Maxboost MB000398 User guide

  • Hello! I am an AI chatbot trained to assist you with the Maxboost MB000398 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
DURASLIM FACE SHIELD
DURASLIM FACE SHIELD
How To Wear
Step 1: Wrap the elastic band around the back of
your head. The band should wrap about 0.5-1 inch
above your ears and eyebrows.
Step 2: Adjust the visor so it is centered
and wraps around the majority of your face.
How To Reuse
Wash in warm or
cold water ONLY.
Use non-corrosive
detergent ONLY.
Use non-scrubbing
soft cloth ONLY.
Spraying with alcohol
to sanitize is OK.
The Maxboost Face Shield can be cleaned, sanitized, and reused under proper conditions.
Follow these steps for general washing, cleaning, and reuse:
Maxboost Face Shield
For Storage and Cleaning:
AVOID all high temperatures and direct sunlight.
DO NOT place or use under high temperatures or direct sunlight.
If storing inside a car, DO NOT place on the dashboard.
Clean the product before storing it away.
DO NOT iron/steam iron the product.
DO NOT tumble dry the product.
DO NOT use the product in a steam room.
NEVER machine wash the product.
**NOTE: The Maxboost Face Shield can withstand temperatures of up to 176 °F but it is
recommended to not use the product under extreme temperatures.
0.5-1 inch
0.5-1 inch
1
2
3
4
5
6
27
26
25
24
23
22
21
20
Maxboost Face Shield
How To Measure For Fitting
Choosing the correct size of face shield is essential for overall comfort and
protection. To ensure the best t, please remember to measure BEFORE you
purchase.
Maxboost offers face shields in the size shown below. Use the following
process in order to properly nd your measurements to ensure the face shield
will FIT you.
How To Measure Your Head
0.5"-1"
Above Your
Eyebrows
Just Above
Your Ears
Step 1: Use a exible measuring tape to
measure the circumference of your head
about 0.5-1 inch above your eyebrows
and ears.
(NOTE: Use a STRING if you don’t have
measuring tape.)
Step 2: If a string was used, lay it down
on a at surface and measure it with a
tape measure.
Step 3: Measure multiple times and use
the largest measurement to choose your
size.
IMPORTANT: The band that wraps around the head is around 22.5 inches. For the majority of
users, if your head measures the circumference of 22.5 - 25.5 inches, the Maxboost Face
Shield will FIT you.
**IMPORTANT: The product is NOT designed for medical use.
/