HPI Racing Trophy 3.5 Buggy User manual

Type
User manual

This manual is also suitable for

High Speed Needle
1
Step 2
2
Step 3
3
Step 4
4
Turn the high speed needle clockwise in 1/8 turn
increments to lean out the fuel mixture for increased
top speed and throttle performance. Drive the car to
notice changes in speed and throttle response.
ContinuTeuning:
Continue leaning the carb in Clockwise 1/8
turn increments.
(Maximum of 2 1/2 turns from flush.)
TPOT S uning:
Stop tuning and go to if your
engine shows any of the follow signs.
(Engine is running too lean.)
At full throttle, these is no smoke from the
exaust.
The engine hesitates or bogs.
Reduced top speed and loss of power.
aehrevOting
Temperatures above 250°C (120°F)
at the glow plug.
If your engine is running lean, turn the needle
counter clockwise 1/4 turn to richen the fuel
mixture and repeat
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65

HPI Racing Trophy 3.5 Buggy User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI