Magnadyne MC-PRO-OAK Installation guide

Brand: Magnadyne

Model: MC-PRO-OAK

Type: Installation guide

FRONT

Service Card- Initial Setup

Multi-Charger Pro Universal Charging Station

Size: W: 5.5” x H: 8.75”

Black Type

White Background

Back-Up Battery

LED power indicator

Clock

Positive (+)

Side Up

Turning the Clock On/Off:

Press the power button to turn the Clock On/Off.

You will see the Digital Clock Display turn on.

Adjusting Minutes:

1. Press and hold button for 3 seconds until

minutes

FLASH.

2. Press button again to adjust minutes.

Connecting the Power Supply

Plug the power supply connector into the Multi-Charger Pro Universal Charging Station. Plug the

power supply into the wall socket. The green LED power indicator will now be lit.

Note: Maximum Input 5V/1A.

Installing the Back-up Battery

1. Remove the Back-up Battery cap.

2. Insert the battery paying attention to the

- and + indicators on the battery.

3. Reinstall the battery cap.

Clock

Adjusting Hours:

1. Press and hold button for 3 seconds until

hour numbers

FLASH.

2. Press button again to adjust hours.

12:00

Drawing Number

Part Number

Description:

Description RevDateAppr

R

Drawn

GG

3-23-09

Sheet

1 of 2

Project Number

0961

Service Card for

MC-PRO-XXX Universal

Charging Station

MC-PRO-XXX

03230903

This drawing and the

information in it are the

property of Magnadyne

Corporation and cannot

without prior written

permission be reproduced,

copied, or disclosed in any

manner.

Initial Release

A

BY

Service Card- Initial Setup

Drawing Number

Part Number

Description:

R

Drawn

GG

Sheet

2 of 2

Project Number

0961

Service Card for

MC-PRO-XXX Universal

Charging Station

MC-PRO-XXX

03230903

This drawing and the

information in it are the

property of Magnadyne

Corporation and cannot

without prior written

permission be reproduced,

copied, or disclosed in any

manner.

© Copyright 2009

Magnadyne Corporation

MC-PRO-UM/IM

Rev. A 2-23-09

USB Port

*USB cable

not provided

*

BACK

Multi-Charger Pro Universal Charging Station

Connectors:

Step 3

Plug-in the device or devices

to charge.

Note: If both device’s batteries are

fully drained, intially connect and

charge only one device. After

20-30 minutes the second device

can be connected and charged.

Step 2

Feed the plugs through the lid.

Note: Maximum 2 plugs.

Step 1

Locate desired plug or plugs.

If your phone’s charging cable

uses a standard USB connector,

use the USB port provided.

10 Connectors + 1 USB Port

- iPod / iPhone

- LG

- Micro USB / Various Brands

- Mini USB / Various Brands

- Samsung - 2

- Samsung - 1

- Sony Ericsson

- Treo

- Nokia Small Barrel

- SCI Barrel Sprint/Verizon

Service Card- Initial Setup

Drawing Number

Part Number

Description:

R

Drawn

GG

Sheet

2 of 2

Project Number

0961

Service Card for

MC-PRO-XXX Universal

Charging Station

MC-PRO-XXX

03230903

This drawing and the

information in it are the

property of Magnadyne

Corporation and cannot

without prior written

permission be reproduced,

copied, or disclosed in any

manner.

1
2

Magnadyne MC-PRO-OAK Installation guide

Brand: Magnadyne

Model: MC-PRO-OAK

Type: Installation guide

Other documents