Oricom M800 is a cordless telephone with answering system that allows you to answer calls, manage your messages, and access your phonebook, all from the convenience of your cordless handset.
Here are some of the features and possible use cases of the Oricom M800:
-
Cordless operation: The cordless handset allows you to move around your home or office while still being able to answer calls or access your phonebook.
-
Answering system: The answering system allows you to screen your calls and record messages from callers, so you never miss an important message.
-
Phonebook: The phonebook allows you to store up to 50 names and numbers, so you can easily call your friends, family, or colleagues.
Oricom M800 is a cordless telephone with answering system that allows you to answer calls, manage your messages, and access your phonebook, all from the convenience of your cordless handset.
Here are some of the features and possible use cases of the Oricom M800:
-
Cordless operation: The cordless handset allows you to move around your home or office while still being able to answer calls or access your phonebook.
-
Answering system: The answering system allows you to screen your calls and record messages from callers, so you never miss an important message.
-
Phonebook: The phonebook allows you to store up to 50 names and numbers, so you can easily call your friends, family, or colleagues.
USER GUIDE
Keep this user guide for future reference. Always retain your proof of purchase in case of
warranty service and register your product on line at: AUSTRALIA: www.oricom.com.au
Oricom DECT Digital
Cordless Telephone
with Answering System
M800 Series
TABLE OF CONTENTS
SAFETY INFORMATION 1
GETTING STARTEd 3
PhONE FuNCTION KEYS 5
BATTERY ChARGING 9
SCREEN dISPLAY ICON 10
MENu TREE 11
TELEPhONE OPERATION 13
hANdSET ANd BASE OPTIONS 17
PhONEBOOK 20
CALLER Id 22
CLOCK ANd ALARM 23
dO NOT dISTuRB 25
BLOCK LIST 26
AdVANCEd SETTINGS 27
ANSWERING SYSTEM 29
TROuBNLEShOOTING GuIdE 34
WARRANTY 36
CuSTOMER SuPPORT 38
1
TABLE OF CONTENTS
SAFETY INFORMATION
• Becausethephoneworksbysendingradio
signalsbetweenbasestationandhandset,
wearers of hearing aids may experience
interference in the form of a humming noise.
• Yourphonecaninterferewithelectrical
equipmentsuchasansweringmachines,TV
andradiosets,clockradiosandcomputersif
placed too close. It is recommended that you
positionthebaseunitatleastonemetrefrom
such appliances.
• Thistelephonecomplieswithapplicable
safety requirements for exposure to radio
waves (EMR). The mean power of this
telephone does not exceed 20mW limit at
which point testing is required.
• Privacyofcommunicationsmaynotbe
ensured when using this telephone.
• Theearpieceofthehandsetmayattractsmall
metalobjectssuchasstaplesandpins.Care
shouldbetakenwhenplacingthehandset
near these items.
• Thistelephoneisnotdesignedformaking
emergency telephone calls when the mains
power fails. Always have a corded phone
availabletobeabletomakeandreceivecalls
to emergency services if the mains power fails.
IMPORTANT
• Avoidexposureofthistelephonetomoisture
or liquid.
• Topreventelectricshock,donotopenthe
handsetorbasecabinet.
• Avoidmetalliccontact(e.g.metalclips,keys)
betweenthebatterycontactsandcharging
conductors.
• Thereisaslightchancethatthetelephone
couldbedamagedbyanelectricalstorm.Itis
recommended that users unplug the phone
fromthemainssupplyandtelephonesocket
during a storm.
• Donotusethehandsetinanexplosivehazard
areasuchaswherethereisgasleaking.
• Followthelocalregulationsregardingthe
disposalofyourpackingmaterials,exhausted
batteriesandusedphone.Whereverpossible,
recycle those materials.
• Thisphoneshouldnotbeusednearintensive
caremedicalequipment.Personswith
pacemakersshouldconsulttheirDoctoror
cardiologistbeforeusingthisphone.
• Cleanwithadry,soft,lint-freecloth.Never
usecleaningagents,particularlyaggressive
solvents.
2
GETTING STARTEd
SAFETY INFORMATION
• Donotuseyourtelephoneduringanelectrical
stormthunderstormasitispossibletogetan
electricshock.Refertoinformationcontained
in White pages directory.
• Thisphoneisdesignedforconnectionto
aPSTNtelephonelineorananalogue
extensionportofaPBXsystem.Ifyou
connect this device to a digital extension of a
PBX,damagemayresulttothePBX.
Tip!
It is good practice to put the cordless handset on the
charging cradle when it is not in use to ensure that
the handset is always fully charged.
DONOTUSESTANDARD/ALKALINE
BATTERIESINTHISPRODUCT,AS
THEREISARISKOFEXPLOSIONAND/
ORINJURY.ONLYUSETHENi-MH
RECHARGEABLEBATTERIESSPECIFIED
INTHISUSERGUIDE.CONTACTORICOM
FORREPLACEMENTBATTERIES.
RISKOFEXPLOSIONIFBATTERYIS
REPLACEDBYANINCORRECTTYPE.
Neverusenon-rechargeablebatteries.
Use recommended type supplied with this
product.
• Neverusealkalineorlithiumbatteries.
• Donotdisposeofthebatteriesinare,as
they can explode.
• Donotopenormutilatethebattery.
Released electrolyte is corrosive and can
causedamagetotheeyesorskin.Itcan
betoxicifswallowed.
• Avoidcontactwithmetalobjectswhen
handlingthebattery.Theseobjects
couldshortoutthebatteriesorcausethe
conductortooverheatresultinginburns.
• Donotattempttorechargethebatterycell
byheatingit.Suddenreleaseofbattery
electrolytecancauseburnsorirritationto
theeyesorskin.
WARNING
!
3
GETTING STARTEd
SAFETY INFORMATION
If you have a Broadband line
If you connect your telephone to a line with a
broadband conne ction, you must connect an in
line filter (not supplied) between the telephone
socket and your phone base to ensure that your
broadband and m800 will work properly.
If you do not install the filter you will experience
interference on the cordless phone and your
Broadband may suffer dropouts. Please refer to
the user guide of the in line filter for installation.
In a home with broadband, every telephone, fax
or answering system must have a in-line filter
connected, not just the one at the telephone point
that your modem is connected to.
Additional in-line filters can be purchased from
electronic stores.
Telephone base and charger
installation
1. Plugthesmallerendofthepoweradaptor
intothepowerjackatthebottomofthe
telephonebase.
2. Plugoneendofthetelephonelineintothe
jackatthebottomofthetelephonebase.
3. Plugtheotherendofthetelephonelineintoa
telephonewalljack.
4. Plugthelargerendofthepoweradaptorintoan
electricaloutletnotcontrolledbyawallswitch.
Parts Checklist
Dependingonthemodelyouhavepurchasedthis
packshouldcontainthefollowingitems:
Ifanyoftheseitemsaremissing,pleasecontact
Oricomdirectly.
Single Twin
Baseunit 1 1
Cordlesshandsets 1 2
Chargingcradle 0 1
Poweradaptors 1 2
Line cord 1 1
User guide 1 1
HandsetRechargeableNi-MH
1.2V400mAhBatteries
2 4
4
PhONE FuNCTIONS KEYS
GETTING STARTEd
4. Chargethehandsetbyplacingitinthe
telephonebaseorcharger.Thelightonthe
handset is on when charging.
Toreducetheriskofreorpersonalinjury,useonly
theOricomapprovedmodel(400mAh1.2VNi-MH)
whichiscompatiblewiththisunit.
CAUTION
!
• Observetheproperpolarity,ordirection,
ofanybattery.Reverseinsertionof
thebatterycellcanresultinleakageor
explosion.
• Removethebatteriesifyoudonotplanto
use the product for several months at a time.
• Followthelocalregulationsregarding
thedisposalofyourpackingmaterials,
exhaustedbatteriesandusedphone.
Whereverpossible,recyclethosematerials.
WARNING
!
Use only the power adaptor that came with this
unit.(Telephonebase:6Vdc/500mA,charger:
6Vdc/150mA).Usingotherpoweradaptorsmay
damagetheunit.Contactyourlocaldistributor
if you need to order replacement for the power
adaptors.
CAUTION
!
Purchasing additional handsets
Youmayexpandyourcordlesssystembyadding
morehandsets(M8050).Thesecanbepurchased
separately from the retailer where you purchased
theproduct,ordirectlyfromOricom(Australia)
www.oricom.com.au.
TheM800canaccommodateatotalof5cordless
handsets.
Battery installation
Foroptimumbatteryperformance,chargethebattery
for14hoursbeforerstuse.
1. Removethebatterycompartmentcover.
2. InserttheAAArechargeablebatteriesin
thebatterycompartment,matchingthe+/-
polaritymarkings.
3. Alignthecoveragainstthebattery
compartment and slide it upwards until it
clicksintoplace.
5
PhONE FuNCTIONS KEYS
GETTING STARTEd
Telephone base layout (TAM Version)
6
PAGE -Presstopageallsystemhandsets.
Answeron/off -Presstoturntheansweringsystemonoroff.
DND -PresstoturnDNDmodeonoroff.
Volumedown
-Presstodecreasethetelephonebaseringervolumewheninstandby
mode.
-Presstodecreasethevolumeduringplaybackorcallscreening.
Volumeup
-Presstoincreasethetelephonebaseringervolumewheninstandby
mode.
-Presstoincreasethevolumeduringmessageplaybackorcallscreening.
Message
window
Message window
-Displaysthenumberofmessages.
-Displaysthemessagenumberduringplayback.
Delete
-Presstodeletethemessageduringplayback,orpressandholdto
delete all old messages.
Repeat
-Presstorepeatamessageorpresstwicetoplaytheprevious
message.
Play/Stop -Presstoplaymessagesorstopplayback.
Skip -Presstoskiptothenextmessage.
PhONE FuNCTIONS KEYS
7
Handset layout
PhONE FuNCTIONS KEYS
PhONE FuNCTIONS KEYS
8
CID/Volumeup
-Presstoreviewthecalllogwhenthetelephoneisnotinuse.
-Whileinmenu,presstoscrollup.
-Duringacall,presstoincreasetheincomingvolume.
OFF/Cancel
-Duringacall,presstohangup.
-Duringprogramming,presstocancelandexitwithoutmakingchanges.
(ash)
-Duringacall,presstoansweranincomingcallifyoureceiveacallwaiting
alert(ifyouhavesubscribedtothecallwaitingfeaturefromyourservice
provider).
-Presstoaccessmessageplaybackwheninidlemode(forTAMversiononly)
Menu/OK/Mute
-Presstoshowmenu.
-Presstoselectanitem,ortosaveanentryorsetting.
-Presstomuteacall,pressagaintoresumeconversation.
Delete/INT
-Presstodeletethelastnumberorletterentered.
-Presstoinitiateanintercomcallortransferacall.
Phonebook -Presstoreviewthephonebookwhenthetelephoneisnotinuse.
Talk/Speaker
-Presstomakeoransweracall.
-Presstoswitchtospeakerphoneduringacallormessageplayback.
-Duringacall,presstoswitchbetweenspeakerphoneandnormal
handset use.
-*/ keylock -LongPresstolock/unlockthekeypadwheninidlemode
-Volumedown
-Whileinmenu,presstoscrolldown.
-Duringacall,presstodecreasetheincomingvolume.
Redial -Presstoreviewrediallist.
#/Pause/Ringoff
-Pressandholdtoturntheringeroff.
-
Pressandholdtoaddadiallingpausewhendiallingorentering
numbersintophonebook.
PhONE FuNCTIONS KEYS
9
Thefollowingtablesummarizesthebatterychargeindicatorsandwhatactionsneedtobetaken.
Battery indicators Battery status Action
Batteryiconisscrolling. Batteryischarging. Keepthehandsetinthetelephonebaseorchargerwhen
not in use.
Batteryiconisonsteady. Batteryiscompletelycharged. The handset is ready for use.
Itwilltakeapproximately2hoursforthebatteryiconto
indicate a full charge even if the handset is only removed
fromthetelephonebaseorchargerforashorttime
and replaced. This is a normal operation and does not
indicateabatteryissue.
Batteryiconisemptyand
the screen shows
LOW
BATTERY
.
Batteryislow. Placethehandsetinthetelephonebaseorcharger
to charge without interruption (at least 30 minutes)
beforeuse.
Thescreenisblank. Batteryhasnopowerwhile
the handset is out of the
telephonebaseorcharger.
Placethehandsetinthetelephonebaseorcharger
for at least 14 hours without interruption. See
troubleshootingforhelpifthescreenremainsblank
after charging.
Battery charging
PhONE FuNCTIONS KEYS
BATTERY ChARGING
PACK CONTENTS
10
Thefollowingtablesummarizesthebatterydisplayindicators.
Item Meaning
• Displayswhenthetelephonebaseiswithinreceptionrange.
• Flasheswhenthetelephonebaseisoutofrange.
• Scrollstoindicatebatterychargingwhenhandsetisinthetelephone
baseorcharger.
• Flashesandemptywhenbatterylevelislow.
• Speakerphoneisinuse.
• Displayswhenthereisanewvoicemailmessage.(Availableonlyif
youhavesubscribedtovoicemailservicefromyourtelephoneservice
provider)
• Displayswhenthealarmisset.
• Energy saving mode is activated.
• Displayswhentheringeristurnedoff.
• Displayswhenansweringsystemison.
• Flasheswhentherearenewmessages.
Screen display icon
SCREEN dISPLAY ICON
PACK CONTENTS
11
Menu tree
Main Menu Sub-menu 1
Sub-menu2
PLAYMESSAGES(onlyforTAMversion)
ANSSYSTEM(onlyforTAMversion)
ANSWERMODE
ANSWER&REC
ANSWERONLY
OFF
ANNOUNCEMENT
DEL.ALLOLD
RECORDMEMO
SETTINGS
RINGDELAY
REMOTEACCESS
REMOTECODE
HSSCREENING
VOICELANG.
PHONEBOOK
ADDNEW
EDITCONTACT
DELETEENTRY
DELETEALL
BLOCKLIST
ADDNEW
EDITCONTACT
DELETEENTRY
DELETEALL
PROGRAMDND
OFF
ONETIME
DAILY
SCREEN dISPLAY ICON
MENu TREE
12
CLOCK&ALARM
SETDATE/TIME
SETFORMAT
TIMEFORMAT
DATEFORMAT
ALARM
ALARMTONE
SETTINGS
HANDSETNAME
LANGUAGE
EQUALIZER
ENERGYSAVE
AUTOHANG-UP
ANTOANSWER
HANDSETTONES
RINGVOLUME
EXT.RINGTONE
INT.RINGTONE
KEYBEEP
BASETONES
BASEMELODY
BASEVOLUME
ADVSETTING
CALLBARRING
PIN
REGISTER
DEREGISTER
RESET
RECALLTIME
FIRSTRING
MENu TREE
13
Telephone operation
Make a call
1. Press[
].
2. Dialthephonenumberafteryouhearthedial
tone.
Predial a call
1. Dialthephonenumberusingthekeypad.
Ifyoumakeanerrorwhiledialling,youcan
press[
] to erase the last digit entered.
2. Press[
].
Answer a call
Press[
] to answer an incoming call.
Whenthereisanincomingcall,thescreenand
keypadbacklightwillbeon.
End a call
Press[
]orplacethehandsetinthetelephonebase
or charger to end a call.
Speakerphone
Anytimeduringacall,press[
]toswitchbetween
speakerphoneandnormalhandsetuse.Whenthe
speakerphoneisactive,thehandsetscreenshows[ ].
Volume control
Youcanadjustthevolumeofthehandsetor
speakerphoneanytimeduringacall.
Onthehandset,press[
]toincreaseor[
] to
decrease the volume.
Make a call using the redial memory
Thelast10telephonenumberspreviouslydialledare
stored in the redial list (up to 24 digits each).
1. Press[
].
2. [
]/[
]:selectthedesiredphonenumber->
[
] to dial.
Note:
Thescreenshowstheelapsedtimeasyoutalk(in
hours,minutesandseconds).
Note:
Onlythelisteningvolumecanbeadjusted.
Note:
Usingthespeakerphonewilldrainthebattery
faster than the normal handset use.
MENu TREE
TELEPhONE OPERATION
14
Save a number from the redial list to
the phonebook
1. [
].
2. [
]/[
]:selectthedesiredphonenumber->[
].
3. [
]/[
]:SAVENUMBER->[
].
4. Enterthenamebyusingthekeypadandthen
press[
].
5.Editthenumberbyusingthekeypadif
necessary,andthenpress[
].
Delete number from the redial list
1. [
].
2. [
]/[
]:selectthedesiredphonenumber->[
].
3. [
]/[
]:DELETE->[
]->CONFIRM?->[
]
todeletetheselectednumber.
-OR-
[
]/[
]:DELETEALL->[
]->CONFIRM?->
[
]todeleteallnumbers.
Mute
The mute function allows you to turn off the
microphonewhileonacall.Youcanheartheother
partybuttheotherpartycannothearyou.
1. Press[
] during a call.
2. Press[
] again to resume conversation.
Handset page
Youcanlocateamisplacedhandsetbypagingit.
1.Press[
]onthetelephonebase.All
registeredhandsetsbeepforoneminute.
2. Press[
]onthetelephonebaseorpress[
]
on any handset to stop paging.
Intercom (only applicable for models
with multiple handsets)
Thesystemallowsanintercomcallbetweentwo
handsetsregisteredtothesametelephonebase.
To initiate an intercom call
1. Press[
].
• If your telephone system has only two
handsetsregistered,theintercomcallwillbe
automatically directed to the other system
handset.
• If your telephone system has more than
twohandsetsregistered,enterthehandset
numberyouwanttocallbyusingthekeypad
1–5.
Note:
ThescreenshowsMUTEONwhenmutefeature
is activated.
TELEPhONE OPERATION
15
2. Press[
] to answer the intercom call on the
other handset.
3. Toendtheintercomcall,press[
].
To answer an incoming call during intercom
Youwillhearanalerttonewhenyoureceivean
incoming call during intercom.
• Press[
] to answer the incoming call and
end the intercom.
• Press[
] to answer the incoming call and
puttheintercomonhold.Pressandhold
[
]toswitchbetweenintercomandthe
incoming call.
• Pressandhold[
]toconferencewithboth
the incoming call and the intercom.
To initiate an intercom during a call
Youcanintercomwithanothersystemhandset
duringacall,orinviteanothersystemhandsettojoin.
1. Press[
] during a call.
• If your telephone system has only two
handsetsregistered,theintercomcallwillbe
automatically directed to the other system
handset.
• If your telephone system has more than two
handsetsregistered,youwillneedtoenter
thehandsetnumberyouwanttointercomto
byusingthekeypad1–5.
The call is placed on hold while the intercom
isestablishedwiththeotherhandset.
2. Press[
] to answer the intercom on the
other handset.
3.Youcanchoosefromoneofthefollowing
options for this intercom call.
• Pressandhold[
]toconnectbothhandsets
to the call.
• Press[
] on the originating handset to
alternatebetweentheintercomandthecall.
• Press[
] on either handset to terminate
the intercom on that handset. The call will
continue on the other handset.
Notes:
1) Theintercomcallcanbecancelledbeforeit
isansweredbypressing[
]or[
] on the
originating handset.
2) Ifthehandsetbeingcalleddoesnotanswer
withinoneminute,thepagingwillbecancelled.
Note:
Theintercomcallcanbecancelledbeforeitis
answeredbypressing[
] on the originating
handset.
TELEPhONE OPERATION
TELEPhONE OPERATION
16
Push to talk (PTT) (only applicable
for models with multiple handsets)
Youcandirectlybroadcastmessagestothe
speakerphoneofanyregisteredhandsetinthe
system.
To initiate a PTT
1. PressthePTTbuttonontherightsideofthe
handset.
• If your telephone system has only two
handsetsregistered,thebroadcastwillbe
automatically directed to the other system
handset.
• If your telephone system has more than two
handset.Press[
]/[
] to select the handset
youwanttobroadcastthemessage,orselect
ALLtobroadcasttoallhandsetsandthen
press[
].
2. PRESSANDHOLD(PTT)TOTALKshows
on the screen when the connection is set
betweentheinitiatinghandsetandthe
destination handset.
3.Pressandholdthe(PTT)buttononeither
handsettostartthebroadcast.
Note:
Connectionsetbetweenhandsetslastsfor30
minutesafteritisestablished,or30minutesafter
thelastbroadcast.Youwillneedtoperformthe
aboveoperationagainifyouwanttoinitiateaPTT
toanothersystemhandsetorafterthe30-minute
time out.
TELEPhONE OPERATION
17
Handset options
Ring volume
Youcansetthehandsetringervolumefromlevel1
tolevel5orturntheringeroff.
1. [
].
2. [
]/[
]:HANDSETTONES->[
].
3. [
]/[
]:RINGVOLUME->[
].
5. [
]/[
]:selectthedesiredlevel->[
].
EXT. Ring Tone
Youcanselectfrom10ringtones.
1. [
].
2. [
]/[
]:HANDSETTONES->[
].
3. [
]/[
]:EXT.RINGTONE->[
].
4. [
]/[
]:selectthedesiredmelody->[
].
INT. Ring Tone
Youcanselectfrom10ringtones.
1. [
].
2. [
]/[
]:HANDSETTONES->[
].
3. [
]/[
]:INT.RINGTONE->[
].
4. [
]/[
]: select thedesiredmelody->[
].
Key tone
Thehandsetcanbeprogrammedtoemitatone
witheachkeypress.Tochangethekeytone
setting:
1. [
].
2. [
]/[
]:HANDSETTONES->[
]
3. [
]/[
]:KEYBEEP->[
]
4. [
]/[
]:selectONorOFF->[
]
Handset Name
To change the handset name:
1. [
].
2. [
]/[
]:SETTINGS->[
]
3. [
]/[
]:HANDSETNAME->[
]
4. Editthenamebyusingthekeypadandthen
press[
].
Note:
Pressandholdthe[
]keytoswitchtheringer
betweenonandoffwhenthehandsetisin
standbymode.The icon displays on the screen
when ringer off feature is activated
TELEPhONE OPERATION
hANdSET ANd BASE OPTIONS
18
Display language
YoucanselectENGLISH,DEUTSCH,FRANCAIS,
ITALIANO,ESPAÑOL,TüRKCE,POLSKIor
PORTUGUêSasthedisplaylanguage.Thedefault
settingisENGLISH.
To change the display language:
1. [
].
2. [
]/[
]:SETTINGS->[
]
3. [
]/[
]:LANGUAGE->[
]
4. [
]/[
]: select thedesiredsetting->[
]
Equalizer
Thisfeatureallowsyoutochangethebalanceofthe
audioofthehandsettobestsuityourhearing.
1. [
]
2. [
]/[
]:SETTINGS->[
]
3. [
]/[
]:EQUALIZER->[
]
4. [
]/[
]:selectfromNATURAL,BASSorTREBLE.
5. [
].
Energy save
Thisfeatureenablesthehandsettooperatein
energysavingmode.Withthisfeatureturnedon,the
handsetwillautomaticallyturnthehandsetbacklight
off.
1. [
].
2. [
]/[
]:SETTINGS->[
].
3. [
]/[
]:ENERGYSAVE->[
].
4. [
]/[
]:selectONorOFF->[
].
Auto Hang-Up
This feature allows you to release the line
automaticallywhenyouputthehandsetbackonthe
charge-cradle.
1. [
].
2. [
]/[
]:SETTINGS->[
].
3. [
]/[
]:AUTOHANG-UP->[
].
4. [
]/[
]:selectONorOFF->[
].
Note:
Ifyoumakeanerrorwhiledialling,youcanpress
[
] to erase the last digit entered.
Note:
WhenENERGYSAVEisturnedon,the icon
shows on the handset screen.
hANdSET ANd BASE OPTIONS
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
Oricom M800 is a cordless telephone with answering system that allows you to answer calls, manage your messages, and access your phonebook, all from the convenience of your cordless handset.
Here are some of the features and possible use cases of the Oricom M800:
-
Cordless operation: The cordless handset allows you to move around your home or office while still being able to answer calls or access your phonebook.
-
Answering system: The answering system allows you to screen your calls and record messages from callers, so you never miss an important message.
-
Phonebook: The phonebook allows you to store up to 50 names and numbers, so you can easily call your friends, family, or colleagues.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
SWITEL DCT5572 Owner's manual
-
Hyundai HDT-L23 User manual
-
SWITEL DC591 Owner's manual
-
-
AEG SOLO 15 Owner's manual
-
Sanyo LNS-W10 User manual
-
Binatone Solas 1520 User manual
-
-
Binatone iDECT Carrera Combo Plus User manual
-
Conairphone TAD1212 Owner's manual
