ADEMCO StreetSmart Code Encryptor II CE2Y Survival Manual

ADEMCO
Brand
ADEMCO
Model
StreetSmart Code Encryptor II CE2Y
Type
Survival Manual
Code-Encryptor II
Street-Smart security universal add-on keyfob system
Model Numbers:
F
CE2Y = 3 button “Yellow”
F
CE2R = 3 button “Red”
F
CE2YLX = 4 button “Yellow”
F
CE2RLX = 4 button “Red”
F
WELY = 1 button panic “Yellow”
F
WELR = 1 button panic “Red”
Panel Compatibility:
F
“Yellow”
Ø
Ademco (addr 03 or 17)
Ø
DSC
Ø
Napco 100E (addr 02)
Ø
Moose (addr 04)
Ø
Caddx 8600E/8980E
F
“Red”
Ø
FBII (addr 08)
Ø
Napco Express/Gemini
Ø
Napco P400/P600/P800
Ø
Caddx NX6/NX8
FEATURES
F
Functions: Away, Stay, Disarm,
Garage door opener, Panic.
F
7 remotes per receiver
F
1 receiver per panel
F
Status LED
F
Universal unit
– Works on multiple manufacturers panels.
Setup made easy:
1) Connect CE2 to panel keypad bus.
(With panel powered up)
2) After power up CE2, LED will
blink once, then flash to indicate the
type of control that was recognized.
3) Program the user code:
Ø
Press and hold the button on the
receiver.
Ø
The LED will come on for 3
seconds.
Ø
After the LED turns off, release
the button.
Ø
The LED will begin flashing.
Ø
Slowly and firmly enter the 4-
digit user code at the system
keypad.
Ø
The LED should stop flashing.
Add more remotes:
1) Key 78738 on the system
keypad.
The system will arm stay.
2)
Press the #1 button on the remote
until the system disarms
Note: the remotes included with the CE2 are
enrolled from the factory.
Delete all remotes:
Key 76278 on the system keypad. The
keypad should beep or flash the lights.
  • Page 1 1

ADEMCO StreetSmart Code Encryptor II CE2Y Survival Manual

ADEMCO
Brand
ADEMCO
Model
StreetSmart Code Encryptor II CE2Y
Type
Survival Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents