Moog Mother-32 Rack Kit Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Moog Mother-32 Rack Kit Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
RACK ASSEMBLY INSTRUCTIONS
Remove the top 2 screws from each wood side of your Mother-32.
Note: The lower 2 screws on each wood side should not be removed.
With each unit positioned on its side, place one rack side-piece in position and loosely reinstall the side screws with the included washers.
Repeat step (b) for the opposite side.
Install the rubber feet to the bottom of the crossbar with the included screws.
Loosely install the crossbar between the rack side-pieces with the included screws.
Tighten all screws to stabilize the system.
d
e
f
3
WHATS INCLUDED
RACK SIDES
CROSSBAR
x2
WHAT’S NEEDED
PHILLIPS HEAD SCREWDRIVER
x1 x1
PAN HEAD SCREWS
x8
2
x2
RACK INSTRUCTION SHEET MOTHER
-
32 (OR EMPTY CASE)
x1
WASHERS
x8
RUBBER FEET
x2
d
e
f
RACK ASSEMBLY INSTRUCTIONS
Remove the top 2 screws from each wood side of your Mother-32.
Note: The lower 2 screws on each wood side should not be removed.
With each unit positioned on its side, place one rack side-piece in position and
loosely reinstall the side screws with the included washers.
Repeat step (b) for the opposite side.
Install the rubber feet to the bottom of
the crossbar. with the included screws.
Loosely install the crossbar between the rack
side-pieces with the included screws.
Tighten all screws to stabilize the system.
d
e
f
3
WHATS INCLUDED
RACK SIDES
CROSSBAR
x2
WHAT’S NEEDED
PHILLIPS HEAD SCREWDRIVER
x1 x1
PAN HEAD SCREWS
x8
2
x3
RACK INSTRUCTION SHEET MOTHER
-
32 (OR EMPTY CASE)
x1
WASHERS
x12
RUBBER FEET
x2
d
e
f
3
-
/