DreamGEAR DGUN-935 User manual

Brand: DreamGEAR

Model: DGUN-935

Category: Gaming controls

Type: User manual

USER’S GUIDE

86 in 1

i r

eless

Package Contents:

• 1 Main Controller

• 1 Receiver

• 1 Receiver Pack

• User’s manual

86 in 1 Instructions:

1. The main controller requires 3 “AA”

batteries. Remove the battery lid using a flat-

head screwdriver and place the batteries

inside. Replace the battery lid.

2. The receiver pack requires 4 “AA”

batteries. Remove the battery lid and place

the batteries inside. Replace the battery lid.

3. Connect the receiver to the receiver pack.

4. Plug the Audio cable (white) into your video

displays audio input and plug the video cable

(yellow) into your video displays video input.

5. Power on the 86 in 1 controller by switch-

ing the power switch to the “on” position.

6. Power on the receiver by switching the

power switch to the “on” position.

7. Confirm your video display is set to the

proper video input (for example, if you plug the

86 in 1 into your video displays input 1,

switch your video display to the corresponding

input).

8. Choose game and press the “start” button

to begin game play. Pressing “start” during

game play will pause your game, pressing

“start” again will un-pause your game.

CUSTOMER SUPPORT 1-877-999-3732

Infrared Technology:

1. The 86 in 1 uses Infrared technology. To avoid

latency, always make sure the main gaming unit is

directly in front of where you are playing.

Trouble Shooting:

Problem: 86 in 1 will not power on?

Solution: Confirm batteries in the main gaming unit

are inserted correctly.

Solution: Batteries may be drained, so try replacing

the batteries with new ones.

Problem: 86 in 1 is not accurate and/or there is

latency when playing?

Solution: Confirm batteries in controller/receiver

pack are inserted correctly.

Solution: Batteries may be drained, so try replacing

the batteries with new ones.

dreamGEAR

P.O. Box 478

Torrance, CA 90508

www.dreamgear.net

Sleep Mode:

The 86 in 1 controller will go into sleep mode after 5

minutes of non-use. When the controller is in sleep

mode the TV screen will change colors and eventually

become solid black. To wake the controller, simply

turn the 86 in 1 controllers power switch off and

then on again and your ready to play.

note: when you power on the 86 in 1 controller the LED

will not turn on, this is normal. The LED only illuminates

when buttons are used on the controller.

note: to save battery life always switch the power

on the

controller and receiver to the off position when not in

use.

dreamGEAR

P.O. Box 478

Torrance, CA 90508

www.dreamgear.net

86 in 1

i r

eless

DreamGEAR DGUN-935 User manual

Brand: DreamGEAR

Model: DGUN-935

Category: Gaming controls

Type: User manual

Download PDF

report

DreamGEAR DGUN-935 User manual

DreamGEAR DGUN-935 User manual

Related papers

Other documents