Matsui 1409R Quick Start Manual & Instructions

Brand: Matsui

Model: 1409R

Type: Quick Start Manual & Instructions

Matsui 1409R

Below you will find brief product information for Matsui 1409R. This guide will give you an overview of the capabilities of your newly purchased device and provide you with some ideas for its potential use cases.

The Matsui 1409R is a television set that offers a range of features to enhance your viewing experience. With its built-in digital tuner, you can enjoy crystal-clear reception of your favorite channels. The TV also features a variety of picture settings, allowing you to customize the display to your liking. Additionally, the Matsui 1409R has a sleep function that allows you to automatically turn off the TV after a preset amount of time.

Matsui 1409R

Inserting batteries into the Remote

Control

Quick start

Guide

Instructions

If you do not have an external aerial,

connect the loop aerial

(supplied)

to the

aerial socket.

Matsui 1409R

Interference – Do not place your

television near appliances which may

cause electromagnetic interference

(i.e. HI-FI speakers). If you do, it may

adversely affect the working of the

unit, causing the picture or sound to

distort.

Covers – Do not remove any fixed

covers as this may expose dangerous

voltages.

Weather – It is advisable to unplug

the aerial during a thunderstorm. Even

if your television is switched off, it can

still be damaged if lightning strikes the

mains and/or aerial cables.

Ventilation – The ventilation holes

on the casing of your television

prevent it from overheating. Do not

block or cover these holes - especially

with cloth or paper. If your television is

to be built into a compartment or

similarly enclosed, make sure that

there is at least a gap of 10cm on

both sides and 20cm at the top and

back.

Damage – Never use your television

if it is damaged in any way. Always

place your television on a flat level

surface avoiding anywhere which

may be subject to strong vibration.

Batteries – Batteries are easily

swallowed by young children. Do not

allow young children to play with the

remote control unit.

Temperature – Avoid extremes of

temperature, either hot or cold, place

your television well away from heat

sources such as radiators or

gas/electric fires. Do not place

candles or table lamps on or near

your TV.

Moisture – Do not allow your

television to be exposed to rain,

moisture or dust. Do not place a plant

or flowers which may need watering

on your TV. If any liquid is spilt into

your television it can cause serious

damage. If you spill any liquid into

your television switch it off at the

mains immediately and contact your

store. When cleaning your TV we

recommend that you do not spray

cleaning fluid directly onto the TV

screen.

Your television is supplied with an approved 13AMP fused mains plug. When

replacing the fuse always use a 5AMP (BS 1362) approved type. To obtain a

replacement fuse contact your store. If the mains sockets in your home differ or

are not suitable for the type of plug supplied, then the plug should be cut from

the mains lead and a suitable type fitted. You must use a 13 AMP plug (BS

1363) and fit a 5 AMP fuse (BS 1362). If any other type of plug is used a 5

AMP fuse must be fitted, either in the plug, adaptor or at the distribution board.

Please refer to the wiring instructions.

All connections must be made with the power disconnected.

If you have an external aerial

(not supplied

)

connect it to the aerial socket on the back of the

TV. An external aerial will give the best picture.

Connect an aerial lead

(not supplied

) to the socket marked

RF IN on the back of your VCR.

Connect an RF lead to the socket marked RF OUT on your

VCR and the other end to the aerial socket on your TV.

If you have a scart lead we recommend that you use one.

Connect it to the scart socket on the back of your TV and

one of the scart sockets on the back of your VCR.

Switch on your TV and any

other connected equipment

Adjusting the picture settings

Setting the sleep function

The sleep function allows you to automatically switch your

television into standby after a preset amount of time (up to

120 minutes). In addition should you fall asleep or leave your

TV unattended it will automatically switch into standby 15

minutes after the end of transmissions.

To set the sleep timer press SLEEP.

SLEEP 120 will appear on screen.

The display will clear in five seconds and your television

will switch off automatically after 120 minutes.

Repeated presses of SLEEP will decrease the sleep timer

in 10 minute intervals from 120 minutes to 10 minutes.

1st press 120 minutes.

2nd press 110 minutes.

. . .etc. . . . 100, 90, 80.

When you have set the sleep timer your TV will return to

a normal picture and automatically switch off after the

preset sleep time.

To cancel the sleep timer set the sleep timer to 0.

The display will clear in five seconds and your television

will not switch off automatically.

Make sure that your TV and aerial are properly

connected.

Plug your TV and any other equipment that you have

connected to your TV into the mains and switch on at

the wall.

Press the POWER switch on the front of the TV, the red

standby indicator will light.

Switch on your television by pressing STANDBY on the

remote control. (

The standby light will go out when the

TV is on.)

Select your language

Tune the channels

Sort the channels

The picture settings have been adjusted by the factory under

optimum signal reception conditions, however conditions may

not be the same in your area. After turning on your television,

allow it to warm up for a few minutes before making any

adjustments. Should you wish to reset picture controls back to

factory settings press NORMAL

Press MENU on your remote control.

The on screen

display will appear.

Press PROG/PAGE/on your remote control to

highlight picture (indicated by a flashing green square).

Press ENTER to view brightness, contrast, colour or

sharpness on screen displays.

Press VOL + or - to adjust the levels.

Pictures appear sharpest in the daytime by increasing

the contrast. In the evening (when surroundings are

darker) the sharpest picture can be obtained by

reducing the contrast.

Press MENU twice to remove the picture menu.

If you do not make an adjustment within 1 minute the menu

will disappear.

Press MENU.

The main control menu will appear.

Press PROG/PAGE/on your remote control to highlight

CH tuning (indicated by a flashing green square).

Press ENTER. Th

e CH tuning on screen display will appear.

Press the PROG/PAGE/ on your remote control to

highlight CH allocation (indicated by a flashing green square).

Press ENTER.

The CH allocation on-screen display will appear.

The current position for the channel on the TV screen will flash

on the top right corner of the screen.

Press ENTER once so that

the CH ALLOCATION number flashes in the on-screen display.

Press PROG/PAGE/to select the programme number

that you want this channel to be stored in.

For example if the TV

has automatically stored a BBC2 programme in channel number

6, you will need to press ENTER once and change the channel

allocation number using

PROG/PAGE





to 2.

(If no channel is allocated, the on screen display will disappear

after 1 minute.)

Press MENU three times to remove the tuning menu from the

screen. The channel will now have changed position.

Press MENU on your remote control. The main control menu

will appear on your TV screen.

Press PROG/PAGE/on your remote control to highlight

CH tuning (indicated by a flashing green square). Press ENTER

to confirm.

The CH tuning on-screen display will appear.

Press PROG/PAGE/ to highlight auto. Press ENTER to

confirm.

This will start the automatic tuning process.

This process will take a few minutes to complete. . .

please be patient.

When the programme on the screen stops changing and the

sound comes on, the tuning process is complete.

Press MENU twice to clear the display.

Since each programme may be picked up by your TV on more

than one frequency the auto tune process will probably store

more than one of each channel. For example there may be

three BBC 2’s. This means that once the automatic tuning

process is complete you will need to allocate a channel number

to the programmes with the clearest reception. To do this go to

the next step - Sorting Channels...

This feature allows you to select the language you want

to appear on your TV on-screen display.

Press MENU on the remote control. The main control

menu will appear on your TV screen.

Press PROG/PAGE /to select Language menu.

Press ENTER to select Language screen.

Press PROG/PAGE / to select desired language.

Press ENTER to store your setting.

Press MENU to clear the screen.

Connect your TV to an aerial

Connect your TV to an aerial and VCR

Connect the aerial

If you have a VCR connected make sure that it is

switched on and a video tape is playing. . . your TV

screen will be fuzzy.

If you have a Satellite/Cable box system or games

console connected make sure that it is switched on.

Make sure your Satellite/Cable box has Sky News

selected. . . your TV screen will be fuzzy. Please refer to

your Satellite/Cable instruction book to see how to

select Sky News.

Fault finding guide

Wiring Instructions & Specification

Warning: If the mains plug is cut from the mains lead of this appliance the plug must be destroyed. A mains

plug with bared wires is hazardous if engaged in a mains output socket.

The wires in your TV mains lead are coloured in accordance with the following:

••

•• The wire which is coloured Blue must be connected to the terminal in the plug marked ‘N’.

••

•• The wire which is coloured Brown must be connected to the terminal in the plug marked ‘L’.

••

•• No connection must be made to the earth terminal of the plug.

••

•• You must use a 13 amp plug (BS 1363), and fit a 5 amp fuse (BS 1362).

••

•• If any other type of plug is used a 5 amp fuse must be fitted, either in the plug, adaptor or at the

distribution board.

Picture tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14” (32 cm visible) measured diagonally

Colour system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAL I

Aerial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Loop aerial or 75 Ohm external aerial

Scart socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 x 21 pin

Audio output power . . . . . . . . . . . . . . . . . . . . . . . . . .1.5W

Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3”(8 cm) 8Ohms

Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AC 230-240 50Hz

Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . .44W (10W in standby)

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9.5Kg

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .362(W) x 360(D) x 320(H)mm

Setting your security code

abc

Manual Tuning

Select the TV channel you want to manually tune.

Press MENU on your remote control. The main control

menu will appear.

Press PROG/PAGE / on your remote control to

highlight CH tuning (indicated by a flashing green

square).

Press ENTER on your remote control to confirm.

The CH tuning on screen display will appear.

Press PROG/PAGE / to highlight manual.

Press ENTER to confirm.

In an effort to fight crime, we have equipped your TV

with security protection. When activated your TV is

protected against unauthorised use. You cannot

operate the unit if you forget the PIN code. Please

ensure that you keep a record of the PIN code in a

safe place, in case you forget it.

If the unit needs to be serviced, make sure that the

security protect function is OFF, otherwise you will be

charged for resetting this feature.

If you enter the wrong PIN code more than 3 times, the

unit will be locked and you will not be able to operate

your TV. To unlock the unit you must disconnect the

mains supply and wait for more than 30 minutes.

Reconnecting the mains supply after this time will allow

you to enter the PIN code again.

No standby light.

No picture, no sound.

Unable to select channel

numbers up to 80.

Poor or no colour.

Remote control does not

work or operates

erratically.

Unable to playback video

tapes.

Unable to watch Satellite

stations.

Is your TV plugged in ?

Is the main power switch on the

front of your TV off?

Has the fuse in the mains plug

blown?

Is your TV plugged in ?

Is the aerial connection lead

broken or damaged?

Possibly station trouble.

Is the main power switch on the

front of your TV off?

Have you pressed Mute or have

you set the volume at minimum.

During automatic tuning your

television didn’t find enough

channels to place in these

numbered positions?

Aerial or connection lead is not

connected or lead is damaged or

broken.

Colour control is not adjusted.

Weak or exhausted batteries.

During automatic tuning your

television you didn’t have your

VCR switched on, therefore your

television was unable to find it.

During automatic tuning your

television didn’t find the Satellite

system.

Plug your TV into mains socket

(AC outlet).

Press the main power switch.

Replace fuse in mains plug.

Plug your TV into mains socket

(AC outlet).

Check all aerial connections for

broken or damaged wires. If

necessary replace with new leads.

Move the aerial away from

possible source of interference. If

you live in a known poor

reception area try using an aerial

booster to improve the quality of

broadcast signal.

Press the main power switch.

Press Mute again or increase the

volume using the volume control.

If a television station has been

missed try repeating the automatic

tuning.

Check all aerial connections for

broken or damaged wires. If

necessary replace with new leads.

Try using an aerial booster to

improve the quality of broadcast

signal.

Adjust colour.

Replace batteries.

Before starting the automatic

tuning operation make sure you

have your VCR switched on and a

tape playing.

Before starting the automatic

tuning operation make sure you

have your Satellite system

switched on and Sky News

selected.

SYMPTOM

CAUSE SOLUTION

Press PROG/PAGE / to select PIN code.

Then press ENTER.

Press numbered buttons on the remote control to enter

the PIN code (4 digits).

Your PIN code can be a combination of any 4 numbers.

Press ENTER to register the PIN code.

Press PROG/PAGE / to select the protect on off

menu.

Then press ENTER to select ON. Press MENU to return

to the main menu.

The security protect function will now be activated.

3J20101A V ‘00.07

Press MENU on the remote control.

The main control menu will appear.

Press PROG/PAGE / to select the pin code

registration menu.

Press ENTER to display the pin code registration screen.

Press PROG/PAGE / to select owner's name.

Then press ENTER. Press VOL +/- until the desired

letter is displayed.

Store the letter by pressing ENTER.

You can enter up to 20 letters.

Press MENU to register your name.

To cancel the security protect function select "protect

OFF" from the PIN CODE REGISTRATION menu.

If you turn off the MAIN POWER switch on the front of

the unit or the unit is unplugged from the mains supply

for more than 30 minutes, the PIN code screen will

appear on the screen when you next turn on the unit.

Enter your PIN code using the numbered buttons on the

remote control.

If you enter the correct PIN code, "PIN CODE OK" will

be displayed on the screen and you will be able to

operate the unit.

If you enter the wrong PIN code, "PIN CODE ERROR"

will be displayed on the screen, and you can try again.

Press VOL + to search up the waveband or VOL – to

search down the waveband.

Each time a station is found the search will stop.

Press VOL + or – to continue searching until the station

you want is found.

Press ENTER to store the station you selected.

Press PROG/PAGE / to select your required

channel number (1~80).

Press ENTER to store the channel number.

Repeat this process to tune in other channels.

Press MENU three times to remove the tuning menu.

If at a later date you wish to skip an unwanted channel

when using PROG/PAGE / , press SKIP on the

remote control.

The channel number will flash when skip is selected for

that channel.

To cancel the skip function, type in the channel number

i.e. 2 and press SKIP.

The channel number will stop flashing.

abc

In certain areas with poor reception, the Automatic

Tuning System may not tune your television to the

strongest broadcast signal. If you are not satisfied with

the automatic tuning you may manually tune your

television to obtain the best possible picture and sound.

Matsui 1409R Quick Start Manual & Instructions

Brand: Matsui

Model: 1409R

Type: Quick Start Manual & Instructions

Matsui 1409R

Download PDF

report

Matsui 1409R Quick Start Manual & Instructions

Matsui 1409R Quick Start Manual & Instructions

Related papers

Other documents