Truss-Style Cinefold
All aluminum is clear satin anodized for long life; steel parts are cadmium
positive locking hinge latches and a Handy Crank through the hinge.
Tough Construction
All horizontal hinges on Truss-Style Cinefolds are reinforced by truss
frame stieners, which mount across the back of the hinge
and are held rigidly in place by eight Handy Cranks. Truss-Style
Cinefold is furnished with heavy-duty legs to reinforce against
front-to-back movement, and the provided Anti-Sway Stabilizers
also prevent side-to-side movement. In addition, all Truss-Style
attaches to the back of the frame for added strength.
Viewing Surface
Flexible Matt White for front projection. For rear projection,
Cineex and Low-Gain Cineex neutral grey surfaces are
available. Uniex White viewing surface is suitable for either
front or rear projection, and is ideal for edge blending. Two
or more carrying cases are included. Case dimensions are
Optional Dress Kits
aluminum valance bar and drapery bars attach without tools to the Dress
Kit ttings found on all Truss-Style Cinefold frames. The viewing surface is
tted with snaps to accept the skirt or select optional adjustable skirt bar.
Skirt bar allows for adjustment of screen size and aspect ratio by raising
Sizes and Formats
Square Format
NTSC Format
HDTV Format
Custom sizes or Masking Strips available by quotation.
L-Brace
Designed for large audience presentations, Truss-Style
Cinefold’s extra-rigid frames and legs are constructed of
parallel sections of 1" (2.5cm) square hard-alloy aluminum
tubing, heliarc welded to form a sturdy 6" (15cm) wide truss.
Above: Truss Cinefold
with a black velour
Dress Kit.
Right: Rear view of
Truss Cinefold with
Valance Bar and
Drapery Bars.
Online at: www.draperinc.com/go/TrussCinefold.htm
Valance Bar
Drapery Bar
Anti-Sway
Stabilizers
Heavy-
Duty
Legs
12 Draper, Inc. • 765.987.7999 • 800.238.7999 • www.draperinc.com