2. Riverside Furniture
  3. 37280

Riverside Furniture 37280 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Cora King Panel Bed, including models 37280, 37281, 37272 and 37282. This document provides detailed information on how to assemble the bed using the included hardware and parts. I am ready to help with any questions you might have about the assembly process or the included components.
  • How many people are required to assemble the bed?
    Where should I assemble the bed?
    What is included in the hardware and parts?
Made in Viet Nam
email: info@riverside-furniture.com
Page 1 of 6
Warning :
- Be sure to check all packing material carefully for small parts,which may have come loose inside the carton during shipment.
- To prevent possible scratches and damage, this furniture MUST BE ASSEMBLED BY TWO PEOPLE on a soft surface such as a
blanket or carpet.
Panel Headboard 37280
1 pc.1 pc.
Headboard Post Left Headboard stretcher
1 pc.1 pc.
Hardware and Parts packed with the Headboard
Panel Footboard 37281
1 pc.
Support Leg #8 x 1" Wood Screw
Hardware and Parts packed with the Footboard
2 pcs.
Hardware and Parts packed with the Bed Rail
Headboard Post Right
10 pcs.
H-A H-B H-C H-D
F-A F-B F-C F-D
R-A1 R-B R-C R-D R-E R-F
∅5/16 x 3-1/2"
All-Thread Bolt
∅5/16 x L17 Nut
∅5/16"
Spring Washer
∅5/16"
Curved Washer
8 pcs. 8 pcs. 8 pcs.
8 pcs.
Bed Rails 37272
6/0-6/6 King Bed
37280 --6/0-6/6 Panel Headboard
37281 --6/6 Panel Footboard
37272 --5/0-6/6 Panel Bed Rails
37282 --6/0 Panel Bed Rails
2 pcs.
R-A2
Bed Rails 37282
King Panel Bed
10 pcs.
Cora
Bedroom
Assembly Instructions
1 Set.
R-G 1 pc.
∅5/16" x 16*2mm
Flat Washer
8 pcs.
1 pc.
8 pcs.
5mm Allen Key
6 pcs.2 pcs.
∅5/16"
Spring Washer
∅5/16" x 19*2mm
Flat Washer
∅5/16''-1- 1/2"
Allen Head Bolt
H-E H-F H-G H-H H-I
8 pcs.
∅5/16''-1- 3/4"
Allen Head Bolt
Open Wrench
12mm
R-B R-C R-D R-E R-F
∅5/16 x 3-1/2"
All-Thread Bolt
∅5/16 x L17 Nut
∅5/16"
Spring Washer
∅5/16"
Curved Washer
8 pcs. 8 pcs. 8 pcs.
8 pcs.R-G 1 pc.
∅5/16" x 16*2mm
Flat Washer
8 pcs.
Open Wrench
12mm
Wood Slats 77-1/4" Long
(D) 7-1/2" x (W)1- 1/4"(H) 1- 1/4"
Made in Viet Nam
email: info@riverside-furniture.com
Page 2 of 6
6/0- 6/6 King Bed
37280 -- 6/6-6/0 Panel Headboard
STEP 2
H-H
H-G H-F
H-I
STEP 1
H-B
H-C
H-D
H-A
37280
King Panel Bed
H-H
H-GH-E
H-I
Cora
Bedroom
Assembly Instructions
Back View
Made in Viet Nam
email: info@riverside-furniture.com
Page 3 of 6
H-A
37280
F-A
STEP 3
R-B
37281
6/0-6/6 King Bed
37280 --6/0-6/6 Panel Headboard
37281 --6/6 Panel Footboard
King Panel Bed
Cora
Bedroom
Assembly Instructions
Made in Viet Nam
email: info@riverside-furniture.com
Page 4 of 6
King Panel Bed
H-A
F-A
Adjustable Leveler
37272
STEP 4
STEP 6
R-A1
R-A1
F-D
F-B
R-B
R-C
R-D
R-G
R-F
R-E
Cora
Bedroom
Assembly Instructions
STEP 5
F-C
F-B
Attention : The bed slat
straps should be located on the
bottom side when properly installed.
Made in Viet Nam
email: info@riverside-furniture.com
Page 5 of 6
Cal King Panel Bed
STEP 7
37282
H-A
F-A
Adjustable Leveler
F-D
F-B
STEP 8
R-A2
R-A2
R-G
R-F
R-E
R-D
R-C
R-B
Cora
Bedroom
Assembly Instructions
STEP 9
F-C
F-B
Attention : The bed slat
straps should be located on the
bottom side when properly installed.
Made in Viet Nam
email: info@riverside-furniture.com
Page 6 of 6
USE THESE HOLES FOR ATTACHING WOOD SIDE RAILS.
ALL HARDWARE IS INCLUDED WITH THE SIDE RAILS
USE THESE HOLES FOR ATTACHING
A (6/0) CALIFORNIA KING METAL BED FRAME
CUSTOMER TO PROVIDE THE HARDWARE NEEDED
USE THESE HOLES FOR ATTACHING
A (6/6) KING METAL BED FRAME
CUSTOMER TO PROVIDE THE METAL HARDWARE NEEDED
THE HEADBOARD MAY BE USE ALONE WITH
A CALIFORNIA KING OR A STANDARD KING
SIZE METAL BED FRAME.
King Panel Bed
6/0- 6/6 King Bed
37280 -- 6/6-6/0 Panel Headboard
Cora
Bedroom
Assembly Instructions
/