Kramer Electronics WA-1XLM User manual

Wall Plate (WP) Series

Passive Wall Plate Devices:

WA-1XLF, WA-1XLM

For the latest information on our products and a list of Kramer

distributors, visit our Web site: www.kramerelectronics.com

Kramer Electronics, Ltd.

Web site: www.kramerelectronics.com

E-mail: info@kramerel.com

P/N: 2900-000332 REV 1

Passive WP Series (Wall Plate Devices and Connection Modules)

Congratulations on purchasing your Kramer WA-1XLF and WA-1XLM which

are ideal for the following applications:

 Professional audio and video electronics cabling

 Microphones, mixers, amplifiers, speakers and so on

You can attach the WA-1XLF and the WA-1XLM to work with the WP Frame.

The WA-1XLF is a female 3-PIN XLR

connector.

The WA-1XLM is a male 3-PIN XLR

connector.

The following is the rear side PINOUT

of the WA-1XLF:

The following is the rear side PINOUT

of the WA-1XLM:

Balanced audio PINOUT: Unbalanced audio PINOUT:

PIN Signal PIN Signal

1 Ground / Screen 1 Ground / Screen

2 In phase / +ve / Hot 2 Signal

3 Out of phase / -ve / Cold 3 Ground / Screen

(connect to PIN 1)

This manual is also suitable for

Download PDF