2. Epson
  3. TrueOrder KDS

Epson TrueOrder KDS User manual

  • Hello! I've reviewed the Epson TrueOrder KDS Quick User Manual focusing on POS Menu Routing. This document outlines how to send print jobs from your POS directly to kitchen display stations over the network, centralizing menu management on your POS. I'm ready to assist you with any questions you have about setting up or using this system.
  • What is POS Menu Routing in Epson TrueOrder KDS?
    Where does the menu management remain in POS Menu Routing?
    What is required for Multi-Station setup?
111-56-QUM-010
Rev 3.00
EPSON is a registered trademark and EPSON is a registered logomark of Seiko Epson Corporation. All other product and brand
names are trademarks and/or registered trademarks of their respective companies. Epson disclaims any and all rights in these marks.
Copyright 2023 Seiko Epson Corporation.
POS Menu Routing
About this guide:
This guide consists of 2 sections:
• Overview- A detailed description of what POS Menu Routing is in an
Epson TrueOrder Kitchen Display System (KDS).
• How to Configure POS Menu Routing – A procedure to be followed
within a Multi-Station KDS Setup.
Overview
The POS Menu Routing function allows all print jobs to be sent from the POS
directly to their intended display stations over the network. Thus, the POS
determines which items are sent where and all menu management remains on
the POS.
Figure 1: POS Menu Routing Set- Up
Grill Station
(Master)
Fry Station
Point Of Sale
Epson Café
Server: Mike Jones
Order: 1079
Table: 1
1 Classic Hamburger
Ketchup
Onions
Lettuce
Epson Café
Server: Mike Jones
Order: 1079
Table: 1
1 French Fries
POS Menu Routing
Quick User Manual
111-56-QUM-010
Rev 3.00
How to Configure POS Menu Routing
This guide assumes that you have a Multi- Station setup as described by the
Epson Multi-Station Quick Start Manual.
1. How to Configure
1. Select Application Settings.
2. Select POS Connected Device.
3. Select POS Menu Routing.
4. Click Save.
5. Click Publish.
Note: The POS needs to be configured to send the print jobs directly to the
display stations. Of course, how this is configured depends on the POS and is
not possible with all POS systems. Please check with your POS supplier.
/