Eurotech Zypad WR 11xx Owner's manual

d

Quick Reference Guide

Page is loading ...

Disclaimer

Eurotech reserves the right to make changes in specifications and other information

contained within this document without prior notice and the reader should in all cases

consult Eurotech to determine whether any such changes have been made. The

information in this publication does not represent a commitment on the part of

Eurotech.

Eurotech shall not be liable for technical or editorial errors or omissions contained

herein, nor for incidental or consequential damages resulting from the furnishing,

performance or use of this material.

This document contains proprietary information that is protected by copyright. All

rights are reserved. No part of this document may be photocopied, reproduced or

translated into other languages without prior written consent from Eurotech.

Rev. 1.1, March 2009; ETH_ZypadWR11XX_QRG11-2009-03

Websites: www.zypad.com

www.eurotech.com

P/N: 2400000005_S01_r1_1 WR11XX QUICK REFERENCE GUIDE

Trademarks

Zypad is a registered trademark of Eurotech S.p.A.

All other names or product names mentioned in this manual are the properties of their

respective companies and are hereby acknowledged.

4 ZYPAD WR11XX Quick Reference Guide

Conventions

The following table lists conventions that are used throughout this guide.

WARNINGS AND IMPORTANT NOTICES:

Warning:

Information to alert you to potential damage to a program, system or

device or potential personal injury

Information note:

Indicates important features or instructions to observe

TABLE OF CONTENTS

Disclaimer ................................................................................................................. 3

Trademarks ............................................................................................................... 3

Conventions .............................................................................................................. 4

TABLE OF CONTENTS................................................................................................5

PART 1 – IMPORTANT INFORMATION......................................................................7

ENGLISH - IMPORTANT USER INFORMATION..................................................... 8

Safety Notices and warnings

............................................................................ 8

RAEE

.............................................................................................................. 11

RoHS

.............................................................................................................. 11

ITALIANO - INFORMAZIONI IMPORTANTI PER L’UTILIZZATORE ..................... 12

Note sulla sicurezza e di avvertimento

........................................................... 12

RAEE

.............................................................................................................. 15

RoHS

.............................................................................................................. 15

FRANÇAIS - INFORMATION IMPORTANTE POUR L’UTILISATEUR .................. 16

Précautions et instructions de sécurité

........................................................... 16

Recyclage

....................................................................................................... 19

RoHS

.............................................................................................................. 19

DEUTSCH - WICHTIGE INFORMATIONEN FÜR ANWENDER ............................ 20

Sicherheits- und warnhinweise

....................................................................... 20

RAEE

.............................................................................................................. 23

RoHS

.............................................................................................................. 24

CHINESE 中文 – 致用户的重要信息 ....................................................................... 25

6 ZYPAD WR11XX Quick Reference Guide

安全注释和警告............................................................................................... 25

RAEE

.............................................................................................................. 28

RoHS

.............................................................................................................. 29

PART 2 – GETTING STARTED..................................................................................31

Product Overview.................................................................................................... 32

Chapter 1 Using the Zypad WR11XX for the first time ........................................35

Verify the package contents.................................................................................... 35

Managing the battery module and the add-on module............................................ 36

The battery module

......................................................................................... 36

The add-on module

......................................................................................... 36

Installing the battery and the add-on modules

................................................ 37

Removing the battery and the add-on modules

.............................................. 38

Charge the Battery with the AC adapter

......................................................... 40

Knowing the mounting bracelet............................................................................... 41

How to wear the bracelet

................................................................................ 41

Attach the main unit to the bracelet

................................................................43

Release the main unit from the bracelet

......................................................... 45

The stylus................................................................................................................ 46

Knowing the Buttons ............................................................................................... 47

Turning on the WR11XX for the first time under Linux............................................ 48

Screen Setup

.................................................................................................. 49

Date and Time

................................................................................................ 50

Chapter 2 Turning On/Off and Suspending the WR11XX....................................53

Turning on/off the WR11XX

............................................................................ 53

The suspend mode

......................................................................................... 53

Page is loading ...

ENGLISH - IMPORTANT USER INFORMATION

This Zypad WR11XX Quick Reference Guide is divided into two parts:

¾ The first part contains information relating to safety and environmental protection,

this is written in the languages of the Countries where the product is distributed.

¾ The second part contains a quick start guide; this is written only in English.

Before proceeding to the quick start guide, please read the following paragraphs:

Safety Notices and warnings

ENVIRONMENTAL COMPLIANCE

The Zypad WR11XX meets the following standard: MIL-STD-810F.

FCC INFORMATION AND COMPLIANCE

The Zypad WR11XX has been tested and found to meet the stated limits of a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against any harmful interference. The Zypad WR11XX

generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions contained within this manual, may cause harmful

interference to radio communications or to devices that are not appropriately shielded.

Eurotech is not responsible for any radio or device, which may be affected by harmful

interference. Appropriate shielding of susceptible devices is not the responsibility of

Eurotech. Furthermore, Eurotech is not responsible for unauthorized modifications of

Eurotech equipment including the substitution or attachment of cables and/or other

unauthorized equipment.

If electrical interference is harmfully affecting a device, it is the responsibility of the

user to take corrective measures to minimize the effect of the interference.

In order to minimize the affects of electrical interference, the use of shielded data

cables is advised.

In accordance with FCC 15.21, changes or modifications not expressly approved by

the party responsible for compliance could void the user’s authority to operate the

equipment.

ZYPAD WR11XX Quick Reference Guide 9

Tested for compliance with FCC Standards

Zypad WR11XX has been tested to, and complies with, part 15 of the FCC rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference

that may cause undesired operation.

Emissions information for Canada

This Class B digital apparatus complies with Canadian ICES-003. CET appareil

numérique de la classe B est conforme à la norme NMB-003 du Canada.

CE Marking:

This equipment is compliant to the requirements for CE marking

when used in residential, commercial, vehicular or light industrial

environments.

Note:

For the complete list of all the Regulatory and Safety Approvals

please refer to the documentation contained on the CD-ROM that

comes with your Zypad WR11XX.

USE WITH CARE

Do not use your Zypad WR11XX while driving a vehicle. If you must use your Zypad

WR11XX, first park the vehicle. Always secure your Zypad WR11XX while driving; do

not place your Zypad WR11XX on the passenger seat or where it can break loose in a

collision or sudden stop. For vehicles equipped with an airbag, remember that an

airbag inflates with great force. Do not place your Zypad WR11XX in the area over the

airbag or in the airbag deployment area.

Use of the Zypad WR11XX device for navigation (using the optional in-car holder) still

means that you need to drive with due care and attention.

10 ZYPAD WR11XX Quick Reference Guide

BATTERY

Warning:

Only use the Li-Ion battery pack provided by eurotech.

The use of any other battery pack not sold/manufactured by Eurotech

in the Zypad WR11XX will void your warranty and may result in

damage to the Zypad WR11XX wearable computer.

IT08020000000680

Battery product safety

The Lithium-Ion battery pack contained in the product must be

recycled or disposed of properly.

Use only the AC adapter that is provided / recommended by

Eurotech.

Lithium-Ion battery packs may get hot, ignite, explode and / or cause serious injury if

used in an inappropriate way.

Please follow these safety warnings:

¾ Do not expose the battery pack to fire.

¾ Do not heat the battery pack.

¾ Do not reverse the polarity of the battery pack.

¾ Do not short the terminals of the battery pack.

¾ Do not carry or store battery pack together with metal objects.

¾ Do not pierce, strike or in any way expose the battery pack to strong impacts or

shocks.

¾ Do not solder directly onto the battery pack.

¾ Do not expose the battery pack to liquid, or allow the contacts to get wet.

¾ Do not disassemble or modify the battery pack: The battery pack contains safety

and protection devices, which, if damaged, may cause the battery pack to

generate heat, ignite or explode.

¾ Do not discharge the battery pack using any device except those that are

specified. When used in devices other than those specified, the battery pack can

be damaged and its life expectancy reduced. If the device causes any abnormal

current to flow, it may cause the battery pack to become hot, ignite or explode

and can cause serious injury.

¾ In the event that the battery pack leaks and the fluid gets into eyes, do not rub

the eye. Rinse well with water and immediately seek medical attention. If left

untreated, the battery fluid may cause permanent damage to the eyes.

¾ To avoid damaging your Zypad WR11XX or the AC Adapter, be sure all

connectors are properly aligned before installation.

ZYPAD WR11XX Quick Reference Guide 11

RAEE

The information below is issued in compliance with the regulations as set out by the

2002/96/CE directive, subsequently superseded by 2003/108/CE, and refers electrical

and electronic equipment and the management of their waste (WEEE)

When disposing of a device, including all of its components, subassemblies and

materials that are an integral part of the product, you should take the WEEE

directive into consideration.

IT08020000000680

This symbol has been attached to the equipment or, in the case that

this is not possible, on the packaging, instruction literature and/or

the guarantee sheet. The use of this symbol states that the device

has been marketed after August 13th 2005, and implies that you

must separate all of its components when possible, and dispose of

them in accordance with local waste disposal legislations.

¾ Because of the substances present in the equipment, improper use or disposal can cause

damage to human health and the environment.

¾ With reference to RAEE, it is compulsory to not dispose of the equipment with normal urban

refuse; arrangements should be made for separate collection and disposal.

¾ For more detailed information about the recycling of RAEE, please contact your

local waste collection body.

¾ In case of illicit disposal, sanctions will be levied on transgressors.

RoHS

This device, including all it components, subassemblies and the consumable

materials that are an integral part of the product, has been manufactured in

compliance with the European directive 2002/95/CE known as the RoHS directive

(Restrictions on the use of certain Hazardous Substances), this directive targets the

reduction of certain hazardous substances previously used in electrical and electronic

equipment (EEE).

Page is loading ...

ZYPAD WR11XX Quick Reference Guide 29

RoHS

此设备以及其所包含的所有元器件和耗材都在欧洲管理规范2002/95/EC，

即RoHS规范（Restrictions of Hazardous Substances）的严格规定下生产。

该规范对曾经普遍使用在电气和电子设备（EEE）中的一些有害物质作出了严格限

制。

Page is loading ...

32 ZYPAD WR11XX Quick Reference Guide

Product Overview

Integrated Speaker

Audio Adapter Connector

Power/USB ports

Adapter Connector

Mounting Bracelet

Release Buttons

Function Keys

Stylus

Stylus Holders

Power ON/OFF Button

Mode Selector

Alert Button

Expansion Modules

(Battery Module and

Add-on Module)

Cursor Pad

Enter/Confirm Button

Esc/Cancel Button

TFT Touchscreen Display

ZYPAD WR11XX Quick Reference Guide 33

Integrated

Alarm LED

WLAN LED

BT LED

Function Keys

Microphone

F1

Enter/Confirm Button

F2

Integrated

Speaker

Cursor Pad

F3

Esc/Cancel Button

F4

Charge LED

Luminosiot

y

Power LED

Sensor

Page is loading ...

Chapter 1 Using the Zypad WR11XX for the first time

Following is a list of operations that should be done before using your Zypad WR11XX

for the first time:

Step 1. Verify the package contents

Step 2. Managing the battery module and the wireless module

Step 3. Knowing the mounting bracelet, stylus and buttons

Step 4. Turning on the Zypad WR11XX for the first time

Step 5. Performing the screen setup

Step 6. Setting Time and Date

Verify the package contents

Verify that the package contains the following items:

• One Zypad WR11XX device that includes:

o The main unit

o One mounting bracelet

o Two Stylus

• One battery module (3.6V Li-Ion)

• One wireless module (Standard/WWAN/GPS/WWAN + GPS/RFID)

• One audio cable

• One multifunction cable (for USB Master and Slave + power)

• One CD-ROM (containing manual and user software)

• One copy of this Zypad WR11XX Quick Start Guide

Be sure to keep the original packaging, this will be useful in the unlikely event that the

Zypad WR11XX needs to be returned for service.

36 ZYPAD WR11XX Quick Reference Guide

Managing the battery module and the add-on module

The WR11XX is shipped with a rechargeable Li-Ion battery module and an add-on

module mounted on the external expansion slots, these are interchangeable.

The battery module

The rechargeable Li-Ion battery module allows, in certain conditions, more than 4

hours of operation. This is an average value that depends on the use of the product:

intensive radio communications may reduce the operating time; we suggest having at

least one spare battery pack available.

Please note that the battery pack is discharged when delivered and therefore needs to

be charged before first use.

It is recommended that you fully charge the battery before setting up

the WR11XX for the first time.

The add-on module

The module, depending on the model purchased, can integrate one of the following

features:

• Standard

• WWAN

• GPS

• WWAN + GPS

• RFID

If the add-on module integrates the GPS feature it is recommended to

mount the module on the external expansion slot that is farthest from

the user’s body.

ZYPAD WR11XX Quick Reference Guide 37

Installing the battery and the add-on modules

The battery and add-on modules (also called expansion modules) have to be

connected in their respective external expansion slots on the bottom side of your

WR11XX.

Follow these steps to install the expansion modules:

1. Place the WR11XX horizontally with the external expansion slots facing up

2. Insert the first expansion slot insuring it is correctly positioned (A)

3. Insert the locking tab into the locking hole (B) and latch the locking tab (C)

A

C

B

External Expansion Slots

38 ZYPAD WR11XX Quick Reference Guide

4. Repeat steps 2 and 3 for the other expansion module

Removing the battery and the add-on modules

To remove the battery and/or add-on modules reverse the previous instructions:

1. Unlatch the locking tab (A)

2. Remove the first module (B and C)

A

B

C

B

A

ZYPAD WR11XX Quick Reference Guide 39

3. Repeat steps 1 and 2 for the other module

The battery module is hot swappable.

A

B

C

40 ZYPAD WR11XX Quick Reference Guide

Charge the Battery with the AC adapter

The AC adapter that comes with your WR11XX works in a standard electrical outlet

and allows for correct charging of the Li-Ion battery pack.

This is done to maximize battery life.

To charge your WR11XX battery pack using the AC Adapter:

1. Insert the AC cord into the AC Adapter

2. Insert the AC Adapter plug into the power supply port under the protective

cap

3. Insert the AC cord into an electrical outlet

4. Power and Charge LEDs will turn on.

Do not wear your WR11XX while charging the battery.

ZYPAD WR11XX Quick Reference Guide 41

Knowing the mounting bracelet

The WR11XX comes mounted on a special high-resistant bracelet, provided with two

heavy-duty plastic quick release buckles. It allows for easy, flexible and ergonomic

positioning on the arm (even over clothes).

This also ensures ideal weight distribution and maximum comfort.

The figure below shows the bracelet released from the main unit.

How to wear the bracelet

1. Release the two buckles

2. Place the WR11XX onto your wrist (the two releasing buttons should face

the elbow)

3. Attach the quick release buckles and adjust the belts to guarantee secure

positioning on the wrist

4. To remove the bracelet, just detach the buckles.

The figure below shows the correct positioning of the bracelet on the left and right

wrists and how to attach the quick release buckles.

42 ZYPAD WR11XX Quick Reference Guide

Information note:

The WR11XX default configuration is for right-handed users, who

wear it on the left arm.

If the user is left-handed he can wear the WR11XX on the right arm

paying attention that the two releasing buttons face the elbow.

The display has to be rotated of 180° via software: refer to the

WR11XX_Manual for further information.

Page is loading ...

Eurotech Zypad WR 11xx Owner's manual

Eurotech Zypad WR 11xx Owner's manual

in other languages

Related papers

Other documents