Pioneer U-05 User manual

U-05-

S

USB D/A Converter

Convertisseur D/A USB

USB D/A-Wandler

Convertitore D/A USB

USB D/A-omzetter

Convertidor D/A de USB

Quick Start Guide

Guide rapide

Kurzanleitung

Guida di avvio rapido

Snelstartgids

Guía de inicio rápido

Thank you for buying this Pioneer product. This Quick Start Guide includes instructions for

basic connections and operations to allow simple use of the unit. For detailed descriptions of

the unit, see the “Operating Instructions” provided on the included CD-ROM ( ).

Merci pour l’acquisition de ce produit Pioneer. Ce Guide de démarrage contient les instruc-

tions nécessaires pour effectuer les connexions et utiliser les fonctions principales de

l’appareil. Pour plus d’informations concernant l’utilisation de l’appareil, consultez le “Mode

d’emploi” sur le CD-ROM ( ) fourni.

Vielen Dank, dass Sie sich für dieses Pioneer-Erzeugnis entschieden haben. Diese Kurzanlei-

tung enthält Anweisungen für die grundlegenden Anschlüsse und Operationen, die einen

einfachen Gebrauch der Einheit ermöglichen. Zu genaueren Beschreibungen der Einheit

siehe die auf der mitgelieferten CD-ROM ( ) befindliche “Bedienungsanleitung”.

Vi ringraziamo per avere acquistato questo prodotto Pioneer. Questa Guida di avvio rapido

comprende istruzioni per i collegamenti fondamentali e per le operazioni essenziali di questa

unità. Per una descrizione dettagliata dell’unità, vedi le “Istruzioni per l’uso” contenute nel

CD-ROM ( ) accluso.

Hartelijk dank voor de aanschaf van dit Pioneer product. In deze Quick Start-gids vindt u de

instructies voor de basisaansluitingen en basisbediening voor eenvoudig gebruik van het

systeem. Voor meer gedetailleerde informatie van het systeem wordt u verwezen naar de

“Handleiding” die op de bijgeleverde CD-ROM ( ) staat.

Muchas gracias por haber adquirido este producto de Pioneer. Esta Guía de inicio rápido

incluye instrucciones para realizar las conexiones y operaciones básicas que le permitirán

hacer un uso sencillo de la unidad. Para conocer una descripción detallada de la unidad,

consulte el “Manual de instrucciones” suministrado con el CD-ROM ( ) incluido.

What’s in the box

• Remotecontrolx1

• TypeAAAmanganesebatteriesx2

• Powercord

• Warrantycard

• SafetyBrochure

• OperatingInstructions(CD-ROM)

• QuickStartGuide(thisdocument)

Contenu de la boîte

• Télécommandex1

• PilesaumanganèsedetypeAAAx2

• Cordond’alimentation

• Cartedegarantie

• Instructionsdesécurité

• Moded’emploi(CD-ROM)

• Guiderapide(cedocument)

Überprüfen des mitgelieferten Zubehörs

• Fernbedienungx1

• Mangan-Mikrozelle(Größe„AAA“)x2

• Netzkabel

• Garantiekarte

• Sicherheitsbroschüre

• Bedienungsanleitung(CD-ROM)

• Kurzanleitung(diesesDokument)

CD-ROM

Contenuto della confezione

• Telecomandox1

• BatteriealmanganeseditipoAAAx2

• Cavodialimentazione

• Documentodigaranzia

• Istruzioniperlasicurezza

• Istruzioniperl’uso(CD-ROM)

• Guidadiavviorapido(questodocumento)

De inhoud van de verpakking controleren

• Afstandsbedieningx1

• AAA-typemangaanbatterijenx2

• Netsnoer

• Garantiebewijs

• Folderveiligheid

• Handleiding(CD-ROM)

• Snelstartgids(ditdocument)

Contenido de la caja

• Mandoadistanciax1

• PilasmanganesasdeltipoAAAx2

• Cabledealimentación

• Tarjetadegarantía

• Folletodeseguridad

• Manualdeinstrucciones(CD-ROM)

• Guíadeiniciorápido(estemanual)

2

Connections

Rear panel

Caution

• When making or changing connections, be sure to

turn off the power switch and disconnect the power cord

from its AC power outlet.

• Do not connect the power cord until all component and

device connections are completed.

USB

RL RL

AES/EBU OUT COAXIAL OUT OPTICAL OUT

Connections to components furnished with digital output.

Pre-main amplifier, etc., furnished

with balanced-type input connectors

Pre-main amplifier with RCA (pin plug)

input connectors

Power cord (accessory)

To AC outlet

AES/EBU input connector

This digital input supports AES/EBU

signals in PCM format (up to 192

kHz/24 bits).

Selector switch 1

Either set the analog output

connector’s output level to fixed (

FIX

),

or volume-linked (

VARIABLE

).

Selector switch 2

Use to switch the phase of the analog

output.

Note:

XLR and RCA signals are switched

together.

If a power amplifier is connected,

when selector switch 1 is set for

linked volume (

VARIABLE

), sound

volume can be controlled by the

unit.

Digital balanced

cable (110

Ω

)

Coaxial digital

cable (75

Ω

)

Optical digital

cable

USB cable

A type

DIGITAL IN connectors

These connectors support PCM format

signals (up to 192 kHz/24 bits).

Balanced cable

Computer with USB port

Note

• A dedicated driver may have to be installed in your

computer (see “Install the driver” of the operating

instructions).

USB input connector (B type)

Supports PCM format signals (to 384kHz/32 bits),

and DSD format (to 5.6 MHz).

Balanced output connector (appearance on unit

side; equivalent to XLR-3-31)

1 GND

2 HOT

3 COLD

2

1

3

ANALOG LINE OUT connectors

These two output connectors (RCA/

XLR) simultaneously generate signals

selected with the

INPUT

knob.

Signals are output when “LINE” is

selected with the

OUTPUT

knob.

3

Remote control

8

9

a

b

1

2

3

4

5

6

7

1



STANDBY/ON

Use to alternate power status between ON and

STANDBY modes.

2

MUTE button

During playback, press to temporarily mute the sound.

3

VOL +/− buttons

Press these buttons to raise/lower the sound volume.

4

Direct input selector buttons

Press one of the USB/COAX/OPT/AES EBU buttons to

select the desired source.

5

LOCK RANGE button

Press to adjust the DAC locking range.

Parts names and functions

6

DIRECT button

Press this button to output the input signal as is,

without passing through the DSP.

7

Hi-Bit 32 button

Press to change the Hi-Bit 32 setting.

8

DIMMER button

Press to adjust the display’s brightness.

9

FINE +/− buttons

Use to ﬁ nely adjust the headphone volume (this

adjustment affects only the headphone output).

a

DIGI FILTER button

Press to change the type of digital ﬁ lter used.

b

Up Sample button

Press to change the Up Sampling setting.

Basic operation

1 Turn power ON.

Press the front-panel



/I STANDBY/ON

button.

• The power indicator in the center of the button will

light.

2 Select the desired output connector.

Rotate the front-panel

OUTPUT

knob.

Set to LINE to select the analog output connector.

3 Select the desired input source.

Rotate the front-panel

INPUT

knob, or press the

corresponding

direct input selector

button on the

remote control.

• The selected input will appear in the display window.

• DSD data can be played only when using the USB

connection.

4 Operate the playback device.

For details, consult the operating instructions for your

playback device.

5 Adjust the sound volume.

Rotate the unit’s front-panel

VOLUME

knob, or use the

VOL +/−

buttons on the remote control.

Front panel

12 345678 9

ab c d

1



/I STANDBY/ON

Use to alternate power status between ON and

STANDBY modes.

When the unit’s power is ON, the power indicator in

the center of the button will light.

2

INPUT knob

Use to select the input source.

The selected source will appear in the display window.

3

DIRECT indicator

See “Direct setting” of the operating instructions.

4

Hi-Bit 32 indicator

See “Hi-Bit 32 setting” of the operating instructions.

5

Up Sampling indicator

See “Up Sampling setting” of the operating instructions.

6

LOCK RANGE ADJUST indicator

See “Adjust the DAC locking range” of the operating

instructions.

7

Display window

8

Remote control sensor

9

VOLUME knob

In order to control the sound volume of a component

connected to the unit’s analog output connector,

Selector switch 1

(on unit’s rear panel) must be set to

VARIABLE

.

a

PHONES GAIN knob

Use to adjust the headphones gain.

b

OUTPUT knob

Use to select the type of output, including LINE, and

PHONES 1 to PHONES 3.

c

Headphones connectors (PHONES 1, 2, 3)

Use to connect headphones.

d

FINE ADJUST knob

Use to ﬁ nely adjust the headphone volume (this

adjustment affects only the headphone output).

Page is loading ...

Pioneer U-05 User manual

Pioneer U-05 User manual

in other languages

Related papers

Other documents