Mirage Activa
™
LT
NASAL MASK
Fitting Guide
• Turn on the airflow device.
5
• Turn the MicroFit dial to position
24, so that the forehead support
is fully extended.
• Disconnect the lower headgear clip,
hold the mask over the nose and pull
the headgear over the head.
• Reconnect the lower headgear clip
ensuring it clicks into place.
3
1
2
4
6
• While lying down, adjust the dial for
comfort and seal.
• If the mask is fitted correctly,
the cushion should be smooth
and fully inflated.
•
If fitted incorrectly, the cushion
will be creased and underinflated.
✓
✘
✓
✘
✓
✘
✓
✘
For details, refer to the
Mirage Activa LT Nasal Mask User Guide.
• Connect one end of the air tubing to
the swivel and the other end to the
airflow device.
• Keep the bottom straps loose to
allow room for the cushion to inflate.
Use two fingers as a guide.
ResMed Corp Poway, CA, USA +1 858 746 2400 or 1 800 424 0737 (toll free), ResMed Ltd Bella Vista, NSW, Australia +61 (2) 8884 1000 or 1 800 658 189 (toll free). Offices in Austria, Belgium, Brazil, China, Finland,
France, Germany, Greece, Hong Kong, India, Ireland, Italy, Japan, Malaysia, Mexico, Netherlands, New Zealand, Norway, Portugal, Singapore, South Africa, Spain, Sweden, Switzerland, United Kingdom (see website
for details). Activa, ActiveCell, and Mirage are trademarks of ResMed Ltd. and registered in U.S. Patent and Trademark Office. ©2009 ResMed. 1013306/2 09 01
Global leaders in sleep and respiratory medicine www.resmed.com
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
ResMed Other Mirage masks User guide
-
ResMed Dehumidifier S8 User manual
-
-
ResMed Mirage Liberty User manual
-
-
-
-
ResMed S User manual
-
ResMed VPAP IV User manual
-