Hampton Bay 19061-001 Installation guide

Brand
Hampton Bay
Model
19061-001
Type
Installation guide

Hampton Bay 19061-001 is a 4-Light Vanity Lamp. This energy-efficient vanity lamp is the perfect complement to any traditional bathroom. With its brushed nickel finish and clear glass shades, this fixture will add a touch of elegance to any room. This product is easy to install and use, making it a great choice for anyone looking for a stylish way to add light to their home.

Hampton Bay 19061-001 is a 4-Light Vanity Lamp. This energy-efficient vanity lamp is the perfect complement to any traditional bathroom. With its brushed nickel finish and clear glass shades, this fixture will add a touch of elegance to any room. This product is easy to install and use, making it a great choice for anyone looking for a stylish way to add light to their home.

USE AND CARE GUIDE
Item # 205086292
Model #19061-001
4-LIGHT VANITY LAMP
THANK YOU
to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Hampton Bay!
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-855-HD-HAMPTON
HAMPTONBAY.COM
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this vanity lamp. We strive
2
Table of Contents
Safety Information
WARNING: RISK OF ELECTRIC SHOCK. Before starting the
installation disconnect the power by turning off the circuit
breaker or by removing the appropriate fuse at the fuse
prevent electrical shock.
Warranty
ONE YEAR MANUFACTURER WARRANTY
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
WARNING:
Inspect the wire insulation for any cuts,
abrasions or exposed copper that may have resulted
during shipping. If there is a defect in the wire, do not
continue the assembly. Please call our
Customer Service Team at 1-855-HD-HAMPTON.
box. Turning the power off at the switch is not sufficient to
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Hardware Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Package Contents
. . . . . . . . . . . . . . . . . . . . . . . . . . . 4. . . . . .
Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 . .
WHAT IS COVERED
The manufacturer warrants this unit to be free from defects in materials and workmanship for a period of one (1) year from date of
purchase.
This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is
found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the
neglect, or mishandling.
This warranty shall not apply to any product that is found to have been improperly installed, setup, or used in any
way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failuree of the product as a result of
an accident, misuse, abuse, negligence, alteration, faulty installation,
or any other failure not relating to faulty material or workmanship.
wear and tear.
WHAT IS NOT COVERED
or incidental loss or damage, including but not limited to any labor/ expense costs involved in the replacement or repair of said product.
manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations,
This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal
The manufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness for a particular purpose,
other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential
3
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Installation
TOOLS REQUIRED
Ladder Safety goggles
Phillips
screwdriver
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Read all instructions before assembling.
To avoid damaging this product, assemble it on a soft, non-abrasive, surface such as a carpet or cardboard.
Keep the receipt and these instructions for proof of purchase.
Electrical
tape
□
□
□
AA
ytitnauQnoitpircseDtraP
AA
2
Junction Box Screw
BB
Wire Connector
3
BB
CC
DD
2
Anchor
Anchor Screw
2
CC
DD
4
Pre-Installation (continued)
PACKAGE CONTENTS
E
Shade
4
Mounting Bracket (preassembled to Fixture Assembly (B))
A
1
Canopy Nut (preassembled to Fixture Assembly (B))
Fixture AssemblyB
2
C
D
1
4
ytitnauQnoitpircseDtraP
Socket Ring (preassembled to Fixture Assembly (B))
A
B
C
D
E
5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
2
Making the electrical connections
3
Installing the fixture
Connect the white, black and ground wire from the xture
to the white, black and ground wire of the supply circuit using
the wire connectors (BB) provided.
If the supply circuit does not have a bare ground wire then the
ground wire from the xture pre-assembly must be connected
to the green hex screw located on the mounting braket (A).
Allow the mounting screws on the mounting bracket (A) to
extend through two canopy holes on the xture assembly (B).
Secure the xture assembly (B) to the mounting bracket (A)
by threading the two canopy nuts (C) to the ends of the two
mounting screws.
Make the connections to a 120V AC 60Hz circuit.
NOTE:
1
Temporarily secure the mounting bracket (A) to the junction
box (not included) with the two junction box screws (AA), making
sure the large opening on the keyhole slot is pointing down, and
that the mounting bracket (A) is level, then mark the anchor (CC)
locations on the wall through the small opening on the keyhole
slots.
Preparing the unit for installation
Carefully unpack and lay all parts on a clean, level surface.
NOTE: The pre-assembled mounting screws on mounting
bracket (A) should protrude out from the junction box.
WARNING: Before starting the installation of this fixture
or removal of a previous fixture, disconnect the power by
turning off the circuit breaker or by removing the fuse at
the fuse box.
Remove the mounting bracket (A) and drill two holes making them
slightly smaller than the anchors (CC) provided. Insert the anchors
(CC) and tap into the wall until secure.
Install the mounting bracket (A) to the junction box with two junction
box screws (AA), thread the anchor screws (DD) provided into the
anchors (CC).
AA
A
DD
CC
B
C
A
BB
A
Care and Cleaning
Clean the unit with a soft, dry cloth.
Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Problem
Possible Causes
The bulb will not light.
The bulb is burned out.
There is an exposed wire.
Replace the light bulb.
The power is off.
Ensure the power supply is on.
The circuit breaker is off.
Ensure the circuit breaker is in the ON position.
The fuse blows or circuit breaker
blows when the light is turned on.
Discontinue use of the lamp.
Contact a qualified electrician or call the
Customer Service Team at 1-855-HD-HAMPTON.
Solutions
6
4
Installing the shade and light bulb
Installation (continued)
D
E
B
Remove the pre-assembled socket rings (E) from the xture
assembly (B). Install the shades (D) to the xture assembly (B),
securing with the socket rings (E)
Install four 60-watt maximum type A bulbs or four CFL
equivalent bulbs (not included).
Retain this manual for future use.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Hampton Bay 19061-001 Installation guide

Brand
Hampton Bay
Model
19061-001
Type
Installation guide

Hampton Bay 19061-001 is a 4-Light Vanity Lamp. This energy-efficient vanity lamp is the perfect complement to any traditional bathroom. With its brushed nickel finish and clear glass shades, this fixture will add a touch of elegance to any room. This product is easy to install and use, making it a great choice for anyone looking for a stylish way to add light to their home.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents