Avue AVHD830IR User manual

  • Hello! I am an AI chatbot trained to assist you with the Avue AVHD830IR User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
02. 2
02. 1
Rotate the lens horizontally and vertically to adjust the angle.
Loosen all 4 screws and remove the cover.
INSTALLATION
02. 3
2 3 4
SPECIFICATION
01
Video Output Mode
Image Sensor
Image Resoluon
Eecve Pixels
TV System
Electronic Shuer
S/N Ra
Scanning System
Focus Length
Focus Control
Lens Type
Pixels
Infrared LED
Infrared Distance
Starlight
IR Power On
Day/Night

White Balance
Gain Control
Noise Reducon
Picture Adjustment
WDR
OSD Support
UTC
Housing
IR Cut Filter
Operaon Temperature
Storage Temperature
Power Source
Dimension
Weight 2.6 LB
-10 ~ +50 RH95% Max
-20 ~ +60 RH95% Max
DC12V±10%, 550mA
5.6x 5.6 Inch
YES
Metal, IP66
YES
YES
YES
YES
YES
AUTO / MANUAL
AUTO
3DNR
Smart IR control
YES
42µ x 4PCS
100 Feet
YES
Manual
Varifocal
2M Pixels
50dB
Progressive Scan
2.8-12mm
2MP 1080P/960H
1920*1080
PAL/NTSC
1/25s~1/50,000s , 1/30s~1/60,000s
CameraLensNight VisionCamera Features
General
1/2.8" SONY Starvis Back-illuminated CMOS Sensor
02
AVHD830IR
AHD/CVI/TVI/CVBS - HD-SDI/EX-SDI 6 IN 1
Remove the rubber plug and untighten the side screws to
detach the base from the house.
02. 4
Attach the base to the wall or ceiling with 4 screws.
The factory default is the best angle, if you need to adjust:
6 IN 1 HD Dome Camera
User Manual
02. 5
Slide the house’s notch into the base, then tighten the screws
to fix the camera to the wall or ceiling.
Features:
You have three options to record or view your video.
1. Connect the camera video out to your DVR video in.
2. Connect the camera video out to AVUE CCTV monitor
(for example: AVG22QHD-3D).
3. Connect the camera video to TV or other HDMI Monitor through
the AVUE TVI/CVI/AHD to HDMI Converter (for example: TVH-L11).
Package includes:
6
Plug in black port to your DVR for HD-SDI/EX-SDI mode, yellow for
HD- TVI/CVBS/AHD/CVI, and red for power .
1. Yellow plug’s default mode is CVBS (SD). If you want to change the
output, press left button 3 seconds for AHD signal, press right button
3 seconds for TVI signal, press down button 3 seconds for CVI signal.
2. Black plug’s default is HD-SDI, to switch to EX-SDI move left button
three times then press center button. To switch back to HD-SDI, move
right button three times then press center button.
4. Press the SET button to access Main Menu, use the button to enter
a menu or to select a menu option. Use the UP and DOWN buttons
to move vertically between menu and use LEFT and RIGHT to move
horizontally.
5 1
OPERATION
03
03. 2
03. 1
2.8-12mm varifocal lens 6 in 1 dome camera uses advanced
imaging technology with resolution as high as 1080P.
Employing latest digital signal processor, this dome camera
also comes with a powerful OSD menu that features 3DNR,
DWDR, Auto day/night, and more.
Dome Camera...................................................................................1Pc
Camera Manual.................................................................................1Pc
Drill Template....................................................................................1Pc
Mounting Screws Kit.......................................................................1Pc
CCTV Monitor
DVRTVI/CVI/AHD to HDMI
Converter
TV or HDMI Monitor
PowerVideo
POWER (Red)
HD-SDI/EX-SDI (Black)
HD- TVI/CVBS/AHD/CVI (Yellow)
AVHD830IR
• 1/2.8"SONY Starvis Back-illuminated CMOS Sensor
• HD-SDI/EX-SDI/ CVBS/AHD/TVI/CVI
• 2.8-12mm Varifocal Lens
• IR Distance Max. 100 Ft.
• Outdoor Use, OSD&UTC Support
• Digital Noise Reduction
• Digital Wide Dynamic Range
• Multiple language OSD
(includes English, Spanish, French,
Portuguese, Chinese, and Korean.)
UP
SET
DN
/