2. Computers & electronics
  3. Computer components
  4. Chassis components
  5. Racks
  6. Rack accessories
  7. iStarUSA
  8. TC-RAIL-20
TC-RAIL-20

iStarUSA TC-RAIL-20, TC-RAIL-24, TC-RAIL-26 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the iStarUSA TC-RAIL-20 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTALLATION MANUAL
Ball bearing sliding rails build from same SECC steel with length of
20, 24, and 26. The rail is built to last and can h old system weight up
to 200lbs. Easy maintenance to s lide system in and out of cabinet.
Package Contents
Copyright
Copy right © 2006 by iStarUSA, Inc., all ri ght reserved. No part of this public ation
may be reprodu ced, tr ansmitted, transcribed, stored in a retrieval system, translated
into any language, in any form or by an m eans or otherwise, without the p rior written
pe rmission of I-Star USA Inc. 727 Phillips Dr., City of Industry, CA 91748.
iStarUSA Inc. reser ves the right to make modification and additi ons to this prod uct and
manu al without notice or taking any liability.
iStarUSA In c. assumes no liability for errors or omissions in this docume nt. Nor d ose
iStarUSA In c. make an y commitment to update the informatio n contai ned herein.
Pictur es
i n this document are for demonstration purpose only and may no t be the same
as the actual product .
Disclaimer
TC-Rail Series
TC-Rail Series
TC-Rail Series
Installation
(Pull the center slide all the way out until it reaches the end)
You will see a locking clip at the end point of the center slide.
Push it down and unlock the center slide.
Now put the center slide right next to the rackmount chassis. You should be able to find
screw holdes on both sides of chassis. Holes are used for mounting the center slide.
Later, the center slide will be use for attaching the sliding rail.
Secure outter rail to L bracket with
screws and nuts.
Aline front outter rail to the indent of L bracket between Point A & B.
B
Reattach inner rail back to center rail
Repeat previous steps to secure
sliding rails on both sides.
/