 609 140 752 | (27.7.10) Bosch Power Tools
220 |
Min.
Max.
7
6
OBJ_BUCH-1237-001.book Page 220 Tuesday, July 27, 2010 4:18 PM
| 221
Bosch Power Tools 2 609 140 752 | (27.7.10)
9
10
8
GSB 14,4 VE-2-LI
GSB 18 VE-2-LI
OBJ_BUCH-1237-001.book Page 221 Tuesday, July 27, 2010 4:18 PM
2 609 140 752 | (29.7.10) Bosch Power Tools
222 |
11
OBJ_DOKU-21918-001.fm Page 222 Thursday, July 29, 2010 1:56 PM
| 223
Bosch Power Tools 2 609 140 752 | (27.7.10)
AL 1820 CV
(14,4 / 18 V)
2 607 225 424 (EU)
AL 1860 CV
(14,4 / 18 V)
2 607 225 322 (EU)
2 607 225 324 (UK)
14,4 V (Li-Ion)
2 607 336 224 (3,0 Ah)
2 607 336 078 (2,6 Ah)
2 607 336 552 (1,5 Ah)
2 607 336 150 (1,3 Ah)
18 V (Li-Ion)
2 607 336 236 (3,0 Ah)
2 607 336 092 (2,6 Ah)
2 607 336 560 (1,5Ah)
2 607 336 170 (1,3 Ah)
2 608 438 692
(L-BOXX 136)
2 608 438 029
2 602 025 169
OBJ_BUCH-1237-001.book Page 223 Tuesday, July 27, 2010 4:18 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223

Bosch GSR 14,4 VE-2-LI Owner's manual

Category
Cordless combi drills
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI