Bowflex M3 MAX Owner's manual

Category
Fitness, gymnastics & weight training
Type
Owner's manual

This manual is also suitable for

ASSEMBLY / OWNER’S MANUAL
OWNER’S / ASSEMBLY MANUAL
M3
OWNER’S / ASSEMBLY MANUAL
ASSEMBLY / OWNER’S MANUAL
M3
M3
OWNER’S / ASSEMBLY MANUALOWNER’S / ASSEMBLY MANUALOWNER’S / ASSEMBLY MANUAL
OWNER’S / ASSEMBLY MANUALOWNER’S / ASSEMBLY MANUALOWNER’S / ASSEMBLY MANUAL
Manual en Español
Latino Americano:
www.support.nautilus.com
Assembly / Owner’s Manual
2
Important Safety Instructions 3
Safety Warning Labels / Serial Number 5
Specications 6
BeforeAssembly 6
Parts 7
Hardware 8
Tools 8
Assembly 9
Moving the Machine 19
Leveling the Machine 19
Features 20
Console Features 21
Resistance Level Shifter 22
Fitness Basics 25
Operations 31
Mounting / Dismounting 31
Power Up / Idle Mode 32
Manual (Quick Start) Program 33
MAX Workout Program 33
Paused / Results Mode 34
EditaUserProle 35
Customize MAX Program 35
ConsoleSetupMode 36
Maintenance 37
Maintenance Parts 38
Troubleshooting 40
Body Weight Loss Guide 42
Warranty 51
To validate warranty support, keep the original proof of purchase and record the following information:
Serial Number __________________________
Date of Purchase ____________________
Toregisteryourproductwarranty,goto:www.bowex.com/registerorcall1(800)605–3369.
Ifyouhavequestionsorproblemswithyourproduct,pleasecall1(800)605–3369.
Nautilus,Inc.,(800)605-3369,www.NautilusInc.com-CustomerService:NorthAmerica(800)605-3369,[email protected]|outsideU.S.www.nautilusinternational.com|Printed
inChina|©2016Nautilus,Inc.|®indicatestrademarksregisteredintheUnitedStates.Thesemarksmayberegisteredinothernationsorotherwiseprotectedbycommonlaw.
Bowex,theBlogo,MaxTrainer,SelectTech,Nautilus,Schwinn,andUniversalaretrademarksownedbyorlicensedtoNautilus,Inc.Polar,OwnCode,MyFitnessPal,andNutThins
are trademarks of their respective owners.
Table of Contents / Registration
Assembly / Owner’s Manual
3
When using an electrical appliance, basic precautions should always be followed, including the following:
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Obey the following warnings:
Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions.
Carefully read and understand the Assembly instructions. Read and understand the complete Manual. Keep the Manual
for future reference.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug this machine from the
electrical outlet immediately after using and before cleaning.
To decrease the risk of burns, electric shock, or injury to persons, read and understand the complete Owners Manual.
Failure to follow these guidelines can cause a serious or possibly fatal electrical shock or other serious injury.
Keep bystanders and children away from the product you are assembling at all times.
Do not connect power supply to the machine until instructed to do so.
The machine should never be left unattended when plugged in. Unplug from outlet when not in use and before cleaning, maintaining or repairing
the machine.
• Beforeeachuse,examinethemachinefordamagetopowercord,loosepartsorsignsofwear.Donotuseiffoundinthiscondition.Contact
Nautilus Customer Service for repair information.
Not intended for use by persons with medical conditions where those conditions may impact the safe operation of the machine or pose a risk of
injury to the user.
Do not drop or put objects into any opening of the machine.
Never operate this machine with the air openings blocked. Keep the air openings free of lint, hair and the like.
Do not assemble this machine outdoors or in a wet or moist location.
• Makesureassemblyisdoneinanappropriateworkspaceawayfromfoottrafcandexposuretobystanders.
Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving these parts. Do
not do steps that involve heavy lifting or awkward movements on your own.
Set up this machine on a solid, level, horizontal surface.
Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and will void the warranty.
If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine replacement parts can
cause a risk to users, keep the machine from operating correctly and void the warranty.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Manual.
• ReadandunderstandthecompleteManualsuppliedwiththismachinebeforerstuse.KeeptheManualforfuturereference.
Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.
SAVE THESE INSTRUCTIONS.
Important Safety Instructions
Assembly / Owner’s Manual
4
Before using this equipment, obey the following warnings:
Read and understand the complete Manual. Keep the Manual for future reference.
Read and understand all warnings on this machine. If at any time the Warning stickers become loose, unreadable or dislodged,
contact Nautilus Customer Service for replacement stickers.
To reduce the risk of electrical shock or usage of the equipment, always unplug the power cord from the wall outlet and
the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power cord in a secure
location.
Children must not be let on or near to this machine. Moving parts and other features of the machine can be dangerous to children.
Not intended for use by anyone under 14 years of age.
• Consultaphysicianbeforeyoustartanexerciseprogramoranewhealthanddietplan.Stopexercisingifyoufeelpainortightnessinyour
chest, become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated or measured
bythemachine’scomputerforreferencepurposesonly.Theheartratedisplayedontheconsoleisanapproximationandshouldbeusedfor
reference only.
• Beforeeachuse,examinethismachineforloosepartsorsignsofwear.Donotuseiffoundinthiscondition.MonitorthePedalsandCrank
Arms closely. Contact Nautilus Customer Service for repair information.
• Maximumuserweightlimit:300lbs.(136kg).Donotuseifyouareoverthisweight.
This machine is for home use only.
• Donotwearlooseclothingorjewelry.Thismachinecontainsmovingparts.Donotputngersorotherobjectsintomovingpartsoftheexercise
equipment.
Set up and operate this machine on a solid, level, horizontal surface.
Make the Pedals stable before you step on them. Use caution when you step on and off the machine.
Do not operate this machine outdoors or in moist or wet locations.
• Keepatleast24”(0.6m)oneachsideofthemachineclear.Thisistherecommendedsafedistanceforaccessandpassagearoundand
emergency dismounts from the machine. Keep third parties out of this space when machine is in use.
• Donotoverexertyourselfduringexercise.Operatethemachineinthemannerdescribedinthismanual.
Perform all regular and periodic maintenance procedures recommended in the Owner’s Manual.
Keep the Pedals clean and dry.
• Exerciseonthismachinerequirescoordinationandbalance.Besuretoanticipatethatchangesinspeedandresistancelevelcanoccurduring
workouts, and be attentive in order to avoid loss of balance and possible injury.
This machine cannot stop the Pedals or Upper Handlebars independently of the Resistance Fan. Reduce the pace to slow the Resistance Fan,
Upper Handlebars and Pedals to a stop. Do not dismount the machine until the Pedals and Upper Handlebars have come to a complete stop.
Do not drop or put objects into any opening of the machine.
Prior to use read and understand the Owner’s Manual. The appliance is not to be used by persons with functional limitations and impairments,
reducedphysical,sensoryormentalcapabilities,orlackofexperienceandknowledge.
Important Safety Instructions
Assembly / Owner’s Manual
5
FCC Compliance
Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users
authority to operate the equipment.
The machine and power supply comply with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This machine and power supply have been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Safety Warning Labels and Serial Number
8011889_B
Injury or death is possible if caution is not used while
using this machine.
Keep children and pets away.
Read and follow all warnings on this machine.
Refer to the Owner's Manual for additional warnings and
safety information.
The heart rate displayed is an approximation and should
be used for reference only.
Not intended for use by anyone under 14 years of age.
The maximum user weight for this machine is 300 lbs
(136 kg.).
This machine is for home use only.
Consult a physician prior to using any exercise equipment.
Une imprudence lors de l'utilisation de cet appareil
pourrait être dangereuse, voire mortelle.
Éloignez les enfants et les animaux de compagnie de
l'appareil.
Lisez et assimilez tous les avertissements apposés sur
cet appareil.
Consultez le Guide du propriétaire pour prendre
connaissance des consignes de sécurité et
avertissements supplémentaires.
La fréquence cardiaque affichée est approximative et
doit être utilisée uniquement à titre indicatif.
Non destiné à des personnes âgées de moins de 14 ans.
Le poids maximum de l'utilisateur pour cette machine est
136 kg (300 lbs).
Cet appareil est à usage domestique uniquement.
Consulter un médecin avant d'utiliser tout équipement
d'exercice physique.
ADVERTISSEMENT
ProductSpecication
Label
Serial Number Label
Assembly / Owner’s Manual
6
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a
workoutareaofaminimum74”(188cm)x97”(246.4cm).Besurethattheworkoutspaceyouareutilizinghasadequateheightclearance,taking
intoconsiderationtheheightoftheuserandthemaximumpedalheightofthetnessmachine.
Basic Assembly Tips
Follow these basic points when you assemble your machine:
Read and understand the “Important Safety Instructions” before assembly.
Collect all the pieces necessary for each assembly step.
Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless
instructed otherwise.
When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
The assembly requires 2 people.
Machine Mat
TheBowex™MaxTrainer™MachineMatisanoptionalaccessorythathelpskeepyourworkoutareaclearandaddsalayerofprotectiontoyour
oor.Therubbermachinematprovidesanon-slip,rubbersurfacewhichlimitsstaticdischargeandreducesthepossibilityofdisplayorrunninger-
rors.Ifpossible,putyourBowex™MaxTrainer™MachineMatinyourselectedworkoutareabeforeyoubeginassembly.
Toordertheoptionalmachinemat,goto:www.bowex.com,orcall1(800)605–3369.
Maximum User Weight: 300lbs.(136kg)
Maximum Pedal Height: 19.1 inches ( 48.5 cm)
Power Requirements:
Operational Voltage: Operational Voltage 9VDC
Operating Current: 1500 mA
Regulatory Approvals:
ACPowerAdapter: ULlisted,CSAcertied(orequivalent),Rated120V60Hz
Input, 9VDC, 1500mA Output. Class 2 or LPS.
64.7”
(164.3 cm)
49”
(124.5 cm)
26”
(66 cm)
Specifications / Before Assembly
Assembly / Owner’s Manual
7
A decal has been applied to all right (“ R ”) and left (“ L ”) parts to assist with assembly.
Item Qty Description Item Qty Description
1 1 Frame 10 2 Pedal
2 1 Shroud, Rear 11 1 Rail Assembly
3 1 AC Adapter 12 1 Stabilizer Assembly
4 1 Hardware Card 13 1 Static Handlebar Assembly
5 1 Upper Handlebar, Right 14 2 Cap
6 1 Upper Handlebar, Left 15 1 Static Handlebar Grip
7 2 Leg 16 1 Static Handlebar Cap
8 2 Foot Pad 17 1 Heart Rate Chest Strap
9 2 Foot Pad Insert 18 1 Manual Kit
5
11
7
12
9
6
1
7
3
2
8
9
8
10
10
13
14
17
15
16
4
18
5
11
7
12
9
6
1
7
3
2
8
9
8
10
10
13
14
17
15
16
4
18
Parts
Assembly / Owner’s Manual
8
Tools
Included Not Included
(recommended)
#2
5 mm
6mm
8 mm
13 mm
Item Qty Description Item Qty Description
A 8 SocketHeadHexScrew,M6x1.0x8 I 4 SocketHeadHexScrew,M10x1.5x25
B 4 SocketHeadHexScrew,M8x1.25x55 J 4 Washer,FlatM10x23
C 12 Washer,FlatM8x18 K 2 Washer,FlatM8x24
D 6 SocketHeadHexScrew,M8x1.25x20 L 4 Washer,FlatM6x13
E 1 PanPhillipsScrew,M5x0.8x20 M 10 LockWasher,M6
F 2 Cap N 6 Lock Washer, M8
G 4 Lock Nut, M8 O 2 WaveWasher,17.2x22
H 10 SocketHeadHexScrew,M6x1.0x20
Note: Select pieces of Hardware have been provided as spares on the Hardware Card. Be aware that there may be remaining Hardware
after the proper assembly of your machine.
(recommended)
Hardware / Tools
A B C D E F
G H
I J K L M N O
Assembly / Owner’s Manual
9
1. Attach Rail Assembly to Frame and then Release the Frame from the Shipping Plate
Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving these
parts. Do not do steps that involve heavy lifting or awkward movements on your own.
NOTICE: Hand tighten hardware.
13mm
X2
C
11
X4
N
D
1
13mm
X2
C
11
X4
N
D
1
Assembly
Assembly / Owner’s Manual
10
2. Carefully Lift the Frame Assembly from the Shipping Plate and Attach to the Stabilizer Assembly
Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving these
parts. Do not do steps that involve heavy lifting or awkward movements on your own. Lift the Frame Assembly from the exterior of
the pivot assembly as indicated below.
NOTICE: Once all hardware has been hand tightened, fully tighten ALL hardware from previous steps.
I
J
X4
12
Assembly / Owner’s Manual
11
3. Cut the Shipping Zip-Ties and Attach the Rear Shroud and Caps to the Frame Assembly
NOTICE: Place the inside hook of the Rear Shroud on the Frame Assembly and then pivot it up into place.
14
14
2
#2
X1
E
Assembly / Owner’s Manual
12
4. Attach Legs to Frame Assembly
Be aware that the Legs are connected and when either of these parts move the other does as well.
K
X2
N
D
F
6mm
7
7
X2
O
Assembly / Owner’s Manual
13
5. Attach Pedals to Frame Assembly
In order to avoid possible serious injury, when inserting the tube ends into the Leg Assemblies be careful to avoid fingers or hands
being caught or pinched.
B
X4
6mm
C
G
X4
C
10
10
13mm
Assembly / Owner’s Manual
14
X2
X8
5mm
8
9
8
A
6. Connect the Foot Pads and then the Foot Pad Inserts
Assembly / Owner’s Manual
15
7. Attach the Upper Handlebars to Frame Assembly
Be aware that the Pedals and the Upper Handlebars are connected and when either of these parts move the other does as well.
Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving these
parts. Do not do steps that involve heavy lifting or awkward movements on your own.
NOTICE: Be sure to attach the Upper Handlebars so they can be correctly grasped by a User when on the machine.
5
6
H
M
X6
5mm
Assembly / Owner’s Manual
16
8. Connect the Static Handlebar Assembly to the Frame Assembly
NOTICE: Do not crimp the Console Cable.
5mm
X4
H
M
L
13
Assembly / Owner’s Manual
17
9. Attach the Shifter Assembly to the Static Handlebar and Attach the Grip
NOTICE: Do not crimp the Cable. Hardware is pre-installed and not on Hardware Card (*). Be sure the settings on
the Shifter Assembly are visible to a User before fully tightening the hardware.
Note: A small application of soapy water can be used to ease the Static Handleber Grip onto the Handelbar.
*
X1
#2
15
16
Assembly / Owner’s Manual
18
3
10. Connect the AC Adapter to the Frame Assembly
11. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Besuretorecordtheserialnumberintheeldprovidedatthefrontofthismanual.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owners
Manual.
Assembly / Owner’s Manual
19
Moving the Machine
The machine may be moved by one or more persons depending on their
physical abilities and capacities. Make sure that you and others are all
physically t and able to move the machine safely.
1. Grasp the inner, unmoving part of the Pivot Assembly to carefully tilt the machine
toward you onto the transport rollers.
Be aware of the Handlebars and the weight of the machine before tilting the
machine.
2. Push the machine into position.
3. Carefully lower the machine into position.
NOTICE: Be careful when you move the machine, abrupt motions can affect the
computer operation.
Leveling the Machine
ThemachineneedstobeleveledifyourworkoutareaisunevenoriftheRailAssemblyisslightlyofftheoor.Toadjust:
1. Place the machine in your workout area.
2. Loosenthelockingnutsandadjustthelevelersuntiltheyareevenlybalancedincontactwiththeoor.
Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or damage to the machine
can occur.
3. Tighten the locking nuts.
Make sure the machine is level and stable before you exercise.
Adjustments
Assembly / Owner’s Manual
20
A Console Buttons H Leveler
B Resistance Level Shifter I Rail Assembly
C Console Display J Roller
D Water Bottle Holder K Pedal
E Resistance Fan L Media Tray
F Power Connector M Static Handlebar
G Transport Roller N Upper Handlebar
Use the values calculated or measured by the machine’s computer for reference purposes only. The heart rate
displayed is an approximation and should be used for reference only. Over exercising may result in serious injury or
death. If you feel faint stop exercising immediately.
F
E
G
H
H
I
J
K
B
C
A
M
N
L
D
Features
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

Bowflex M3 MAX Owner's manual

Category
Fitness, gymnastics & weight training
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI