Aiphone SBX-2BV User manual

Category
Door intercom systems
Type
User manual

This manual is also suitable for

- INSTRUCTIONS -
The SBX-2BH is a surface mount stainless steel enclosure designed for mounting two Aiphone 2-gang
devices horizontally. The SBX-2BV is a similar box used to mount the devices vertically. The enclosures
are weather resistant and include space for wiring inside. These boxes are designed for an intercom sub
station and HID-SS ProxPoint® Plus card reader to be mounted together in a uniform housing for a more
professional and aesthetically pleasing look.
Page 1
3
-
3
/
8
"
4
-
1
1
/
1
6
"
9
-
5
/
8
"
2
-
3
/
8
"
3
-
5
/
1
6
"
2
-
3
/
8
"
4-13/16"
9
-
5
/
8
"
SBX-2BH
SBX-2BV
INSTALLATION:
1. Mount SBX-2BH(V) to wall surface, or on two 1-gang boxes
or rings spaced apart by 4-¾”, center-to-center.
2. Connect supplied speed nuts to mounting ears (8 total).
3. Make wiring connections to devices to be installed in the box.
4. Mount devices to box using screws provided.
5. Remove protective plastic film from the unit.
Mounting
Ears
Mounting Ears
SAMPLE:
HID-SS and LE-SS mounted in SBX-2BH
NOTE: These are not 4-gang surface mount enclosures, but are
enclosures for two separate 2-gang units. The intended use is for
mounting an intercom sub station and a card reader in the same
uniform housing.
COMPATIBLE AIPHONE DEVICES:
Card Reader:
HID-SS Stainless Steel ProxPoint® Plus Card Reader
LEF Series:
LE-SS Vandal Resistant Stainless Steel Sub Station
LE-SSR Vandal Res. With Red Mushroom Call Button
LE-DA Door station with Stainless Steel Faceplate
NEM Series:
NE-SS Vandal Resistant Stainless Steel Sub Station
NE-SSR Vandal Res. With Red Mushroom Call Button
NE-JA Door station with Stainless Steel Faceplate
AI-900 Series:
AI-RS150 Standard Indoor Sub Station
AI-RS160 Indoor Vandal Resistant Sub Station
AI-RS170 Exterior Vandal Resistant Sub Station
AI-RS180 Exterior Emergency Sub Station
IE Series:
IE-SS Vandal Resistant Stainless Steel Sub Station
IE-SSR Vandal Res. With Red Mushroom Call Button
IE-JA Door station with Stainless Steel Faceplate
SPECIFICATIONS:
Mounting: Two 1-gang boxes, or surface mount directly to wall surface
Material: 16-Gauge Stainless Steel
Color: Polished Stainless Steel
Mounting Hardware: 8x32 with T-15 Torx Head
Dimensions (HxWxD)
SBX-2BH: 4-11/16" x 9-3/5" x 3-3/8" (top); 2-3/8" (bottom)
SBX- 2BV: 9-3/5" x 4-11/16" x 3-3/8" (top); 2-3/8" (bottom)
Interior Depth: 2-3/16"
SBX-2BH/V Instr.
PHJS0605
4-¾”
SBX-2BH
(rear view)
SBX-2BV
(rear view)
4-¾”
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
TOLL FREE TECHNICAL SUPPORT:
(800) 692-0200
TOLL FREE FAX LINE:
(800) 832-3765
MOUNTING:
If the unit will be mounted to two 1-gang boxes or rings, the mounting hardware should be
separated by 4-¾” center-to-center, either vertically or horizontally depending on the unit.
1-½”
  • Page 1 1
  • Page 2 2

Aiphone SBX-2BV User manual

Category
Door intercom systems
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI