Dorel WM3611 Instructions Manual

Dorel
Brand
Dorel
Model
WM3611
Type
Instructions Manual

Dorel WM3611

Dorel WM3611 Metal Daybed is easy to assemble and perfect for a comfortable sleep. The frame of the bed is made of metal and is intended for use with a coil spring mattress (not included). Estimated assembly time for this product is 45 minutes and it can be done by one person, although it is recommended to have an assistant.

The maximum weight capacity of the bed is 225 pounds. It comes with 24 plastic caps that should be inserted into the slats and then attached to the headboard and the side rail. The product also comes with 1 Allen key.

If any part of the daybed is missing or damaged, contact the customer service and they will replace the part free of charge.

Dorel WM3611

Dorel WM3611 Metal Daybed is easy to assemble and perfect for a comfortable sleep. The frame of the bed is made of metal and is intended for use with a coil spring mattress (not included). Estimated assembly time for this product is 45 minutes and it can be done by one person, although it is recommended to have an assistant.

The maximum weight capacity of the bed is 225 pounds. It comes with 24 plastic caps that should be inserted into the slats and then attached to the headboard and the side rail. The product also comes with 1 Allen key.

If any part of the daybed is missing or damaged, contact the customer service and they will replace the part free of charge.

METAL DAYBED
(TAKEN FROM CARTON)
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
_______ / _______ / _______
LOT NUMBER:
DATE OF PURCHASE:
Model No: WM3611
INSTRUCTION MANUAL
UPC CODE:
0-65857-15764-2
NOTE:
THIS INSTRUCTION BOOKLET
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: 1-800-295-1980
E-Mail: das@dorel.com
Fax #: 514-353-7819
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:DAS@DOREL.COM
*Ensure all parts and components are present before beginning assembly.
* Intended maximum weight is 225LBS.
* To be used with coil spring mattress only.
LIMITED WARRANTY
Dorel Asia warrants its product to be free from defects in material and
workmanship and agrees to remedy any such defect. This warranty covers 1 year
from the date of original purchase. This warranty is valid only upon presentation of
proof of purchase. This is solely limited to the repair or replacement of defective
furniture components and no assembly labor is included. This warranty does not
apply to any product which has been improperly assembled, subjected to misuse or
abuse or which has been altered or repaired in any way. This warranty gives you
specific legal rights and you may also have other rights which vary from State to
State.
Check bolts/screws periodically and tighten them if necessary.
WARNING: Should this product become
damaged, and/or components are broken or missing,
DO NOT USE.
WARNING
* Assembly and handling may require two people.
* Estimated assembly time is 45 minutes.
*Assemble on soft, smooth surface to prevent damage to product finish.
Dust this item regularly with a soft, lint-free cloth to prevent soil build up. Wipe
with a soft, damp cloth if necessary. Do not use abrasives, cleaners, or polish on the
metal frame as this may damage the finish.
MAINTENANCE
* Read all instructions completely before assembly.
* Do not use power tools.
* CAUTION: Adult assembly required.
CARE AND CLEANING
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.
E-MAIL: [email protected]
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
CALL 1-800-295-1980
METAL DAYBED
WM3611
HARDWARE LIST
1 2 3
4
φ1/4"×3/4"
ALLEN KEY
1PC
HEX SOCKET HEAD BOLT
9 PCS
PARTS LIST
A B C D E
HEADBOARD
1 PC
LEFT SIDE FRAME
1 PC
RIGHT SIDE
FRAME
1 PC
LEG
SLAT
PLASTIC CAP
24 PCS
SIDE RAIL
1 PC
F G H
SUPPORT
STRETCHER
1 PC
12 PCS
5
φ1/4"×1/2"
3 PCS
I J
SUPPORT
STRETCHER
2 PCS
SUPPORT
STRETCHER
2 PCS
φ1/4"×1-3/16" φ1/4"×1-3/4"
HEX SOCKET HEAD BOLT
4 PCS
HEX SOCKET HEAD BOLT
4 PCS
HEX SOCKET HEAD BOLT
8 PCS
STEP 1
NOTE: Do not fully tighten bolts. Leaving them loose will facilitate assembly in the
following steps.
METAL DAYBED
WM3611
Attach left side frame (B) and right side frame (C ) to headboard (A) with hex socket
head bolt (3). Use Allen key (5) to tighten bolts.
3
3
3
3
B
C
A
5
STEP 2
Attach side rail (D) to left side frame (B) and right side frame (C) with hex socket head
bolts (1). Use Allen key (5) to install the bolts.
NOTE: Do not fully tighten the bolts. Leaving them loose will facilitate assembly in the
following steps.
METAL DAYBED
WM3611
Attach support strechers (E & F) to headboard (A) and side rail (D) with hex socket head
bolts (2). Use Allen key (5) to tighten bolts.
NOTE: Do not fully tighten bolts. Leaving them loose will facilitate assembly in the
following steps.
METAL DAYBED
WM3611
STEP 3
D
2
2
2
5
E
A
2
2
2
F
F
2
Attach support stretchers (G) to support stretchers (E & F) with hex socket head bolts
(4). Use Allen key (5) to tighten bolts.
NOTE: 1- Make sure that the holes on support stretchers (G) are located near the side
frames during assembly.
2- Fully tighten all bolts previously installed.
METAL DAYBED
WM3611
STEP 4
E
A
F
F
G
G
4
4
4
4
4
4
4
4
4
5
D
E
A
F
F
G
G
4
4
4
4
4
4
4
4
4
5
D
Hole on support
stretcher (G) located
near the side frame
Hole on support
stretcher (G) located
near the side frame
Attach legs (H) to support stretchers (E & G) with hex socket head bolts (2).
Use Allen key (5) to tighten bolts.
METAL DAYBED
WM3611
STEP 5
2
G
G
E
A
2
H
2
2
H
H
F
5
STEP 6
Insert both ends of slats (I) into plastic caps (J).
Attach plastic caps (J) to headboard (A) and side rail (D)
METAL DAYBED
WM3611
A
D
J
I
I
I
That's it ! You've finished assembling your daybed!
METAL DAYBED
WM3611
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury .
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: 1-800-295-1980
E-Mail: [email protected]
Fax #: 514-353-7819
INTENDED MAXIMUM
WEIGHT IS 225LBS.
Below photo is for reference
only. Coil Spring Mattress must
be purchased seperately.
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:DAS@DOREL.COM
-9-
MODEL #: WM3611
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Fax Number 514-353-7819
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Parts description and quantity: (Please list model number or SKN number)
Customer Service
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Customer Service Phone Number 1-800-295-1980
Customer Service Representative Mailing Address:
C
B
D
E
A
B
B
B
Email: [email protected]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Dorel WM3611 Instructions Manual

Dorel
Brand
Dorel
Model
WM3611
Type
Instructions Manual

Dorel WM3611

Dorel WM3611 Metal Daybed is easy to assemble and perfect for a comfortable sleep. The frame of the bed is made of metal and is intended for use with a coil spring mattress (not included). Estimated assembly time for this product is 45 minutes and it can be done by one person, although it is recommended to have an assistant.

The maximum weight capacity of the bed is 225 pounds. It comes with 24 plastic caps that should be inserted into the slats and then attached to the headboard and the side rail. The product also comes with 1 Allen key.

If any part of the daybed is missing or damaged, contact the customer service and they will replace the part free of charge.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents