ICP PIO-DA8U Quick start guide

ICP
Brand
ICP
Model
PIO-DA8U
Type
Quick start guide

This manual is also suitable for

ICP PIO-DA8U-S is an 8-channel digital and analog I/O card designed for use with Windows 98/NT/2000 and XP/2003/Vista 32-bit versions. The card features 8 digital input/output channels, 8 analog input channels, and 2 analog output channels. The digital I/O channels can be used for a variety of applications, including controlling relays, sensors, and other digital devices. The analog input channels can be used to measure voltages and currents, while the analog output channels can be used to generate voltages and currents.

The ICP PIO-DA8U-S is a versatile I/O card that can be used for a wide range of applications. Some of the possible use cases for the card include:

ICP PIO-DA8U-S is an 8-channel digital and analog I/O card designed for use with Windows 98/NT/2000 and XP/2003/Vista 32-bit versions. The card features 8 digital input/output channels, 8 analog input channels, and 2 analog output channels. The digital I/O channels can be used for a variety of applications, including controlling relays, sensors, and other digital devices. The analog input channels can be used to measure voltages and currents, while the analog output channels can be used to generate voltages and currents.

The ICP PIO-DA8U-S is a versatile I/O card that can be used for a wide range of applications. Some of the possible use cases for the card include:

- 1 -
Language English
Version V1.1
Update Mar.2009
………………………………………………
What’s in your package?
¾ One PIO-DA4U/8U/16U series card
¾ One companion PCI CD (V3.6 or later)
¾ One Quick Start Guide (This document)
………………………………………………
Installing Windows Driver
Follow these steps:
1.
Set up the Windows driver.
The driver is location at:
CD:\NAPDOS\PCI\PIO-DA\DLL_OCX\Driver\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pio-da/dll_ocx/
driver/
1
2
PIO-DA4U/8U/16U
- 2 -
2. Click the button to start the installation.
3. Click the button to install the driver into the
default folder.
4. Click the button to continue the installation.
5. Select the “NO, I will restart my computer later”
and then click the
button.
………………………………………………
Installing Hardware on PC
Follow these steps:
1. Shut down and power off your computer
2. Remove the cover from the computer
3. Select an unused PCI slot
4. Carefully insert your I/O card into the PCI slot
5. Replace the PC cover
6. Power on the computer
After powering-on the computer, please finished the
Plug&Play steps according to the prompt message.
3
The Windows driver only supports Windows 98/NT/2000
and XP/2003/vista 32-bit versions.
- 3 -
………………………………………………
Pin Assignments
¾ CN1, CN2 Pin Assignments. (Digital output/input)
¾ CN3 Pin Assignments. (Analog Output)
4
Pin Name Pin Name
1 Volta
g
e Out
p
ut 0 20 Current Out
p
ut 0
2 Volta
g
e Out
p
ut 1 21 Current Out
p
ut 1
3 Volta
g
e Out
p
ut 2 22 Current Out
p
ut 2
4 Volta
g
e Out
p
ut 3 23 Current Out
p
ut 3
5
A
nalo
g
g
round 24
A
nalo
g
g
round
6 Volta
e Out
ut 4 25 Current Out
p
ut 4
7 Volta
e Out
ut 5 26 Current Out
p
ut 5
8 Volta
g
e Out
p
ut 6 27 Current Out
p
ut 6
9 Volta
g
e Out
p
ut 7 28 Current Out
p
ut 7
10
A
nalo
g
g
round 29
A
nalo
g
g
round
11 Volta
g
e Out
p
ut 8 30 Current Out
p
ut 8
12 Volta
g
e Out
p
ut 9 31 Current Out
p
ut 9
13 Volta
g
e Out
p
ut 10 32 Current Out
p
ut 10
14 Volta
g
e Out
p
ut 11 33 Current Out
p
ut 11
15
A
nalo
g
g
round 34 Current Out
p
ut 12
16 Volta
g
e Out
p
ut 12 35 Current Out
p
ut 13
17 Volta
g
e Out
p
ut 13 36 Current Out
p
ut 14
18 Volta
e Out
ut 14 37 Current Out
p
ut 15
19 Volta
g
e Out
p
ut 15
Pin Name Pin Name
1 Volta
g
e Out
p
ut 0 20 Current Out
p
ut 0
2 Volta
g
e Out
p
ut 1 21 Current Out
p
ut 1
3 Volta
g
e Out
p
ut 2 22 Current Out
p
ut 2
4 Volta
g
e Out
p
ut 3 23 Current Out
p
ut 3
5
A
nalo
g
g
round 24
N/A
6 Volta
e Out
ut 4 25 Current Out
p
ut 4
7 Volta
e Out
ut 5 26 Current Out
p
ut 5
8 Volta
g
e Out
p
ut 6 27 Current Out
p
ut 6
9 Volta
g
e Out
p
ut 7 28 Current Out
p
ut 7
10
A
nalo
g
g
round 29
N/A
11 Volta
g
e Out
p
ut 8 30 Current Out
p
ut 8
12 Volta
g
e Out
p
ut 9 31 Current Out
p
ut 9
13 Volta
g
e Out
p
ut 10 32 Current Out
p
ut 10
14 Volta
g
e Out
p
ut 11 33 Current Out
p
ut 11
15
A
nalo
g
g
round 34 Current Out
p
ut 12
16 Volta
g
e Out
p
ut 12 35 Current Out
p
ut 13
17 Volta
g
e Out
p
ut 13 36 Current Out
p
ut 14
18 Volta
g
e Out
p
ut 14 37 Current Out
p
ut 15
19 Volta
g
e Out
p
ut 15
PIO-DA16/DA8/DA4
PIO-DA16U/DA8U/DA4U
※
Note: Pin 24 and Pin 29 are not Analog Ground on PIO-DA Universal board.
Wiring of applications transferred from PIO-DA to PIO-DA Universal board need be rearranged.
- 4 -
………………………………………………
Self Test
1. Use the CA-2002(Optional) to connect CN1 to CN2.
2.
Execute the PIO-DA sample program.
The sample program is contained in a zip file which
is located at:
CD:\NAPDOS\PCI\PIO-DA\DLL_OCX\Demo
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pio-da/d
ll_ocx/demo/
5
CN3
CN1
CN2
- 5 -
3. Check the board number of the PIO-DA, and test the
DIO functions.
4.
Get DIO function test result.
3. Click the test
button to run
the DIO test.
2. Select the
board number
for the PIO-DA.
It starts from 0.
1. One PIO-DA
has been
successfully
installed in PC.
4. Click the
channel 0 、2、
4、6 in the DO.
5. DI show to
channel 0、2、
4、6 for high
state. (Red light)
Complete
- 6 -
………………………………………………
Additional Information
9 PIO-DA4U/8U/16U Series Card Product page:
http://www.icpdas.com/products/DAQ/pc_based/pio_da16-8-4.htm
9 CA-2002(Optional) page:
http://www.icpdas.com/products/Accessories/cable/cable_selection.htm
9 Documentation:
CD:\NAPDOS\PCI\PIO-DA\Manual
http://ftp.icpdas.com.tw/pub/cd/iocard/pci/napdos/pci/pio-da/manual/
9 Software:
CD:\NAPDOS\PCI\PIO-DA
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pio-da/
The ICP DAS Web Site
http://www.icpdas.com
Contact Us
[email protected]
Copyright ©2009 by ICP DAS Co., Ltd. All rights are reserved
6
Technical support
Supplies and ordering information
Methods of enhancing your device
FAQ
Application story
  • Page 1 1
  • Page 2 2

ICP PIO-DA8U Quick start guide

ICP
Brand
ICP
Model
PIO-DA8U
Type
Quick start guide
This manual is also suitable for

ICP PIO-DA8U-S is an 8-channel digital and analog I/O card designed for use with Windows 98/NT/2000 and XP/2003/Vista 32-bit versions. The card features 8 digital input/output channels, 8 analog input channels, and 2 analog output channels. The digital I/O channels can be used for a variety of applications, including controlling relays, sensors, and other digital devices. The analog input channels can be used to measure voltages and currents, while the analog output channels can be used to generate voltages and currents.

The ICP PIO-DA8U-S is a versatile I/O card that can be used for a wide range of applications. Some of the possible use cases for the card include:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents