2. Computers & electronics
  3. Computer components
  4. System components
  5. Memory modules
  6. Dataram
  7. 8GB(2 x 4GB) DDR2-667

Dataram 8GB(2 x 4GB) DDR2-667, GRH585G2/16GB, GRH585G2/64GB, GRH585G2/8GB, GRH585G2L/4GB, GRH585G2L/8GB Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Dataram 8GB(2 x 4GB) DDR2-667 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
GRH585G2
DDR2-667, PC2-5300, Registered, ECC, 1.8V, 240-pin DIMMs
GRH585G2 30-Jul-09
Products in Family
GRH585G2L/4GB (2 x 2GB Low Power 1R DIMMs)
GRH585G2S/4GB (2 x 2GB 1R DIMMs)
GRH585G2/8GB (2 x 4GB 2R DIMMs)
GRH585G2L/8GB (2 x 4GB Low Power 2R DIMMs)
GRH585G2/16GB (2 x 8GB 2R DIMMs)
GRH585G2/64GB (8 x 8GB 2R DIMMs)
Features Description
240-pin JEDEC-compliant DIMMs
133.35 mm wide by 30 mm high (1.20” x 5.25”)
Data Transfer Rate: 5.3 Gigabytes/sec
Operating Voltage: 1.8 V ±0.1
Error Checking and Correction (ECC) bits
Supports Intel SDDC and Chipkill Advanced ECC Features
Fully RoHS Compliant
Each GRH585G2 upgrade consists of a matched set of
two (eight in the case of the 64GB Kit) DDR2-667
Registered DIMMs with address/command parity
functionality. One 2K-bit EEPROM is used for Serial
Presence Detect. Low-power versions consume less
power than DIMMs originally released by the OEM and
Dataram.
Dataram Product HP Product Supported in these HP systems:
GRH585G2L/4GB
GRH585G2S/4GB
GRH585G2/8GB
GRH585G2L/8GB
GRH585G2/16GB
GRH585G2/64GB
483401-B21
461840-B21
408854-B21
483403-B21
408855-B21
495605-B21
ProLiant BL25p G2, BL260c G5, BL2x220c G5, BL45p
G2, BL465c, BL465c G5, BL465c G6, BL495c G5,
BL495c G6, BL685c, BL685c G5, BL685c G6, DL145 G3,
DL165 G5, DL165 G5p, DL165 G6, DL180 G5, DL185
G5, DL365, DL365 G5, DL385 G2, DL385 G5, DL385
G5p, DL385 G6, DL585 G2, DL585 G5, DL585 G6,
DL785 G5, ML150 G5
30.000
[1.181]
63.00
[2.480]
55.00
[2.165]
5.00
[0.197]
5.18
[0.204]
123.00
[4.842]
10.00
[0.394]
17.80
[0.701]
4.00
[0.157]
2.54 Min
[0.100 Min]
1.27 ±.10
[0.0500 ±0.0040]
3.94 Max
[0.155] Max
4.00 Min
[0.157] Min
133.350
[5.250]
Back view
Front view
Side view
Notes
Tolerances on all dimensions
except where otherwise
indicated are ±.13 (.005).
All dimensions are expressed
in millimeters [inches]
Copyright © 2009 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.
/