Anova SDSS Assembly Instruction

Brand: Anova

Model: SDSS

Type: Assembly Instruction

A

sh/Stash Assembly

instruction sheet

Medium Ash/Stash Parts

1 - Shell 1 - Back 1 - Liner

Medium Ash/Stash Masonry Installation

1 Position back in the desired location

and mark the mounting surface through the

holes.

2 Drill holes in the mounting surface to

the depth required for anchors.

3 Install anchors.

4 Place back over the anchors and

fasten securely.

Wood Installation

1. Same as above

2. Install screws Note: Anchors and screws are

not supplied. Liner may be replaced using a

standard 2 lb. coffee can. Periodic replacement

may prevent discoloration of the unit.

Large Ash/Stash Parts

1 - Shell 1 - Liner 1 - Set of Keys

Large Ash/Stash Masonry Installation

1 Position shell in the desired location

and mark the mounting surface through the

holes.

2 Drill holes in the mounting surface

to the depth required for anchors.

3 Install anchors.

4 Place shell over the anchors and

fasten securely.

Wood Installation

1 Same as above

2 Install screws

Note: Anchors and screws are not supplied.

211 N. Lindbergh Blvd. • St. Louis, MO 63131-7809

800-231-1327 • www.landscapebrands.co

m

1

Anova SDSS Assembly Instruction

Brand: Anova

Model: SDSS

Type: Assembly Instruction

Other documents