Short Form Specifications
Exterior Body: The refrigerated lower section has a 0.62”
(1.58 cm) thick double pane insulated Low-E/Argon filled LOF
tempered glass front and top. The interior sides are mirrored
stainless steel with ABS plastic backing. Exterior sides are
18-gauge stainless steel and are foamed with 1.50” (3.81
cm) polyurethane insulation. The front nosing is 18-gauge
stainless steel.
The dry upper section has front and sides of 0.25” (.635 cm)
thick safety glass. The top of the dry section is an 18-gauge
stainless steel shelf. Two 16-gauge support posts run the full
length of the unit at rear. The base is 14-gauge galvanized
steel covered with a 20-gauge stainless steel exterior. Base
is mounted on recessed adjustable feet for leveling. All of the
shelves in the refrigerated and dry section have 14-gauge
stainless steel brackets and 0.25” (.635cm) thick safety glass
shelves.
Doors: The refrigerated lower section has (2) hinged, double
pane, insulated tempered glass Pike
®
doors at rear with
mirror finish. The refrigerated doors are self-closing and are
mounted in a thermo-plastic frame. The dry upper section has
(2) hinged 0.25” (.635cm) thick mirrored safety glass Pike
®
doors. All doors are removable for cleaning.
Interior Cabinet: The refrigerated lower section has
20-gauge mirrored stainless steel interior sides with ABS
plastic backing. This section has (1) glass shelf mounted on
14-gauge stainless steel brackets and (2) 72 watt fluorescent
lights (120v-60hz-1ph). The dry upper section has (2) glass
shelves mounted on 14-gauge stainless steel brackets and
(3) 72 watt fluorescent lights (120v-60hz-1ph) depending on
the model. On/off switches for the refrigeration and lights are
located in the base of the unit. Self-contained unit has an 8 ft.
cord with 5-20P NEMA plug.
Refrigeration: All Models: Temperature is regulated by a
pressure control. The unit is designed to maintain 33°-41°F
at ambient room temperatures of 75°F and realitive humidity
of 55%. The refrigerant used is R-404A.
Self-Contained Model: the condensing unit is bottom-mount-
ed, with air intake from the front and exhaust from the back.
Optional laminate for the sides and frontlower section.
Dual View™ Dry Display Case
536-SR68/536-SRR68
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
Self Contained
536-SR68 Model
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, Michigan 48858, (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.