Mares Drak Download Procedure Owner's manual

UPLOAD MENÙ

The data upload function can be accessed using the Upload menu

To transfer your dive data to the program, proceed as follows:

1. Insert the USB connector of the cable provided to a USB port on your computer.

Then connect the other 5-pin MINI-B connector to the interface.

2. Turn on the PC and start the Drak program by clicking the corresponding icon.

Drack Interface will show a green light

3. Select DOWNLOAD

4. Using the button bar on the upper left, choose whether to append data to an

existing Log Book file

5. The Warning message in the box means the Drak interface is not properly plugged

in.

In this case:

• If Drak interface is plugged: please unplug it, then press the OK button and,

after that, plug the Drak interface into the USB port

• If the Drak interface has not been plugged yet: first press the OK button, then

plug the Drak interface into the USB port

6. The following dialog box will be shown on the screen

7. Please connect your Drak Interface to your Nemo Wide and set PC mode by

selecting PC on Nemo Wide and by pressing Nemo Wide ENTER button.

Drak Interface will show a red light

8. Press OK and wait for the data transfer to complete (the status of the data transfer

is indicated by a “Progress” bar).

9. When the upload is complete a summary window will appear indicating the number

of dives saved.