Notice for Windows XP x64 Users
This notice sheet applies only to users of Windows XP x64 Edition. It does not apply to other versions of
Windows XP, such as XP Home Edition or XP Professional Edition.
If you are running Windows XP x64 Edition, some features of the software included with your scanner may
not be functional. The following are some known limitations:
■ ScanSoft
®
PaperPort
®
9.0
During installation, you see an error message that a printer driver cannot be added. Other features of the
software may, however, be functional. ScanSoft (Nuance
®
) does not support this version of PaperPort
under Windows XP x64 Edition. Please check at www.scansoft.com for software updates.
■ Adobe
®
Acrobat
®
7.0
This version of Acrobat is not supported under Windows XP x64 Edition. Please visit www.adobe.com
for details.
■ Epson
®
Network Image Express Card software
The installer on the CD for your network card is not recognized under Windows XP x64 Edition.
To install the software, follow this procedure:
1. Open
My Computer.
2. Right-click the
EPSON CD-ROM icon and select Explore.
3. Open the
ENWINA folder.
4. Open the
Disk1 folder.
5. Double-click
SETUP.EXE to install the EpsonNet software.
Note:
You must turn off the Windows XP firewall (and any other firewalls you may be using) before running the
WinAssist software to configure your network card.
Check for updated software at http://support.epson.com.
®
Epson is a registered trademark and Exceed Your Vision is a trademark of Seiko Epson Corporation.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective
owners. Epson disclaims any and all rights in those marks.
© 2006 Epson America, Inc. 5/06 CPD-21821
Printed in USA