dbx 140 User manual

Type
User manual

dbx 140 is a two-channel compressor/expander providing a minimum of 30 dB broadband audio noise reduction with a 10 dB increase in a system headroom. It is a simultaneous encode/decode broadcast noise reduction system that can be used for recording live announce or studio productions on cartridges, eliminating the tape hiss which usually accompanies the recording process. It can also be used for transfer of program material to cartridge from other recorded sources, preventing any additional noise build up beyond that contained in the original material.

dbx 140 is a two-channel compressor/expander providing a minimum of 30 dB broadband audio noise reduction with a 10 dB increase in a system headroom. It is a simultaneous encode/decode broadcast noise reduction system that can be used for recording live announce or studio productions on cartridges, eliminating the tape hiss which usually accompanies the recording process. It can also be used for transfer of program material to cartridge from other recorded sources, preventing any additional noise build up beyond that contained in the original material.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37

dbx 140 User manual

Type
User manual

dbx 140 is a two-channel compressor/expander providing a minimum of 30 dB broadband audio noise reduction with a 10 dB increase in a system headroom. It is a simultaneous encode/decode broadcast noise reduction system that can be used for recording live announce or studio productions on cartridges, eliminating the tape hiss which usually accompanies the recording process. It can also be used for transfer of program material to cartridge from other recorded sources, preventing any additional noise build up beyond that contained in the original material.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI