DataSmart HP
10.0" - 17.0"
Compact "Ready-to-work” cases for 10" to 17" Notebooks and
HP DJ 470 printer
The case is extremely compact as a result of the "sandwich
" construction with the printer sitting beneath the Notebook
platform. This means that your notebook and printer remain
connected up in your case for when you want to work. The
paper feed runs beneath the Notebook platform to save space
and keep paper crease-free and when the Notebook platform
is folded down paper can be removed from the side.
Notebooks are held in place with 3M Dual Lock fasteners and
synthetic corner supports. The individually adjustable corner
supports ensure that the extra large, detachable Notebook
platform can accommodate Notebooks ranging from 10" to 17
". Two different adaptors (2 x Euro 8 and 2 x Euro 8 with a
protective earth conductor - IBM/ Compaq cable) ensure that
Notebooks from different manufacturers can be connected.
The HP DJ 470 printer fits snugly into the base of the case.
The power supply unit from the Notebook and printer are
connected via the 220V IEC power socket on the exterior of
the case. A compartment in the lid of the case allows
documents to be transported safely.
Art. Nr.: D30245 (black)
D30244 (silver)
Material:
Weight: 4 kg / 8.82 lbs
Dimensions: 500 x 420 x 150 mm / 19.7 x 16.5 x 5.9 inch
For Notebooks up to: 405 x 295 x 50.0 mm / 15.9 x 11.6 x 2
inch
DICOTA UK Ltd.
DICOTA House, Eastheath Avenue, Wokingham
RG41 2PR Berkshire
Phone: +44 (0)1189 785 074
FAX: +44 (0)1189 784 941
-
1
Dicota D30244 Datasheet
- Category
- Equipment cases
- Type
- Datasheet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI