Intermec 5023 User Manual Addendum

Type
User Manual Addendum

This manual is also suitable for

5023 Data Collection PC User's Manual Addendum
1
5023 Data Collection PC User’s Manual Addendum
This addendum explains new features and functions available on the 5023 Data
Collection PC™ with firmware release 3.0. Read this addendum to learn about these
new features and then store this addendum with your user’s manual for future reference.
By adding this addendum, the part number of the 5023 Data Collection PC User’s
Manual is 070698-003.
Firmware Release 3.0 Features
The 5023 now ships with Windows
®
CE 3.0, providing greater storage and file-handling
capabilities.
Other new features have been introduced in this firmware release for the 5023. The next
sections explain these new features and describe where to go for more information.
General Features
Help for new users In the Start menu, choose 502X Intro in the Programs list to view
Introducing the 502X, an online document intended for new 502X users. Introducing
the 502X includes basic configuration and navigation information. For help with
accessing the Start menu, see Using the Start Menu in Chapter 1 of the 5023 users
manual.
Internet Explorer (IE) 5.0 Web browser You can use Internet Explorer for Web
browser-based data collection applications. For help, see Using Internet Explorer in
Chapter 5 of the 502X Data Collection PC System Manual (Part No. 071479).
Unit Manager The Unit Management applications are now part of Unit Manager. For
help using Unit Manager, see Chapter 4, Using Unit Manager, in the 502X system
manual.
New default date and time Windows CE 3.0 sets the date and time to 12:00 A.M.,
June 1, 2001 when you cold boot the 5023. You can set the date and time by using
the Fast Config or Configuration applications. For help, see Using Fast Config or
Using the Configuration Application in Chapter 2 of the 5023 users manual.
the Date/Time Control Panel. For help, see Chapter 3, Customizing the 502X
Using the Control Panel, in the 502X system manual.
the Set Date and Time reader command. For help, see Chapter 6, Using Reader
Commands, in the 502X system manual.
Increased memory The 5023 now ships with 16MB RAM and 32MB flash memory.
5023 Data Collection PC User's Manual Addendum
2
Changes to Configuration Commands
Firmware release 3.0 for the 5023 includes these changes to configuration commands:
All IDRS (Intermec Device Registration Services) commands are now available.
For more information, see Chapter 7, Configuration Command Reference, in the
502X system manual.
See the next illustration for the command locations in the Configuration application
menus. This illustration replaces the illustration on page 2-14 of your 5023 user's
manual.
Protocols
UDP Plus
TFTP
IDRS
Advanced
UDP Plus Enable
Radio
Identification
Device Name
Scanner
Timeout
Trigger Mode
Redundancy
IP Address
Name Servers
TCP/IP Extensions
Radio
Virtual Wedge
Preamble
Postamble
Grid
Code Page
Symbologies
Code 39
Interleaved 2 of 5
Code 2 of 5
Codabar
Code 93/93i
MSI
UPC/EAN
Code 128
PDF 417
Virtual
Wedge
Display
Speaker
Volume
Backlight Timeout
Backlight Level
Power
Management
Automatic Shutoff
Serial Port
IrDA Baud Rate
Keypad
Key Clicks
Caps Lock On
Security
Tr ap s
Read Only Community String
Read/Write Community String
Read Encryption
Write Encryption
Encryption Key
Identification
Contact
Name
Location
5023U026.eps
Authentication
Threshold
Date/Time
Date
Time
Options
Function Key
URL's
Home Page
Cache Size (KB)
Underline Links
Use LAN (no auto dial)
Use Proxy Server
F6 key
F7 key
F8 key
F9 key
F10 key
File Edit Configure Troubleshoot
Data Collection
Unit
IE Browser
Network
SNMP
File Edit Configure Troubleshoot
Data Collection
Unit
IE Browser
Network
SNMP
File Edit Configure Troubleshoot
Data Collection
Unit
IE Browser
Network
SNMP
File Edit Configure Troubleshoot
Data Collection
Unit
IE Browser
Network
SNMP
File Edit Configure Troubleshoot
Data Collection
Unit
IE Browser
Network
SNMP
5023 Data Collection PC User's Manual Addendum
3
Upgrading or Restoring an Operating System Image
You must return a 5023 to the factory for upgrading to firmware release 3.0. Contact
your Intermec service representative for more information.
If you think your 5023 with firmware release 3.0 has a corrupted operating system
image, contact your Intermec service representative to confirm that you need to restore
the operating system and to obtain a new image. For more information, see Upgrading
or Restoring the 5023 Operating System Image in Chapter 4 of the 5023 users manual.
6001 36th Avenue West
Everett, WA 98203
U.S.A.
www.intermec.com
© 2002 Intermec Technologies Corp.
All Rights Reserved
5023 Data Collection PC User's Manual Addendum
*072758-001*
*072758-001*
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Intermec 5023 User Manual Addendum

Type
User Manual Addendum
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI