Workzone 50501 User manual
- Category
- High-pressure cleaners
- Type
- User manual
English... Page 2
Español... Página 15
USA
1800 505 8311 [email protected]
MODEL: 50501
PRODUCT CODE: 50501 05/2017
2
AFTER SALES SUPPORT • SERVICIO POSVENTA
DISTRIBUTED BY • DISTRIBUIDO POR:
ALDI INC.
BATAVIA, IL 60510
www.aldi.us
User Guide
Manual
del usuario
YEAR WARRANTY
AÑOS DE GARANTÍA
1600 PSI ELECTRIC PRESSURE WASHER
HIDROLAVADORA ELÉCTRICA
DE 1600 PSI
Contents
Overview/ Pack Content ............................................................... 3
Workplace / Electrical Safety ....................................................... 3-5
Instruction/Operation ................................................................... 5
Safety regulation .................................................................. 5
Scope of Application ............................................................ 6
Main Technical Specications .............................................. 6
Working Principle ................................................................. 6
Operation Rules .................................................................. 7-10
Maintenance ....................................................................... 11
Trouble Shooting ........................................................................ 12
Explosive View & Parts list ........................................................ 13
Warranty ..................................................................................... 28
Warranty Card ............................................................................ 29
WARNING
1800 505 8311 [email protected]
Overview / Pack Content
3
AFTER SALES SUPPORT
USA
USA
High Pressure Washer
Overview
Set includes these parts:
1 High pressure washer
5 Accessories: spray handle, jet-fan lance, cleaning pin,
detergent bottle, inlet tting adapter
1 Instruction manual
1 Warranty card
IMPORTANT SAFETY INSTRUCTIONS
Handgun staff assemble (Regulate pressure)
Handgun grip assemble
Water outlet(Connect high pressure hose)
High pressure hose
1
2
3
4
Pack contents / electrical safety
1
3
2
4
READ & UNDERSTAND
INSTRUCTIONAL MANUAL
Do not use the appliance without reading the instruction sheet !
DOUBLE INSULATION
4005977
HP9502A
ETL APPROVED
WARNING
1800 505 8311 [email protected]
4
AFTER SALES SUPPORT
USA
USA
High Pressure Washer
Workplace/Electrical Safety
When using this product, basic precaution should always be
followed, including the following:
1. Don’t use the appliance without reading the instruction sheet.
2. Risk of injection or injury, do not direct discharge stream at persons.
3. WARNING: This appliance has been designed for use with the cleaning
agent supplied or recommended by the manufacturer. The use of other
cleaning agents or chemicals may adversely affect the safety of the
appliance.
4. WARNING: Do not use the appliance within range of persons unless
they wear protective clothing.
5. WARNING: High-pressure jets can be dangerous if subject to misuse.
The jet must not be directed at persons, animals, live electrical
equipment or the appliance it self.
6. Don’t direct the jet against yourself or others in order to clean clothes or
foot-wear.
7. Disconnect from the electrical power supply before carrying out user
maintenance.
8. High-pressure cleaners shall not be used by children or untrained
personnel.
9. To ensure the appliance safetyuse only original spare parts from the
manufacturer or approved by the manufacturer.
10. WARNING: High-pressure hoses, ttings and couplings are important
for the safety of the appliance. Use only hoses, tting and couplings
recommended by the manufacturer.
11. Don’t use the appliance if a supply cord or important parts of the
appliance are damaged, e.g. safety devices, high-pressure hoses,
trigger gun.
12. WARNING: Inadequate extension cords can be dangerous.
13. If an extension cord is used, the plug and socket must be of watertight
construction.
14. If the supply cord is damaged, it must be replaced by the manufacturer
or its service agent or a similarly qualied person in order to avoid a
hazard.
15. To reduce the risk of injury, close supervision is necessary when a
product is used near children.
16. Know how to stop the product and release pressure quickly, be
thoroughly familiar with the controls.
17. Stay alert-watch what you are doing.
WARNING
1800 505 8311 [email protected]
Safety Regulation
5
AFTER SALES SUPPORT
USA
USA
High Pressure Washer
Risk of injection or injury do not direct discharge stream at
persons.
1. Don’t use the appliance without reading the instruction sheet.
2. Risk of injection or injury, do not direct discharge stream at persons.
3. WARNING: This appliance has been designed for use with the cleaning
agent supplied or recommended by the manufacturer. The use of other
cleaning agents or chemicals may adversely affect the safety of the
appliance.
4. WARNING: Do not use the appliance within range of persons unless
they wear protective clothing.
5. WARNING: High-pressure jets can be dangerous if subject to misuse.
The jet must not be directed at persons, animals, live electrical
equipment or the appliance it self.
6. Don’t direct the jet against yourself or others in order to clean clothes or
foot-wear.
7. Disconnect from the electrical power supply before carrying out user
maintenance.
8. High-pressure cleaners shall not be used by children or untrained
personnel.
9. To ensure the appliance safetyuse only original spare parts from the
manufacturer or approved by the manufacturer.
10. WARNING: High-pressure hoses, ttings and couplings are important
for the safety of the appliance. Use only hoses, tting and couplings
recommended by the manufacturer.
11. Don’t use the appliance if a supply cord or important parts of the
appliance are damaged, e.g. safety devices, high-pressure hoses,
trigger gun.
12. WARNING: Inadequate extension cords can be dangerous.
13. If an extension cord is used, the plug and socket must be of watertight
construction.
14. If the supply cord is damaged, it must be replaced by the manufacturer
or its service agent or a similarly qualied person in order to avoid a
hazard.
15. To reduce the risk of injury, close supervision is necessary when a
product is used near children.
16. Know how to stop the product and release pressure quickly, be
thoroughly familiar with the controls.
17. Stay alert-watch what you are doing.
18. Do not operate the product when fatigued or under the inuence of
alcohol or drugs.
19. Keep operating area clear of all persons.
20. Do not overreach or stand on unstable support. Keep good footing and
balance at all times.
21. Follow the maintenance instructions specied in the manual.
22. This product shall only be connected to a power supply receptacle
produced by a ground fault circuit interrupter.
23. Always wear protective clothing and safety glasses. Loose particles and
other debris may be propelled at high speed by the water jet. Wear ear
protectors.
25. The electric supply connection shall be made by a qualied electrician.
26. Use the appliance at or above 32°F (0°C).
SAVE THESE INSTRUCTIONS
1. Safety regulation
1.1Read each contents of the manual before operation: abide this safety
regulation to avoid any accident or damage.
1.2Check to make sure that the cleaner’s voltage (120VAC) conforms to
that of the power source. According to this regulation, the protective
switch must be installed.
1.3Cut off the power while the cleaner is not in operation.
1.4Do not to use the cleaner in the rain; water is not allowed to spray
on the machine, to avoid damage of the insulation.
1.5Keep the power wires away from the heat source and sharp knife etc. so
as to avoid damage.
1.6Never insert or pull up the plug with wet hand, or trying to move the
machine.
1.7A damaged high-pressure hose must be replaced immediately. Only use
hoses and connections recommended by the manufacturer.
1.8Keep this machine away from concentrated acid, dissolvent and am
mable, explosive materials such as hot oil, petrol and acetone etc.
1.9Never jam the gun trigger in position during operation.
1.10 There is no adjustable safety valve, when the water pressure is
enough, the safety valve will be opened automatically
AFTER SALES SUPPORT
USA
USA
High Pressure Washer
1800 505 8311 [email protected]
Application/ Technical Data/ Working Principle
6
18. Do not operate the product when fatigued or under the inuence of
alcohol or drugs.
19. Keep operating area clear of all persons.
20. Do not overreach or stand on unstable support. Keep good footing and
balance at all times.
21. Follow the maintenance instructions specied in the manual.
22. This product shall only be connected to a power supply receptacle
produced by a ground fault circuit interrupter.
23. Always wear protective clothing and safety glasses. Loose particles and
other debris may be propelled at high speed by the water jet. Wear ear
protectors.
25. The electric supply connection shall be made by a qualied electrician.
26. Use the appliance at or above 32°F (0°C).
SAVE THESE INSTRUCTIONS
1. Safety regulation
1.1Read each contents of the manual before operation: abide this safety
regulation to avoid any accident or damage.
1.2Check to make sure that the cleaner’s voltage (120VAC) conforms to
that of the power source. According to this regulation, the protective
switch must be installed.
1.3Cut off the power while the cleaner is not in operation.
1.4Do not to use the cleaner in the rain; water is not allowed to spray
on the machine, to avoid damage of the insulation.
1.5Keep the power wires away from the heat source and sharp knife etc. so
as to avoid damage.
1.6Never insert or pull up the plug with wet hand, or trying to move the
machine.
1.7A damaged high-pressure hose must be replaced immediately. Only use
hoses and connections recommended by the manufacturer.
1.8Keep this machine away from concentrated acid, dissolvent and am
mable, explosive materials such as hot oil, petrol and acetone etc.
1.9Never jam the gun trigger in position during operation.
1.10 There is no adjustable safety valve, when the water pressure is
enough, the safety valve will be opened automatically
2. Scope of Application
2.1Use the appliance to clean various kinds of vehicles, such as cars
motors, and bicycles etc.
2.2Clean the outer wall of buildingsgroundgarden etc.
3. Main Technical Specifications
Aldi item # 50501
Manufacture Model # HP9502A
120V AC 60 Hz 13A, 1300PSI
Max pressure: 1600 PSI
Input pressure: 80PSI
Rated ow: 1.35GPM
Only cold water used
4. Working principle. Structural characteristics
4.1 Working principle
The motor directly drives the gear shaft of the plunger pump. The sloping
cam plate changes the turning movement of the gear shaft into the
reciprocation. When the plunger moves back, the water outlet valve closes
and forms a vacuum. And the water inlet valve opens, water goes into the
cylinder through it; when the plunger moves forward the water inlet valve
closes and the water pressure in the cylinder increases. When the water
outlet valve opens and the high-pressure water will be transported to the
hose.
4.2 Structural characteristics
4.2.1As the sing phase series motor chosen to directly drive the 3-cylinder
axial plunger pump by the gearthe cleaner is compact in structure,
small in size, artistic in appearance and reliable in operation.
4.2.2As the cleaner is light, it’s rather convenient in moving.
AFTER SALES SUPPORT
USA
USA
High Pressure Washer
1800 505 8311 [email protected]
Operation Rules - Preparation
7
4.2.3The pump of the cleaner has the function of automatic unloading.
When the spray gun trigger closes, the unload valve opens, and the
water ows back to the suction side of the pump, so the cleaner has
the feature of low consumption of water and electricity.
4.2.4Use the NO.32 machine oil and the high-temperature lubricating oil in
the pump.
5. Operating rules
5.1 Preparation
5.1.1If on unpacking the unit, you discover damage has been caused
during transportation, please contact your dealer.
5.1.2Check to make sure that the packing list and the information paper are
correct, then conserve it.
5.1.3 Insert the big handle into the
unit body, by the 3 buckles.
5.1.4Revolve the inlet male connector
into the inlet hose, and tighten.
Figure 1
Figure 2
AFTER SALES SUPPORT
USA
USA
High Pressure Washer
1800 505 8311 [email protected]
Operation Rules - Assembly
8
5.1.5 Connect the water supply hose to the connector.
The water supply hose is not provided in the pack.
5.1.6 Check whether the voltage shown on the rating plate corresponds to
that of the power source: voltage 120V, the current carrying capacity
of the circuit should not be less than 13A.
5.1.6 Spray units connect: Push the lance into the trigger grip handle and t
wist it to secure it as shown in gures 2
5.2 Assembly
5.2.1 Make sure that the high pressure cleaner is switched off and
disconnected from the mains supply.
5.2.2 Fit the carrying handle to the high pressure cleaner using the handle
securing bolt.
5.2.3 Connect the hose and trigger assembly to the water outlet pope.
5.2.4 The inlet lter must always be tted inside the water inlet to lter out
sand, limestone and other impurities as they will damage the pump
valves. Caution: failure to t the lter will invalidate the guarantee.
5.2.5 Screw the connector onto the water inlet.
5.2.6 Connect the water supply hose to the connector. The water supply
hose is not provided in the pack.
WARNING: The temperature of the incoming water must not exceed 104°F (40ºC).
insert into the black
quick connector
insert into the aluminum
connector
Figure 3
running water
gun
Push
Twist
Figure 4
Twist Figure 2
Figure 2
Tight spray
Wide spray
Twist
5.3Operation
5.3.1 Connect the high-pressure hose with the locknut to the high-
pressure outlet of the cleaner, then tighten it.
5.3.2 Connect one side of the inlet hose with inlet nipple to the cleaner,
another side to the water faucet, tighten with a clamp. (Note: there is
a seal ring in nut, no losing.)
5.3.3 Connect the water supply and the power source, then turn on the
power switch of the cleaner and the gun trigger, as air has been
exhausted, the cleaner is ready for operation.
NOTE: The switch is installed in the black rubber water-repellent mat of
the appliance.
In case a water tank is used to supply water, water should ow into the
pump through the inlet hose and the trigger be turned on so as to exhaust
the air in the hose at the same time. When the pump works properly, place
the inlet hose in the water tank rapidly the water level in the tank should
not be lower than the cleaner itself, and the inlet hose must be tted a
lter.
5.3.4The lance has an adjustable nozzle to allow you to vary the width of
the spray. To adjust the width of the spray, move the nozzle as
shown in gures 4
AFTER SALES SUPPORT
USA
USA
High Pressure Washer
1800 505 8311 [email protected]
Operation Rules - Operation
9
Figure 5
5.3.5During the cleaning, the distance between the nozzle and the object
surface to be cleaned should not be too far, normally not more
than 11.81in (30cm), as the impulsive force decreases with the
increase of the distance.
• You should hold the gun trigger rmly during the cleaning.
• The safety value doesn’t control the gun during operation, but only
prevents it from opening unintentionally.
• Sprayed the human beings or electric equipment is forbidden.
• Don’t place the power wire on the road so as avoid breaking the wire.
• The nozzle used in the cleaner are supplied by our factory.
5.3.6After the cleaning is nished, open the trigger, switch off the pump
and unplug the power cable from the mains. Close the water inlet
and detach the appliance from the water connection. Pull the trigger
until there is no more pressure in the appliance, and secured the
trigger with safety button against unintentional opening.
5.3.7 GFCI Operation Instruction:
This pressure washer is provided with a ground fault circuit inter
rupter (GFCI) built into the plug of the power supply cord. This
device provides additional protection from the risk of electric shock.
Should replacement of the plug or cord become necessary, use only
identical replacement parts that include GFCI protection.
Use only extension cords that are intended for outdoor use. These
extension cords are identied by a marking “Acceptable for use with
outdoor appliances; store indoors while not in use.” Use only exten
sion cords having an electrical rating not less than the rating of the
product. Do not use damaged extension cords. Examine extension
cord before using and replace if damaged. Do not abuse extension
cord and do not yank on any cord to disconnect. Keep cord away
from heat and sharp edges. Always disconnect the extension cord
from the receptacle before disconnecting the product from the
extension cord. Always plug the extension cord into a GFCI
protected outlet. To avoid the possibility of the tool plug getting wet
when using an extension cord, arrange a “drip loop” in the cord
connecting the pressure washer to the extension cord. The “drip
loop” is that part of the cord below the level of the connector which
prevents water travelling along the cord and coming in contact with
the connection. If the plug does get wet, DO NOT unplug the cord.
Disconnect the fuse or circuit breaker that supplies power to the
tool, then unplug and examine for presence of water in the connection.
AFTER SALES SUPPORT
USA
USA
High Pressure Washer
Operation Rules - Operation
1800 505 8311 [email protected]
10
5.3.5During the cleaning, the distance between the nozzle and the object
surface to be cleaned should not be too far, normally not more
than 11.81in (30cm), as the impulsive force decreases with the
increase of the distance.
• You should hold the gun trigger rmly during the cleaning.
• The safety value doesn’t control the gun during operation, but only
prevents it from opening unintentionally.
• Sprayed the human beings or electric equipment is forbidden.
• Don’t place the power wire on the road so as avoid breaking the wire.
• The nozzle used in the cleaner are supplied by our factory.
5.3.6After the cleaning is nished, open the trigger, switch off the pump
and unplug the power cable from the mains. Close the water inlet
and detach the appliance from the water connection. Pull the trigger
until there is no more pressure in the appliance, and secured the
trigger with safety button against unintentional opening.
5.3.7 GFCI Operation Instruction:
This pressure washer is provided with a ground fault circuit inter
rupter (GFCI) built into the plug of the power supply cord. This
device provides additional protection from the risk of electric shock.
Should replacement of the plug or cord become necessary, use only
identical replacement parts that include GFCI protection.
Use only extension cords that are intended for outdoor use. These
extension cords are identied by a marking “Acceptable for use with
outdoor appliances; store indoors while not in use.” Use only exten
sion cords having an electrical rating not less than the rating of the
product. Do not use damaged extension cords. Examine extension
cord before using and replace if damaged. Do not abuse extension
cord and do not yank on any cord to disconnect. Keep cord away
from heat and sharp edges. Always disconnect the extension cord
from the receptacle before disconnecting the product from the
extension cord. Always plug the extension cord into a GFCI
protected outlet. To avoid the possibility of the tool plug getting wet
when using an extension cord, arrange a “drip loop” in the cord
connecting the pressure washer to the extension cord. The “drip
loop” is that part of the cord below the level of the connector which
prevents water travelling along the cord and coming in contact with
the connection. If the plug does get wet, DO NOT unplug the cord.
Disconnect the fuse or circuit breaker that supplies power to the
tool, then unplug and examine for presence of water in the connection.
Maintenance
AFTER SALES SUPPORT
USA
USA
High Pressure Washer
1800 505 8311 [email protected]
11
WARNING: To reduce the risk of electrocution, keep all connections
dry and off the ground. Do not touch plug with wet hands.
6. Maintenance
6.1 Monthly or as required, maintenance the appliance.
6.1.1Clean the nozzle. Remove dirt from the nozzle hole with a needle and
rinse it with water from the front.
6.1.2Clean the strainer in the water connection. It can e easily removed
with at-nosed pliers.
6.2 Winter protection
Frost will destroy an appliance that has not been completely emptied of
water. The correct method is to separate the inlet hose from the water
supply system. Turn on the cleaner to run for about 30 seconds for water
extraction. Remove the high-pressure plastic hose to exhaust the remain-
ing water in it. The appliance had better be stored in a warm room.
AFTER SALES SUPPORT
USA
USA
High Pressure Washer
1800 505 8311 [email protected]
12
TROUBLE SHOOTING:
Trouble Shooting
Problem Causes Solution
Appliance doesn’t work
Appliance doesn’t reach
operational pressure
The pump leaks
No water ows or ow
rate too low
1. No power or condition in
the socket is not working
properly.
2. The connector cable is
damaged.
1. The double nozzle is
worn cut.
2. Air exists in the hose.
3. Dirt exists in the water
storage.
4. The inlet hose leaks or
blockage.
5. The inlet or outlet value
is damaged.
6. The sealed ring of the
plunger is damaged.
7. The O-ring of the unload
valve is damaged.
8. Pump seat leaks.
1. The sealed ring is
damaged.
2. The bolt work loose.
1. The new pump doesn’t
take in water.
2. Dirt exists in the pump.
3. The inlet or outlet valve is
damaged.
1. Switch on, and open the
gun trigger valve, then ll
water into the inlet hose
so as to exhaust air,
place the inlet hose into
water tank.
2. Remove the dirt.
3. Change the valve.
1. Change the sealed ring.
2. Tighten the bolt.
1. Change the double
nozzle.
2. Start the motor, turn on
the spray nozzle and ll
the inlet hose with water
to exhaust air.
3. Clean or Change the inlet
hose.
4. Change the valves.
5. Change the sealed ring.
6. Change the O-ring.
7. change the pump seat.
1. Check the power source
and the socket to see
if the plug connected.
2. Change the cable.
If any problems are encountered that are not covered above, refer to qualied service
personnel.
WARNING: To reduce the risk of electrocution, keep all connections
dry and off the ground. Do not touch plug with wet hands.
6. Maintenance
6.1 Monthly or as required, maintenance the appliance.
6.1.1Clean the nozzle. Remove dirt from the nozzle hole with a needle and
rinse it with water from the front.
6.1.2Clean the strainer in the water connection. It can e easily removed
with at-nosed pliers.
6.2 Winter protection
Frost will destroy an appliance that has not been completely emptied of
water. The correct method is to separate the inlet hose from the water
supply system. Turn on the cleaner to run for about 30 seconds for water
extraction. Remove the high-pressure plastic hose to exhaust the remain-
ing water in it. The appliance had better be stored in a warm room.
Exploded View & Parts list
AFTER SALES SUPPORT
USA
USA
High Pressure Washer
1800 505 8311 [email protected]
13
No Parts Description Qty
1 Back unit body 1
2 Front unit body 1
3 Big handle 1
4 Big handle cover plate 1
5 Motor cover 1
6 Motor cover plate 1
7 Fixed lm 1
8 Water inlet pipe 1
9 Roller 2
10 Roller insert 2
11 Switch box 1
12 Switch box cover 1
13 Power cord grip 1
14 Holster 2
15 Butt plate 2
16 Stator clamping 1
17 Waterproof sponge 1
18 Waterproof sponge 1
19 Waterproof cover 1
20 Waterproof cap 1
No Parts Description Qty
21 Screw 24
22 Switch 1
23 Power cord 1
24 GFCI 1
25 Internal wire 1
26 Crimp cap 3
27 Motor pump 1
28 O Sealing ring 1
29 Quick connector washer 1
30 Quick connector 1
31 Switch box 1
32 Switch bracket 1
33 U-pin 1
34 Micro switch 1
35 TSS wire 1
36 Handgun grip assemble 1
37 Handgun staff assemble 1
38 Pressure hose 1
26
2
4
3
7
27
8
29
30
22
12
11
13
15
28
1
5
6
9
14
21
16
24
25
35
32
34
31
33
38
17
18
10
19
20
37
36
23
LIMITED WARRANTY
This products is under warranty to the original retail consumer against
defects in material and workmanship for a period of 2(two) years and is a
complete “bumper to bumper” warranty including the spray gun , the high
pressure hose and all accessories from the date of purchase. The warranty
is not transferable or assignable. This warranty covers replacement parts.
This limited warranty applies only to products used in consumer applica-
tion and is void in rental or any commercial application. Reasonable care
must be used in conformity with operation and maintenance instruction in
the owner’s manual and quick start guide. Failure to follow these instruc-
tions will void this warranty.
For customer service, call 1-800-505-8311 from 8 a.m. to 8 p.m. EST
Monday through Friday.
AFTER SALES SUPPORT
USA
USA
High Pressure Washer
1800 505 8311 [email protected]
14
Warranty
Contenido
Descripción general / Contenido ................................................ 16
Lugar de trabajo / Seguridad eléctrica ........................................ 17
Instrucciones/Funcionamiento .................................................... 18
Registro de seguridad .......................................................... 18
Rango de aplicación ............................................................ 19
Especicaciones técnicas principales .................................. 19
Principio de funcionamiento ................................................ 19
Reglas de funcionamiento .................................................. 20
Mantenimiento ................................................................... 24
Solución de problemas ............................................................... 25
Vista desglosada y lista de piezas ............................................ 26
Garantía ...................................................................................... 27
Tarjeta de garantía ..................................................................... 30
1
3
2
4
ADVERTENCIA
1800 505 8311 [email protected]
Descripción general / Contenido
16
SERVICIO POSVENTA
USA
USA
Hidrolavadora de alta presión
Descripción general
El conjunto incluye las siguientes piezas:
1 Hidrolavadora de alta presión
5 Accesorios: rociador, lanza de chorro, limpiador, botella de detergente,
adaptador de entrada
1 Manual de instrucciones
1 Tarjeta de garantía
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Conjunto de la lanza (Regulador de presión)
Conjunto de la pistola
Salida de agua (Conexión a manguera de alta presión)
Manguera de alta presión
1
2
3
4
Contenidos / Seguridad eléctrica
LEA Y COMPRENDA
EL MANUAL DE INSTRUCCIONES
¡No utilizar el aparato sin antes leer la hoja de instrucciones!
DOBLE AISLAMIENTO
4005977
HP9502A
APROBADO
POR ETL
1800 505 8311 [email protected]
17
SERVICIO POSVENTA
USA
USA
Hidrolavadora de alta presión
Lugar de trabajo / Seguridad eléctrica
Al utilizar este producto, siempre se deben tener en cuenta
precauciones básicas, entre ellas:
1. No utilice el aparato sin antes leer la hoja de instrucciones.
2. No dirija el chorro hacia personas para evitar riesgo de ingesta o lesión.
3. ADVERTENCIA: Este aparato está diseñado para su uso con el agente
limpiador suministrado o recomendado por el fabricante. El uso de otros
agentes limpiadores o químicos podrían afectar negativamente la
seguridad del aparato.
4. ADVERTENCIA: No utilice el aparato dentro del rango de otras personas
a menos que utilicen vestimenta de protección.
5. ADVERTENCIA: Los chorros de alta presión pueden ser peligrosos si se
los usa de forma indebida. No se debe dirigir el chorro hacia personas,
animales, equipo eléctrico conectado o hacia el aparato mismo.
6. No dirija el chorro hacia usted mismo u otros para limpiar la vestimenta
o el calzado.
7. Desconecte el aparato del suministro eléctrico antes de realizarle
mantenimiento.
8. No permita que niños o personas no instruidas utilicen la hidrolavadora.
9. Para garantizar la seguridad del aparato, utilice solo piezas de repuesto
originales del fabricante o aprobadas por este.
10. ADVERTENCIA: Las mangueras de alta presión, las abrazaderas y los
acoples son importantes para el uso seguro del aparato. Utilice
solamente mangueras, abrazaderas y acoples recomendados por el
fabricante.
11. No utilice el aparato si un cable de alimentación u otras piezas
importantes del aparato (dispositivos de seguridad, mangueras de alta
presión, pistola) están dañados.
12. ADVERTENCIA: El uso de cables de extensión no adecuados puede ser
peligroso.
13. Si utiliza un cable de extensión, la clavija y el tomacorriente deben ser a
prueba de agua.
14. Si el cable de alimentación está dañado, debe ser reemplazado por el
fabricante, su servicio técnico o personal cualicado equivalente para
evitar riesgos.
15. Es necesaria una atenta supervisión cuando se usa el producto cerca
de niños para reducir el riesgo de lesiones.
16. Sepa cómo detener el producto y liberar la presión con rapidez y
conozca bien todos los controles.
17. Manténgase alerta: mire lo que esté haciendo.
ADVERTENCIA
1800 505 8311 [email protected]
Registro de seguridad
18
SERVICIO POSVENTA
USA
USA
Hidrolavadora de alta presión
No dirija el chorro hacia personas para evitar riesgo de
ingesta o lesión.
18. No opere el producto si está cansado o bajo la inuencia de alcohol
o drogas.
19. No permita que haya personas en el área de funcionamiento.
20. No se estire demasiado ni se pare sobre una supercie inestable.
Mantenga una postura y equilibrio adecuados en todo momento.
21. Siga las instrucciones de mantenimiento especicadas en el manual.
22. Este producto solo debe conectarse a un tomacorriente protegido por
un interruptor diferencial (GFCI).
23. Siempre utilice vestimenta de protección y gafas protectoras. El chorro
de agua puede disparar partículas sueltas y otros desechos a gran
velocidad. Use protección auditiva.
25. La conexión eléctrica de alimentación la debe realizar un electricista
calicado.
26. Utilice el aparato a al menos 32 °F (0 °C).
1. Registro de seguridad
1.1 Lea todo el contenido del manual antes de poner el aparato en
funcionamiento: cumpla con el registro de seguridad para evitar
accidentes y daños.
1.2 Verique que la tensión de la hidrolavadora corresponda a la fuente de
alimentación. De acuerdo con esta normativa, debe haber un interruptor
de protección instalado.
1.3 Corte el suministro mientras la hidrolavadora no esté funcionando.
1.4 No utilice la hidrolavadora bajo la lluvia; no debe ingresar agua a la
máquina para evitar daños al aislamiento.
1.5 Mantenga los cables de alimentación alejados de fuentes de calor y
objetos losos para evitar daños.
1.6 Nunca inserte o jale del enchufe, ni intente mover la máquina, con las
manos húmedas.
1.7 Debe reemplazar de inmediato la manguera de alta presión si está
dañada. Utilice solamente mangueras y conexiones recomendadas por
el fabricante.
1.8 Mantenga esta máquina alejada de ácidos concentrados, solventes y
materiales inamables o explosivos como aceite caliente, petróleo y
acetona.
1.9 Nunca obstruya el gatillo en posición durante el funcionamiento.
1.10 No hay válvulas de seguridad ajustables; cuando la presión de agua
sea suciente, la válvula de seguridad se abrirá automáticamente.
ADVERTENCIA
SERVICIO POSVENTA
USA
USA
Hidrolavadora de alta presión
1800 505 8311 [email protected]
Usos / Datos técnicos /
Principio de funcionamiento
19
2. Rango de aplicación
2.1 Utilice el aparato para limpiar varios tipos de vehículos como
automóviles, motos y bicicletas.
2.2 Limpie las paredes exteriores de edicios, el suelo y el jardín.
3. Especificaciones técnicas principales
Artículo ALDI # 50501
Modelo de fabricación # HP9502A
120 V CA 60 Hz 13 A, 1300 PSI
Presión máxima: 1600 PSI
Presión de entrada: 80 PSI
Flujo nominal: 1.35 GPM
Utilizar solo agua fría
4. Principio de funcionamiento. Características estructurales
4.1 Principio de funcionamiento
El motor impulsa directamente el eje de transmisión de la bomba de pistón.
La placa de leva inclinada cambia el movimiento giratorio del eje de
transmisión en movimiento horizontal. Cuando el pistón regresa, la válvula
de salida de agua se cierra y crea un vacío. Cuando la válvula de entrada
de agua se abre, el agua entra al cilindro; cuando el pistón se mueve hacia
adelante, la válvula de entrada de agua se cierra y aumenta la presión de
agua en el cilindro. Cuando se abre la válvula de salida de agua, el agua a
alta presión saldrá por la manguera.
4.2 Características estructurales
4.2.1 El motor monofásico impulsa directamente la bomba de pistón axial
de 3 cilindros a través del eje. La hidrolavadora posee una estructura
compacta, es pequeña, de apariencia artística y de funcionamiento
conable.
4.2.2 Como la hidrolavadora es ligera, es fácil de transportar.
SERVICIO POSVENTA
USA
USA
Hidrolavadora de alta presión
1800 505 8311 [email protected]
Reglas de funcionamiento: Preparación
20
4.2.3 La bomba de la hidrolavadora tiene la función de descarga
automática. Cuando se cierra el gatillo, la válvula de descarga se abre
y el agua regresa al lado de succión de la bomba, por lo tanto la
hidrolavadora reduce el consumo de agua y electricidad.
4.2.4 Utilice aceite para máquina N.° 32 y aceite lubricador de alta
temperatura en la bomba.
5. Reglas de funcionamiento
5.1 Preparación
5.1.1 Si al desembalar la unidad descubre daños ocasionados por el
transporte, comuníquese con el vendedor.
5.1.2 Verique que la lista de embalaje y los documentos con información
sean los correctos;
consérvelos.
5.1.3 Inserte la manija grande en
la unidad principal, junto
a las 3 ranuras.
5.1.4 Gire el conector macho de entrada
en la manguera de entrada y ajuste.
Figura 1
Figura 2
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
Workzone 50501 User manual
- Category
- High-pressure cleaners
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- español: Workzone 50501 Manual de usuario
Related papers
Other documents
-
Surtek HL732 Owner's manual
-
Koblenz HL270V Installation guide
-
-
Kärcher HD 10/25 S USA User manual
-
PRETUL HILA-1800P Owner's manual
-
-
-
Sistema CLEAN MASTER 1600 TSS Owner's manual
-
Pope 101HPW1500 User manual
-
Power Craft High-pressure cleaner Operating Instructions Manual
