Eizo MX210 Owner's manual

English Deutsch Français

中文

•El Manual de instalación en español se puede descargar del sitio: http://www.eizo.com

•Il Manuale di installazione in Italiano è disponibile per il download nel sito Web all’indirizzo:

http://www.eizo.com

•Installationshandboken på svenska går att ladda ned från vår webbplats: http://www.eizo.com

•Μπορείτε να κάνετε λήψη του Εγχειριδίου εγκατάστασης στα Ελληνικά από τον ιστότοπό μας:

http://www.eizo.com

•Руководство по установке на русском языке доступно для загрузки с нашего сайта по адресу:

http://www.eizo.com

•中文的設定操作手冊可以從我們的網站下載：http://www.eizo.com

•Instalační příručka v češtině je dostupná ke stažení z našich stránek: http://www.eizo.com

•En installationsvejledning på dansk kan hentes fra vores websted: http://www.eizo.com

•Asennusopas suomeksi on ladattavissa osoitteesta: http://www.eizo.com

•한국어로 된 설치 설명서를 당사 웹 사이트에서 다운로드할 수 있습니다: http://www.eizo.com

•De installatiehandleiding in het Nederlands kan worden gedownload van onze site:

http://www.eizo.com

•Installasjonsveiledning på norsk kan lastes ned fra vårt område: http://www.eizo.com

•Podręcznik instalacji w języku polskim można pobrać z naszej witryny internetowej

:

http://www.eizo.com

•O Manual de instalação (em português) está disponível para download no nosso website:

http://www.eizo.com

•Türkçe Kurulum Kılavuzu sitemizden indirilebilir: http://www.eizo.com

•http://www.eizo.com:

Instructions for Use: ■Setup Manual

Important: Please read this Setup Manual and the User’s Manual stored on the

CDROM carefully to familiarize yourself with safe and effective usage.

Please retain this manual for future reference.

Gebrauchsanweisung: ■Installationshandbuch

Wichtig: Lesen Sie dieses Installationshandbuch und das Benutzerhandbuch (auf

der CD-ROM) aufmerksam durch, um sich mit der sicheren und efzienten

Bedienung vertraut zu machen. Bewahren Sie dieses Handbuch zum

späteren Nachschlagen auf.

Notice d’instruction: ■Manuel d’installation

Important : Veuillez lire attentivement ce manuel d’installation, ainsi que le manuel

d’utilisation inclus sur le CD-ROM, an de vous familiariser avec ce produit

et de l’utiliser efcacement et en toute sécurité. Veuillez conserver ce

manuel pour référence ultérieure.

使用说明书: ■设定手册

重要事项：请仔细阅读储存在光盘片中的设定手册和用户手册，以便熟悉安全有效使用

本显示器的信息。请保留本手册、以便今后参考。



Compatible Resolutions/Frequencies

Kompatible Auﬂösungen/Bildwiederholfrequenzen

Résolutions/Fréquences compatibles

兼容的分辨率／频率

The monitor supports the following resolutions

Der Monitor unterstützt die nachfolgend aufgeführten Auﬂösungen

Le moniteur est compatible avec les résolutions suivantes.

本显示器支持下列分辨率。

Analog Input

Resolution Display Mode Frequency Dot Clock

640 × 400 NEC PC-9801 56 Hz

162 MHz

(Max.)

640 × 400 NEC PC-9821 70 Hz

640 × 480 Apple Macintosh 67 Hz

640 × 480 VGA, VESA ~ 75 Hz

720 × 400 VGA TEXT 70 Hz

800 × 600 VESA ~ 75 Hz

832 × 624 Apple Macintosh 75 Hz

1024 × 768 VESA ~ 75 Hz

1152 × 864 VESA 75 Hz

1152 × 870 Apple Macintosh 75 Hz

1280 × 960 VESA 60 Hz

1280 × 960 Apple Macintosh 75 Hz

1280 × 1024 VESA ~ 75 Hz

*

1600 × 1200 VESA 60 Hz

Digital Input

Resolution Display Mode Frequency Dot Clock

640 × 480 VGA 60 Hz

162 MHz

(Max.)

720 × 400 VGA TEXT 70 Hz

720 × 480 VESA Safe Mode 60 Hz

800 × 600 VESA 60 Hz

1024 × 768 VESA 60 Hz

1280 × 960 VESA 60 Hz

1280 × 1024 VESA 60 Hz

*

1600 × 1200 VESA 60 Hz

*

Recommended resolution (Set this resolution)

*

Empfohlene Auösung (diese Auösung festlegen)

*

Résolution recommandée (Réglez votre appareil sur cette résolution)

*

推荐的分辨率

( 设定此分辨率 )

Symbol / Symbol /

Symbole /

符号

This symbol indicates / Bedeutung des Symbols /

Signication /

此符号表示

Power Button / Press to turn the monitor’s power on or off.

Netzschalter / Drücken, um den Monitor ein- und auszuschalten.

Bouton d’alimentation / Appuyez pour allumer ou éteindre le moniteur.

电源按钮

/按此键打开 /关闭显示器的主电源。

Alternating current

Wechselstrom

Courant alternatif

交流电

Alerting electrical hazard

Warnung vor elektrischem Schlag

Avertissement de danger électrique

警告存在触电危险

Caution

Refer to SAFETY SYMBOLS section in this manual.

Vorsicht

Siehe in diesem Handbuch unter SICHERHEITSSYMBOLE.

Attention

Reportez-vous à la section SYMBOLES DE SECURITE de ce manuel.

注意

请参阅本手册中的安全符号章节。

SAFETY SYMBOLS

This manual uses the safety symbols below. They denote critical information. Please read them carefully.

WARNING

Failure to abide by the information in a WARNING

may result in serious injury and can be life

threatening.

CAUTION

Failure to abide by the information in a CAUTION

may result in moderate injury and/or property or

product damage.

Indicates a prohibited action.

Indicates a mandatory action that must be followed. For example, the symbol illustrates the notiﬁcation of

general prohibition such as “Grounding the unit”.

PRECAUTIONS

WARNING

If the unit begins to emit smoke, smells like

something is burning, or makes strange noises,

disconnect all power connections immediately

and contact your dealer for advice.

Attempting to use a malfunctioning unit may result

in ﬁre, electric shock, or equipment damage.

Use the enclosed power cord and connect to

the standard power outlet of your country.

Be sure to remain within the rated voltage of the

power cord. Not doing so may result in ﬁre or

electric shock.

"Power Supply: 100-120/200-240 Vac 50/60Hz"

Keep small objects or liquids away from the

unit.

Small objects accidentally falling through the

ventilation slots into the cabinet or spillage into

the cabinet may result in ﬁre, electric shock, or

equipment damage. If an object or liquid falls/spills

into the cabinet, unplug the unit immediately. Have

the unit checked by a qualiﬁed service engineer

before using it again.

Use the unit in an appropriate location.

Not doing so may result in ﬁre, electric shock, or

equipment damage.

• Do not place outdoors.

• Do not place in the transportation system (ship,

aircraft, trains, automobiles, etc.).

• Do not place in a dusty or humid environment.

• Do not place in a location where water is splashed

on the screen (bathroom, kitchen, etc.)

• Do not place in a location where the steam comes

directly on the screen.

• Do not place near heat generating devices or a

humidiﬁer

.

• Do not place in a location where the product is

subject to direct sunlight.

• Do not place in an inﬂammable gas environment.

The equipment must be connected to a

grounded main outlet.

Not doing so may result in ﬁre or electric shock.

Fluorescent backlight lamps contain mercury

(the products that have LED backlight lamps

contain no mercury), dispose according to

local, state or federal laws.

Exposure to elemental mercury can result in effects

on the nervous system, including tremor, memory

loss, and headache.

CAUTION

Do not block the ventilation slots on the

cabinet.

• Do not place any objects on the ventilation slots.

• Do not install the unit in a closed space.

• Do not use the unit laid down or upside down.

Blocking the ventilation slots prevents proper

airﬂow and may result in ﬁre, electric shock, or

equipment damage.

Use an easily accessible power outlet.

This will ensure that you can disconnect the power

quickly in case of a problem.

1

English

Package Contents

Check that all the following items are included in the packaging box. If any items are missing or damaged,

contact your local dealer.

NOTE

Please keep the packaging box and materials for future movement or transport of the monitor.

• Monitor

• Power cord

• Digital signal cable : FD-C39

• EIZO USB cable : MD-C93

• EIZO LCD Utility Disk (CD-ROM)

- RadiCS LE (for Windows)

- ScreenManager Pro for Medical (for Windows)

- User’s Manual

• Setup Man

ual (this manual)

• Recycling Information

Controls and Functions

Adjustment menu

(ScreenManager

® *

)

Hold the projection

to open/close the

holder.

Power connector

1 Sensor

Detects ambient brightness. BrightRegulator function.

Refer to the User’s Manual on the CD-ROM.

2 Input Signal Selection

button

Switches input signals for display when two PCs are connected to the

monitor.

3 Mode button

Displays the CAL Switch menu (page 5).

4 Auto button

Performs the function to adjust the screen automatically. (analog input only)

5 Enter button

Displays the Adjustment menu, determines an item on the menu screen, and

saves values adjusted.

6 Control buttons (Left,

Down, Up, Right)

Displays the Adjustment menu, determines an item on the menu screen, and

saves values adjusted.

7 Power button

Turns the power on or off.

8 Power indicator

Indicates monitor’s operation status.

Blue: Operating Orange: Power saving Off: Power off

9 Security lock slot

Complies with Kensington’s MicroSaver security system.

10 Height adjustable stand

Used to adjust the height and angle of the monitor screen.

11 Input signal connectors

Left: DVI-I connector/Right: D-sub mini 15-pin connector.

12 USB port (Up)

Connects the USB cable to use the software that needs USB connection, or

to use USB Hub function.

13 Cable holder

Covers the monitor cables.

14 USB port (Down)

Connects the monitor to a USB peripheral device.

*

ScreenManager

®

is an EIZO’s nickname of the Adjustment menu. (For how to use ScreenManager, refer to the User’s Manual on the CD-ROM.)

2

Connecting Cables

Note

•

Check that the monitor and the PC are powered off.

•

When replacing the current monitor with a MX210 monitor, be sure to change the PC settings

for resolution and vertical frequency to those which are available for the MX210 monitor referring to

the resolution table (back of cover page) before connecting the PC.

Tips

•

When connecting two PCs to the monitor, refer to the User’ s Manual on the CD-ROM.

1

Connect the monitor to the PC with a signal cable that matches the connectors.

After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.

Digital Input

Connectors on the PC cable Connectors on the monitor

Signal cable FD-C39

Analog Input

Connectors on the PC cable Connectors on the monitor

Signal cable MD-C87 (option)

2

Connect the USB cable when using RadiCS LE or ScreenManager Pro for

Medical.

3

Plug the power cord into a power outlet and the power connector on the monitor.

4

Press to turn on the monitor.

The monitor’s Power indicator lights up blue.

5

Turn on the PC.

The screen image appears.

If an image does not appear, refer to "No-Picture Problem" for additional advice.

6

When using analog input signals, perform the Auto Adjustment function. (Refer

to "Performing Auto Adjustment function" below.)

The Auto Adjustment function is not necessary when digital signals are input because images are

displayed correctly based on the preset data of the monitor.

Connecting to the Monitor

Connecting to a Computer

Digital/Analog signal cable

USB cable

Power cord

3

English

Note

•

Turn off the monitor and PC after using them.

•

For the maximum power saving, it is recommended that the Power button be turned off. Unplugging

the power cord completely shuts off power supply to the monitor.

Adjusting the Screen Height and Angle

Hold left and right edge of the monitor with both hands, and adjust the screen height, tilt and swivel of

the screen to the best condition for working.

Note

•

Be sure that the cables are correctly connected.

Installing RadiCS LE

The quality control software "RadiCS LE" (for Windows) is included with MX series monitors.

To calibrate the monitor and manage the calibration history, install RadiCS LE with reference to the

RadiCS LE User's Manual on the CD-ROM.

Note

•

Connect the monitor to the PC with a USB cable when using RadiCS LE.

Tips

•

To perform advanced quality control that conforms to medical standards, use the optional monitor

quality control software kit "RadiCS UX1".

Performing Auto Adjustment Function (Analog input only)

When analog signals are input, the Auto Adjustment function enables the automatic adjustment of

clock, phase, screen position, and resolution.

For details of the Auto Adjustment function, refer to the User’s Manual on the CD-ROM.

1

Press .

A message window appears.

2

Press again while the message is displayed.

The Auto Adjustment function is activated and clock, phase, and screen position are adjusted

automatically.

Note

•

The Auto Adjustment function works correctly when an image is fully displayed over the display area

of a Macintosh or Windows PC screen. It does not work properly when an image is displayed only on

a part of the screen (DOS prompt window, for example) or when a black background (wallpaper, etc.)

is in use.

•

The Auto Adjustment function may not work properly with some graphics boards.

Message window

4

Selecting Display Mode

CAL Switch function allows you to select the best display mode easily according to monitor’s

application.

For details of CAL Switch function, refer to the User’s Manual on the CD-ROM.

CAL Switch Mode

DICOM-CL

Available for setting tailored to X-ray ﬁlm color (clear base).

Text

Suitable for displaying texts for word processing or spreadsheets.

Custom

Available for making desired setting.

CAL

Used for monitor calibration.

1

Press .

The CAL Switch menu appears.

2

Press again while the CAL Switch menu is

displayed.

Each time the button is pressed, the mode on the screen

switches. (Refer to the CAL Switch Mode table.)

3

Press at the desired mode.

The selected mode is set.

The basic settings and adjustments are completed. For advanced settings/adjustments,

refer to the User’s Manual on the CD-ROM.

CAL Switch menu

Displays the

current mode.

5

English

No-Picture Problem

If no picture is displayed on the monitor even after the following remedial action is taken, contact your

local dealer.

1. Check the Power indicator.

Symptom Status Possible cause and remedy

No picture

Power indicator does not

light up.

• Check whether the power cord is connected correctly.

If the problem persists, turn off the monitor, and then

turn it on again a f

ew minutes later.

•

Press .

Power indicator lights blue. • Set each RGB adjusting value in <Gain> to higher

level.

Powe

r indicator lights orange.

• Switch the input signal with

.

• Press a key on the keyboard or click the mouse.

• Turn on the PC.

2. Check the error message that remains on the screen.

These messages appear when the input signal is incorrect even if the monitor is functioning.

Symptom Status Possible cause and remedy

The input signal is not

received.

• Check whether the PC is turned on.

• Check whether the signal cable is properly connected

to the PC.

• Switch the input signal with

.

The signal frequency is

outside the speciﬁcation.

Incorrect signal frequency is

shown in red.

• Reboot the PC.

• Change the mode to an appropriate mode using the

graphics board’s utility software.

Refer to the manual

of the graphics board for details.

6

Page is loading ...

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any

means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information confidential unless prior

arrangements are made pursuant to EIZO Corporation’s receipt

of said information. Although every effort has been made to ensure that this manual provides up-to-date

information, please note that EIZO monitor speciﬁcations are subject to change without notice.

http://www.eizo.com

7th Edition-January, 2014

00N0L504G1

(U.M-SURMX210-4)

Printed in Japan.

153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan

Phone: +81 76 277 6792 Fax: +81 76 277 6793

Siemensallee 84, 76187 Karlsruhe, Germany

Phone: +49 721 20321 0 Fax: +49 721 20321 471

中国苏州市苏州工业园区展业路8号中新科技工业坊5B

Phone: +86 512 6252 0100 Fax: +86 512 6252 1508

Eizo MX210 Owner's manual

Eizo MX210 Owner's manual

in other languages

Related papers

Other documents