Escene IV750 Quick operation guide

Category
Door intercom systems
Type
Quick operation guide
IP 门讲 IS/IV750
ESCENE IPESCENE IP
ESCENE IP广便
IP
出厂IPIPIP192.168.1.100
192.168.1.1WEB访码均root。为
络问读配备接
设备关,IP3
厂值后,删除
http://192.168.1.100/user.asp 管理
http://192.168.1.100/home.asp 级管
单:
线
1
1
1
1
2
1
值IP地址:
SIP 帐置:
或高可设SIP务器
用户SIP设置
理页SIP帐号置>帐1
使该按相关确且使
WEB置如级管
>可键>热线
DSS键介:
备有出和,继可以DSS、逻器控DTMF
易管管理下图
出口
1 2
控制
DTMF
DSS可触
入接12
使API命令该设
联系文档
过程设备
DTMF密码
触发
使用继电
门控
计时
1
出/输
广亿景公司
址: 广市天51C
站: http://www.escene.cn
Output 1 Output 2 警灯
Intput 1
or
Intput 2
动传or急按
式:
号 - 在快,可是否
即发
讲 - 在讲模IP能,
实现
称&号码 - 可填入号码
Output 1
NO1 NC1
Input 1 Input 2 Output 2
NO1 NC1
COM1 COM2
DSS
IP Intercom Doorphone IS/IV750
Quick Reference Guide
hank you for purchasing ESCENE IP Intercom doorphone. All of ESCENE IP Intercom doorphone
products have been tested strictly before shipping. ESCENE IP Intercom doorphone is widely
used in office, school,airport, etc. In order to facilitate installing, modulation and running. Please
read this manual carefully before setting.
IP Doorphone Topological Graph
This equipment's factory IP address is using static
IP(e.g.http://192.168.1.100, Gate way: 192.168.1.1), the
default user name: root, password: root. In order to avoid
network problem, please carefully adjust, then install the
equipment under the network environment.
Note: the main control board has a light touch key which could
be long pressed after 20 seconds to reset the factory defaults,
then the original configuration will be deleted.
http://192.168.1.100/user.asp is easy web management.
http://192.168.1.100/home.asp is all-round web management.
Packing List:
Doorphone
Quick Installation
Guide
Installation Guide
Mounting Dimensions
Map
Connector
Screw and tool
1
1
1
1
2
1 Packet
List
Quantity
Factory IP Address:
Add SIP Account:
Easy or All-round web management can setting the SIP
server address,port,user name,password and SIP user
with assigned SIP account parameters.
All-round web management:
Current location : SIP Account > Account 1
Before using this key, please ensure that the related
configuration is correct and can be used. Login the
equipment webpage to configure (All-round WEB
Management > Programmable Keys > Memory Keys).
DSS KEY FUNCTION USAGE:
The device has two of RELAY OUTPUT and LOGICAL INPUT interface. The RELAY OUTPUT interface can
be under control for DSS Key/Logical Input/Server Control/DTMF.
Login Easy web management or All-round web
management, as shown in the figure below. The
output port settings:
Press Key
Input1 or 2
Ser Control
DTMF NO.
Open Door NO.
Short Circuit Time
Press the dial button to trigger the relay.
Shortcut the input1 logic to trigger the
relay.
Use API command to trigger the relay.
Ask us for develop manual please.
Pressing DTMF key to trigger the relay
when the phone talking.
Setting and use this Open Door Number
can open the door.
The relay circuit timer.
Output1
Two Short Circuits Output
Configuration Method
ESCENE COMMUNICATION CO.,LTD.
Address: Floor 4 Building C YueAn Industrial Park No.51Huangcun
Road Tianhe District Guangzhou China
Web: http://www.escene.cn/en/
Output 1 Eletric Lock
Output 2
Alarm Light
Intput 1
Door Magnetic Switch or Infrared Sensor
Intput 2
Vibration Sensor or Emergency Key
Mode:
Speed Dial - In Speed dial mode can define whether
this call is allowed tobe hang up by re-press the speed
dial.
Intercom - In Intercom mode, if the callers IP phone
support intercom feature, can realize auto answer.
Name & Number - Fill the called party’s Name and SIP
account or address.
Easy web management
Two Short Circuits Output & Input Example Figure
Output 1
NO1 NC1
Input 1 Input 2 Output 2
NO1 NC1
COM1 COM2
DSS Key
Mic
Camera
Speaker
  • Page 1 1
  • Page 2 2

Escene IV750 Quick operation guide

Category
Door intercom systems
Type
Quick operation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages