Metra 95-6518B Installation guide

Metra
Brand
Metra
Model
95-6518B
Category
Car kits
Type
Installation guide

Metra 95-6518B is a dash kit designed for installing a double DIN aftermarket radio into select Ram Trucks manufactured from 2013 onwards (excluding models with an 8.4-inch touchscreen). It includes a radio housing, brackets, and all necessary hardware for a secure and professional-looking installation. The kit is painted matte black to match the factory dash, and it provides a provision for mounting the aftermarket radio's faceplate.

Metra 95-6518B is a dash kit designed for installing a double DIN aftermarket radio into select Ram Trucks manufactured from 2013 onwards (excluding models with an 8.4-inch touchscreen). It includes a radio housing, brackets, and all necessary hardware for a secure and professional-looking installation. The kit is painted matte black to match the factory dash, and it provides a provision for mounting the aftermarket radio's faceplate.

APPLICATIONS
METRA. The World’s best kits.
™
metraonline.com1-800-221-0932
© COPYRIGHT 2014 METRA ELECTRONICS CORPORATION
REV. 6/2/2014 INST95-6518B
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
INSTALLATION INSTRUCTIONS FOR PART 95-6518B
Table of Contents
• Double DIN radio provision
• Painted matte black
• A) Radio housing • B) Brackets
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XSVI-6523-NAV Chrysler interface 2013-up
Antenna Adapter: • 40-EU55 – amplified antenna adapter
Ram Trucks 2013-up (without 8.4 inch touchscreen)
Modifications to factory radio cavity required for this installation
95-6518B
B
Dash Disassembly
– Ram 1500/2500/3500 2013-up ........................... 2
– Ram Chassis Cab 3500/4500/5500 2013-up ....... 2
Kit Assembly
– Double DIN radio provision ................................... 3
• Panel removal tool • Phillips screwdriver
• Socket Wrench
TOOLS REQUIRED
A
95-6518B
1. Remove liner inside tray at the top
center of the dash and remove two
torx screws. (Figure A)
2. Unsnap and remove radio panel.
(Figure B)
3. Remove four screws and remove
radio. (Figure C)
4. The factory rear support will need
to be cut or removed to allow
space for a new radio. The bottom
section can be removed with
two cuts at the bottom corners.
(FigureD)
Continue to kit assembly
Dash Disassembly
2
115V AC
150W
(Figure A)
(Figure B)
(Figure C)
(Figure D)
Remove shaded area
95-6518B
Kit Assembly
Double DIN radio provisions
Note: For proper orientation, the
locating tabs on the Radio Housing
are more to the top of the kit than
bottom. (Figure A
1. Rotate the brackets into the
radio housing. (Figure B)
2. Slide the radio into the bracket/
radio housing assembly and secure
using the screws supplied with the
radio. (Figure C)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
4. Reassemble dash in reverse order
of disassembly.
(Figure C)
3
(Figure B)
(Figure A)
Top of housing
METRA. The World’s best kits.
™
metraonline.com1-800-221-0932
© COPYRIGHT 2014 METRA ELECTRONICS CORPORATION
REV. 6/2/2014 INST95-6518B
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
INSTALLATION INSTRUCTIONS FOR PART 95-6518B
Page is loading ...
Page is loading ...
Page is loading ...
METRA. The World’s best kits.
™
metraonline.com1-800-221-0932
© COPYRIGHT 2014 METRA ELECTRONICS CORPORATION
REV. 6/2/2014 INST95-6518B
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recomienda técnicos
con certificación del Programa
de Certificación en Electrónica
Móvil (Mobile Electronics
Certification Program, MECP).
EL CONOCIMIENTO ES PODER
Mejore sus habilidades de instalación y
fabricación inscribiéndose en la escuela de
dispositivos electrónicos móviles más reconocida
y respetada de nuestra industria. Regístrese en
www.installerinstitute.com o llame al
800-354-6782 para obtener más información y
avance hacia un futuro mejor.
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-6518B
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Metra 95-6518B Installation guide

Metra
Brand
Metra
Model
95-6518B
Category
Car kits
Type
Installation guide

Metra 95-6518B is a dash kit designed for installing a double DIN aftermarket radio into select Ram Trucks manufactured from 2013 onwards (excluding models with an 8.4-inch touchscreen). It includes a radio housing, brackets, and all necessary hardware for a secure and professional-looking installation. The kit is painted matte black to match the factory dash, and it provides a provision for mounting the aftermarket radio's faceplate.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents