DTS DELTA R FULL COLOR User manual

Type
User manual
DELTA RDELTA R
GB
User Manual Rel 1.1
www.bluelight.at
2
DELTA R
Le informazioni contenute in questo documento sono state attentamente redatte e controllate. Tuttavia
non è assunta alcuna responsabilità per eventuali inesattezze. Tutti i diritti sono riservati e questo
documento non può essere copiato, fotocopiato, riprodotto per intero o in parte senza previo consenso
scritto della D.T.S .
DTS si riserva il diritto di apportare senza preavviso cambiamenti e modifiche estetiche , funzionali o di
design a ciascun proprio prodotto. D.T.S non assume alcuna responsabilità sull’uso o sull’applicazione dei
prodotti o dei circuiti descritti.
The information contained in this publication has been carefully prepared and checked. However, no
responsibility will be taken for any errors. All rights are reserved and this document cannot be copied,
photocopied or reproduced, in part or completely, without prior written consent from D.T.S.
D.T.S. reserves the right to make any aesthetic, functional or design modifications to any of its products
without prior notice. D.T.S. assumes no responsibility for the use or application of the products or
circuits described herein.
Les informations contenues dans le présent manuel ont été rédigées et contrôlées avec le plus grand soin.
Nous déclinons toutefois toute responsabilité en cas d'éventuelles inexactitudes. Tous droits réservés. Ce
document ne peut être copié, photocopié ou reproduit, dans sa totalité ou partiellement, sans le
consentement préalable de .
se réserve le droit d'apporter toutes modifications et améliorations esthétiques, fonctionnelles ou
de design, sans préavis, à chacun de ses produits. décline toute responsabilité sur l'utilisation ou
sur l'application des produits ou des circuits décrits.
D.T.S
D.T.S.
D.T.S.
Las informaciones contenidas en este documento han sido cuidadosamenteredactadas y
controladas. Con todo, no se asume ninguna responsabilidad por eventuales inexactitudes.
Todos los derechos han sido reservados y este documento no puede ser copiado, fotocopiado o
reproducido, total o parcialmente, sin previa autorizaciónescrita de
se reserva el derecho a aportar sin previo aviso cambios y modificaciones de carácter
estético, funcional o de diseño a cada producto suyo. no se asume responsabilidad de
ningún tipo sobre la utilización o sobre la aplicació
n de los productos o de los circuitos descritos.
D.T.S.
D.T.S.
D.T.S.
www.bluelight.at
3
DELTA R
INDEX:
1- TECHNICAL FEATURES 4
2- IMPORTANT SAFETY INFORMATION 5
2.1 Fire prevention
2.2 Prevention of electric shock
2.3 Protection against direct light radiation
2.4 Safety
2.5 Level of protection against the penetration of solid and liquid matter
3- VOLTAGE AND FREQUENCY 6
4- INSTALLATION 6
4.1 Safety cable
4.2 Risk of fire
4.3 Ambient temperature
5- MAINS CONNECTION 7
5.1 Protection:
6- DMX SIGNAL CONNECTION 7
6.1 DMX Addresses
6.2 Selecting the DMX address
7- MOVEMENT 8
8- DISPLAY FUNCTIONS 9
9- OPENING UP THE PROJECTOR HOUSING 19
9.1 Arms
9.2 base
10- CHANGHING THE LENSES 20
11- PERIODIC CLEANING 21
12- PERIODIC CONTROLS
13- DMX PROTOCOL 22
www.bluelight.at
1- TECHNICAL FEATURES
40 RGB Full Color LEDs/ LED power 3W
Total luminous flux 2.800 Lumens
RGB color generation / 16 million colours
Colour temperature variable on a linear range (3.200°K÷5.500°K)
No infrared emission / no ultraviolet emission
LEDs average lifespan: 100.000 hours
Optical units can be interchanged by users (narrow / medium /wide)
Interface: OLED display + 4 buttons / infrared remote control
Control signals: USITT DMX 512 USITT serial digital signals
15 DMX channels
Independent operation (Master / Slave)
Programmable automated playback (7 days)
Movement on 3 axes (Pan 320° /Tilt1 130° / Tilt2 180°)
Safety-locking system
IP65 protection level
Professional HARTING / ILME sockets (IP65 protection rating)
Full range AC 90-270V, 50-60Hz power supply
Operating ambient temperature -10° / 40°
Weight: 20 Kg
ACCESSORIES
Lenses set narrow° (cod. 03.LK.008)
Lenses set medium° (cod. 03.LK.001)
Lenses set wide° (cod. 03.LK.002)
Flight case for 1 DELTA (cod. 0521C029)
Flight case for 2 DELTA (cod. 0521C030)
Safety wire (3mm x 60 cm), Ring spring catch (max. capacity load 60Kg) (Cod. 0521A010)
“C” Clamp GQUICK with “Fast Lock” connection ¼ turn (max. load 80Kg) (cod. 0521A014)
Dimensions (LxWxH)
projector 430 x 330 x 570 mm
Weight20 Kg (motorized version)
Packaging Dimensions (LxWxH)
870 x 410 x 530 mm
Weight 24 Kg (motorized version)
4
DELTA R
www.bluelight.at
2- IMPORTANT SAFETY INFORMATION
2.1 Fire prevention:
-Never locate the fixture on any flammable surface.
-Minimum distance from flammable materials: 1 m.
-Minimum distance from the closest illuminable surface: 1 m.
-Replace any blown or damaged fuses only with those of identical value. Refer to the wiring diagram if
there is any doubt.
-Connect the projector to mains power via a thermal magnetic circuit breaker.
2.2 Prevention of electric shock:
-High voltage is present inside the unit. Isolate the projector from the mains supply prior to performing
any function which involves touching the inside of the unit.
-The level of technology inherent in the DELTA R requires the assistance of specialised personnel for all
servicing.Please refer to an authorised DTS service centre.
-A good earth connection is essential for proper functioning of the projector.
Never connect the unit without proper earth connection.
-The fixture should be located in places with a good air ventilation.
2.3 Protection against direct light radiation:
-Never turn the unit on if any of the lenses or the glass lenses protection is damaged.
-Never look directly the leds when they are on.
2.4 Safety:
-The projector should always be installed with bolts, clamps and other tools that are capable of
supporting the weight of the unit.
-Always use a second safety chain to sustain the weight of the unit in case of the failure of the main
fixing point.
-The external surface of the unit, at various points, may exceed 80°C. Never handle the unit until it’s on.
-Never install the fixture in an enclosed area lacking sufficient air flow.
-The ambient temperature should not exceed 45°C.
2.5 Level of protection against the penetration of solid and liquid matter:
-The projector is classified as an ordinary appliance and its protection level against the penetration of
solid and liquid matter is IP 65.
5
DELTA R
www.bluelight.at
.
3- VOLTAGE AND FREQUENCY:
Delta R can operate at 90-270V, 50 or 60 Hz.
4- INSTALLATION:
4.1 Safety cable:
4.2 Risk of fire:
Each fixture produces heat and must be installed in a well-ventilated position. The minimum
recommended distance from flammable material is 1m. Minimum distance from the object being
illuminated is 30 cm.
Delta R may be either floor or ceiling mounted.
For floor mounting installations, the unit is supplied with four rubber mounting feet on the base.
For ceiling mounted installations, we reccomend the use of appropriate clamps to fix the unit to the
mounting surface.
The supporting structure from which the unit is hung should be capable of bearing the weight of the
unit, as should any clamps used to hung it. The structure should also be sufficiently rigid so as not to
move or shake whilst the Delta R is moving.
Four quarter turn fast locks placed on the base of the units,allows by using the two fast lock C clamps
provided in the box, to fix the unit in any position.
.
We recommend the use of a safety cable or chain connected to the Delta R and to the suspension truss
in order to avoid the fixture accidentally falling should the main fixing point fail. Make sure that the iron
cable or chain can bear the weight of the entire unit.
You may attach the safety chain to the holes located on the base of the fixture, as shown in the picture
below.
6
DELTA R
SAFETY CABLE
FIXING POINT
www.bluelight.at
4.3 Ambient temperature:
The projector should never be installed in places that lack a constant air flow. The ambient temperature
should NOT exceed 45°C.
5- MAINS CONNECTION:
Delta R can operate at 90-270V, 50 or 60Hz.
For connection purposes, ensure that your plug can handle at least 300W power consuption.
Strict adherence to regulatory norms is strongly
Recommended.
5.1 Protection:
The use of a thermal magnetic circuit breaker is recommended for each Delta R.
A good earth connection is essential for the correct operation of the projector.
6- DMX SIGNAL CONNECTION:
The unit operates using a digital DMX 512 (1990) signal. Connection between the control box and the
projector or between projectors must be carried out using a two pair screened ø0.5 mm cable and a
CANNON XLR 5 or 3 pole connector.
P.S:
If the display showing the DMX address flashes, then one of the following errors has occurred:
- DMX signal not present
- DMX reception problem
Ensure that the conductors do not touch each other.Do not connect the cable ground to the XLR chassy
The plug housing must be isolated. Connect the mixer signal to the DMX IN projector plug and connect
it to the next projector by connecting the DMX OUT plug on the first projector to the DMX IN plug of the
second one.
In this way, all the projectors are cascade connected.
5
3
4 2
1
1=GND
2=DATA-
3=DATA+
CONTROLLER
S T A N D A R D
DM X 5 1 2
OUT
IN
OUT
7
DELTA R
Electronic ballast
90-270V 50 / 60Hz
OUT OUT
IN
IN
DMX IN
DMX OUT
FUSE: T 3,15A
MAINS
www.bluelight.at
8
DELTA R
6.1 DMX Addresses:
DELTA R have 15 DMX control channels.
Here below are described the DMX channels addressing for the controller:
Projector 1 A001
Projector 2 A016 If you want to select the next projector, just add “15”
Projector 3 A031
….. A….
projector 6 A091
6.2 Selelcting the DMX address:
1) Press the UP-DOWN key until you reach the required DMX address. The numbers on the display will
start to flash (but the new DMX address hasn't yet been set).
2) Press ENTER to confirm your selection. The numbers on the display will stop flashing and the
projector is now controlled by the new DMX address.
TIPS: if you keep pushed the UP or DOWN keys, the channels are calculated more quickly and you get
a faster selection.
7- Movement
The projector has a maximum movement of 320° for Pan,180° for Tilt 1 and 135° for tilt 2
(7 mechanical steps 22,5° each).
DO NOT place any obstructions in the path of the projector's movement.
MENU
ENTER
DOWN
UP
Tilt 2 mechanical regulation
TILT1 180°
PAN 320°
TILT2 135°
www.bluelight.at
8- DISPLAY FUNCTIONS
9
DISPLAY FUNCTIONS
The DELTA R display panel shows all the available functions . Using these functions, it is possible
to change some of the parameters and add some functions. Changing the DTS setting can vary the
functions of the unit so that it does not respond to the DMX 512 used to control it. Carefully
follow the instructions below before carrying out any variations or selections.
DELTA R
1)GLOBAL SETTING MENU
LANGUAGE
DEFAULT PAGE
SECURITY
DEFAULT SETTING
SET DATE
SET TIME
REMOTE CONTROL ID
UPDATE
ABOUT
2)MODE SETTING MENU
DMX MODE
MASTER MODE
SLAVE MODE
IR MODE
TEST MODE
TWILIGHT MODE
3)MOVING HEAD SETUP MENU
PAN MIN
PAN MAX
TILT MIN
TILT MAX
CALIBRATE PAN
CALIBRATE TILT
INVERT PAN
INVERT TILT
SWAP PAN & TILT
ENCODER
RESET PAN & TILT
SPEED PAN & TILT
4)LED SETUP MENU
COLOUR MODE
WHITE BALANCE
BOOST DRIVING
MIN RGB
MAX RGB
5)DIPLAY SETUP MENU
CONTRAST
DISPLAY FLIP
SCREEN SAVER SELECT
SCREEN SAVER ENABLE
6)MEASURE MENU
LIFE
DMX
VOLTAGE
TEMPERATURA
TWILIGHT
www.bluelight.at
10
DELTA R
1)GLOBAL SETTING MENU
LANGUAGE
DEFAULT PAGE
SECURITY
DEFAULT SETTING
SET DATE
SET TIME
REMOTE CONTROL ID
UPDATE
ABOUT
Up-Down
Menu
A001
GLOBAL SETTING
ENTER
Language
Up-Down
Up-DownENTER
Up-Down
LANGUAGE SELECTION
This menu allow to set the language
English = Default
Default Page
Up-Down
Up-DownENTER
Up-Down
DEFAULT PAGE SELECTION
This menu allow to set the
visualisation for the start up page
Four Digit = DMX address
visualisation
ENTER
Status = DMX / Color Mode / Boost
Power / Security
ENTER
ENTER
Security
Up-Down
Up-DownENTER
SECURITY PASSWORD
This menu allow to select a security
password to lock the user’s settings
Default 0000 = no password
ENTER
Up-Down
Default Setting
Up-Down
DEFAULT SETTINGS
This menu allow to set the unit to
the company settings
Set Date
Up-Down
Up-DownENTER
25-12-06 Sunday
DATE SETTING
This menu allow to set the day of
the week the month and the year
ENTER
ENTER
GAME,TIMER and WHITE SETTING
will not be changed
ENTER
Set Language
English
Italian
Set Default Page
Four Digit
Status
A001
Security Unlocked
Enter Security Code
0 0 0 0
Confirm Security Code
0 0 0 0
Set Default
Yes
No
Up-Down
ENTER
Up-Down
Set Date
Date setting for Stand Alone mode
www.bluelight.at
11
DELTA R
Remote control ID
Up-Down
Up-Down
ENTER
REMOTE CONTROL ID SETTING
This menu allow to set the ID of the
Remote control
ENTER
Update
Up-Down
Up-DownENTER
UPDATE MENU
This menu allow to upgrade the
uni’s software by computer or
remote control
ENTER
ENTER
Update the unit’s software from PC by
using the Remote Control
Update the unit’s software from PC by
cable
Download
Up-Down
Up-DownENTER
DOWNLOAD MENU
This menu allow to save unit’s
programs into computer
ENTER
ENTER
Download the unit’s program to PC by
using the Remote Control
Download the unit’s program to PC by
cable
ABOUT
Up-Down
ENTER
About DELTA R
Master PCB 0514L019
Loader Version 1.00
HW Version 1.00
SW Version 1.00b14
Pan&Tilt PCB 0506312
PAn&Tilt Version 1.10
ABOUT MENU
This menu show informations about
unit’s hardware and software
Up-Down
ENTER
TIME SETTING
This menu allow to set the unit’s on
board clock for STAND ALONE
MODE
Set Time
Up-Down
Up-DownENTER
Real time internal clock setting
ENTER
Set Time
15-10-06
Set ID Remote Control
ID : 005
Remote control ID setting
Select UPDATE Mode
With REMOTE CONTROL
Direct to PC
Select DOWNLOAD Mode
With REMOTE CONTROL
Direct to PC
Unit’s Hardware and software infos
www.bluelight.at
12
DELTA R
2)MODE SETTING MENU
DMX MODE
MASTER MODE
SLAVE MODE
IR MODE
TEST MODE
TWILIGHT MODE
A001
MODE SETTINGS
Up-Down
Menu
ENTER
DMX Mode
Up-Down
Up-DownENTER
DMX ADDRESS SELECTION
This menu allow to set the unit’s
DMX address.
Master Mode
The MASTER unit send DMX signal to
the SLAVE units
ENTER
Up-Down
Up-DownENTER
MASTER MODE SETTING
This menu allow to set Delta R as
master unit.(No DMX must be
present on unit’s DMX input panel)
Slave Mode
ENTER
The SLAVE unit receive DMX signal
from the MASTER unit
Up-Down
Up-DownENTER
SLAVE MODE SETTING
This menu allow to set the Delta R
as slave unit
Set Address DMX
001
Address range 001-489
ENTER
Set Master Mode
Yes
No
Set Slave Mode
Yes
No
IR Mode
ENTER
The unit is controlled by the infrared
remote control
Up-Down
Up-DownENTER
IR MODE SETTING
This menu allow to control the unit
with an infrared remote control
Up-Down
Set IR Mode
Yes
No
Test Mode
Yes
No
Test Mode
Preprogrammed test sequence
ENTER
Up-Down
Up-DownENTER
TEST MODE MENU
This menu allow to test all the
unit’s funtions
Up-Down
www.bluelight.at
13
DELTA R
TWILIGHT MODE
Up-Down
Up-DownENTER
TWILIGHT MODE MENU
This menu allow to set the Twilight
Level
ENTER
The unit is switched on and off at
the desired twilight value
3)MOVING HEAD SETUP MENU
PAN MIN
PAN MAX
TILT MIN
TILT MAX
CALIBRATE PAN
CALIBRATE TILT
INVERT PAN
INVERT TILT
SWAP PAN & TILT
ENCODER
RESET PAN & TILT
SPEED PAN & TILT
Up-Down
Menu
A001
MOVING HEAD SETUP
ENTER
Up-Down
Up-DownENTER
PAN MINIMUM POSITION
This menu allow to set the Pan
minimum position (Default =000)
Pan Max
Up-Down
Up-DownENTER
PAN MAXIMUM POSITION
This menu allow to set Pan
maximum position (Default = 255)
Pan Min
Up-Down
Up-DownENTER
TILT MINIMUM POSITION
This menu allow to set the Tilt
minimum position in degrees
(Default =000)
Tilt Min
Set Twilight Level
001
Setting Pan Min
Pan Min : 000
Range 000-255
Default = 000
ENTER
Setting Pan Max
Pan Man : 000
Range 255-000
Default = 255
ENTER
Setting Tilt Min
Tilt Min : 000
Range 000-255
Default = 000
ENTER
www.bluelight.at
14
DELTA R
Calibrate Pan
Up-Down
Up-DownENTER
PAN CALIBRATION
This menu allow to calibrate Pan
home position (Default = 105)
Calibrate Tilt
Up-Down
Up-DownENTER
TILT CALIBRATION
This menu allow to calibrate Tilt
home position (Default = 128)
Invert Pan
Up-Down
Up-DownENTER
PAN INVERTION
This menu allow to set the Pan
movement.
Normal or Inverted
Invert Tilt
Up-Down
Up-DownENTER
TILT INVERTION
This menu allow to set the Tilt
movement.
Normal or Inverted
Swap Pan&Tilt
Up-Down
Up-DownENTER
PAN&TILT SWAP
This menu allow to invert the
control of Pan with the control of
Tilt.
IMPORTANT: (During PAN/TILT MIN,PAN/TILT MAX and PAN/TILT CALIBRATE setting,PAN/TILT INVERT and PAN/TILT SWAP are disabled
Encoder
Tilt Max
Setting Tilt Max
Tilt Max : 000
Range 000-255
ENTER
Up-Down
Up-DownENTER
TILT MAXIMUM POSITION
This menu allow to set the Tilt
maximum position (Default = 255)
Calibrating Pan
Pan : 105
Calibrating Tilt
Tilt : 105
Range 000-255
ENTER
Set PAN INVERTION
Pan : Normal
Actual Normal
Pan movement Normal or Inverted
Default = Normal
ENTER
Set TILT INVERTION
Tilt : Normal
Actual Normal
Tilt movement Normal or Inverted
Default = Normal
ENTER
Set Pan/Tilt SWAPPING
Swap : Normal
Actual Normal
Pan control inverted with Tilt control
and vice versa
Dfault = Normal
ENTER
Set Encoder Status
Encoder : Active
Actual Active
Pan/Tilt auto-repositioning system
enabled or disabled
Default = Active
ENTER
Up-Down
Up-DownENTER
ENCODER SETTING
This menu allow to enable/disable
the auto-repositioning function for
Pan and Tilt
Range 255-000
Default = 255
ENTER
www.bluelight.at
15
DELTA R
4)LED SETUP MENU
COLOUR MODE
WHITE BALANCE
BOOST DRIVING
MIN RGB
MAX RGB
Up-Down
Menu
A001
LED SETUP
ENTER
Set Colour Mode
RGB
CMYK
HSV
Actual RGB
Up-Down
Up-DownENTER
COLOUR MODE
This menu allow to select the
LED’S colour mode control system
between RGB, CMYK or HSV
Colour Mode
ENTER
RGB Mode (Default)
Ch7 = Dimmer / Ch8 = Red Ch9= Green
/ Ch10= BLue
CMYK Mode
Ch7 = Black / Ch8 = Cyan
Ch9= Magenta / Ch10= Yellow
HSV Mode
Ch7 = Nu / Ch8 = Hue
Ch9= Saturation / Ch10= Value
Setting WHITE
RED 255
GREEN 255
BLUE
Up-Down
Up-DownENTER
WHITE BALANCE
This menu allow to select the levels
for Red,Green and blue obtaining a
custom White
White balance
ENTER
255
Setting LED BOOST
BOOST Status
Active
Warning TEMPERATURE
PROTECTION ACTIVATED
Up-Down
Up-Down
ENTER
BOOST DRIVING
This menu allow to increase the
LED’s current from 350mA to 500
mA
Boost Driving
ENTER
The Custom White can be
Recall by setting DMX channel 11
(WHITE) in the range 172-213
Whit BOOST active,the LED’s current is
setted to 500mA (30%more gain).
Default = Disable
NTC thermal protection active.
Resetting Pan & Tilt
PRESS ENTER
To RESET Pan & Tilt
PAN&TILT RESET
This menu allow to reset Pan and
Tilt Motors
Reset Pan & Tilt
Up-Down
ENTER
Pan &Tilt motors reset
ENTER
Set SPEED MAX P&T
Speed MAX % 100
PAN & TILT MAXIMUM SPEED
This menu allow to set the
maximum speed for Pan & Tilt
movement.
Speed Pan & Tilt
Up-Down
Up-DownENTER
Pan&Tilt maximum motor speed
Selectable between 25-100%
ENTER
www.bluelight.at
16
DELTA R
5)DIPLAY SETUP MENU
CONTRAST
DISPLAY FLIP
SCREEN SAVER SELECT
SCREEN SAVER ENABLE
Up-Down
Menu
A001
DISPLAY SETUP MENU
ENTER
Contrast 7
0 1 2 3 4 5 6 7 8 9
Up-Down
Up-Down
ENTER
DISPLAY CONTRAST
This menu allow to select display’s
contrast level.
Contrast
Flip Select
Up-Down
Up-Down
ENTER
DISPLAY FLIP
This menu allow to reverse display's
reading depending on the
mounting position
(On the ground or suspended).
Flip Display
A
Up-Down
Up-Down
ENTER
SCREEN SAVER SELECT
This menu allow to select between
different screen savers
Screen saver select
Setting RGB Max
Max RED : 000
Max GREEN: 000
Max BLUE
These settings have priority on Master
Dimmer (DMX channel 7)
RGB MAXIMUM VALUES
This menu allow to select the
maximum levels for Red,Green and
blue
: 000
Max RGB
ENTER
Up-Down
Up-DownENTER
Setting RGB Min
Min RED : 000
Min GREEN : 000
Min BLUE
These settings have priority on Master
Dimmer (DMX channel 7)
RGB MINIMUM VALUES
This menu allow to select the
minimum levels for Red,Green and
blue
: 000
Min RGB
ENTER
Up-Down
Up-DownENTER
Range = 0-9
ENTER
Default = On the ground
ENTER
Not yet implemented
ENTER
www.bluelight.at
17
DELTA R
6)MEASURE MENU
LIFE
DMX
VOLTAGE
TEMPERATURE
TWILIGHT
Up-Down
Menu
A001
MEASURE MENU
ENTER
Up-Down
Up-Down
ENTER
LIFE TIME
This menu show the total UNIT LIFE TIME
(reset not possible) and the RGB life
TIME (reset possible)
Life
Measure Life
Delta R Total LIFE
Days Hours Min Sec
ENTER
Total Unit Life Time
Reset not possible
ENTER
To resed Red life time,keep pushed
Enter button for more than 5
seconds
SCREEN SAVER ENABLE
This menu allow to enable the
selected screen saver.
Not yet implemented
Screen saver enable
ENTER
Up-Down
Up-DownENTER
ENTER
To resed Green life time,keep
pushed Enter button for more than
5 seconds
ENTER
To resed Blue life time,keep
pushed Enter button for more than
5 seconds
UP/DW Change Measure
1 19 47 55
Measure Life
Delta R RED LIFE
Days Hours Min Sec
UP/DW Change Measure
0 5 22 30
Measure Life
Delta R GREEN LIFE
Days Hours Min Sec
UP/DW Change Measure
0 4 37 15
Measure Life
Delta R BLUE LIFE
Days Hours Min Sec
UP/DW Change Measure
0 4 06 53
www.bluelight.at
Up-Down
Up-DownENTER
DMX
This menu show the DMX rate and
channels level
Dmx
18
DELTA R
Up-Down
Up-DownENTER
VOLTAGE
This menu show the different Voltage
levels inside the unit
Voltage
Measure TEMPERATURE
Celsius 20,5
Up-Down
Up-DownENTER
TEMPERATURE
This menu show the NTC sensor
temperature.
Temperature
ENTER
LED’s temperature monitor
Measure TWILIGHT
Value : 0314
Up-Down
Up-DownENTER
TWILIGHT
This menu show thetwilight level.
Twilight
ENTER
Light sensor Twilight level
(Located on the front of the unit)
Not yet implemented
ENTER
Not yet implemented
ENTER
Not yet implemented
ENTER
19
DELTA R
9- OPENING UP THE PROJECTOR HOUSING:
It is possible to inspect the inside of the projector by removing the covers as shown below.
Attention: REMOVE MAINS POWER PRIOR TO ACCESSING THE PROJECTOR'S INTERNAL
COMPONENTS.
Proceed as per the pictures below
9.1- Arms
9.2- Base
Remove these two screws on both arm sides
Remove the 12 screws located on the base
www.bluelight.at
20
DELTA R
10- CHANGHING THE LENSES
To change the lenses set, proceed as per the pictures below
Optical Lenses set can be interchanged by users.
Three different models are available: (narrow / medium /wide)
Lenses set narrow (cod. 03.LK.008)
Lenses set medium (cod. 03.LK.001)
Lenses set wide (cod. 03.LK.002)
Remove these 12 screws on both
sides of the rear head assembly
Remove the top head cover
Remove these 8 screws and change
the panel
www.bluelight.at
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25

DTS DELTA R FULL COLOR User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages