Base fitting and removal.
Place the TV face
down on a suitable
surface with the
base mounting
facing towards you
(Fig 1).
Place the base plate onto the TV. Press the base until the “Tabs” click into
place
Fit the four screws (3mm x 8mm) provided into the holes as shown in Fig 2.
Tighten using a No 0 Posi screwdriver.
If wall mounting the TV see page 20 in the Main Instruction book.
Fig 1
Fig2
Model : ALEDVD23611E
Cabinet Front
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI