PPC | 67P-RTP0-KB | Manual
HB160 | PPC | 67P-RTP0-KB | en | 23-20
HMI
Panel PC - PPC015 IE
67P-RTP0-KB_000_PPC015IE,3,EN - © 2023
YASKAWA Europe GmbH
Philipp-Reis-Str. 6
65795 Hattersheim
Germany
Tel.: +49 6196 569-300
Fax: +49 6196 569-398
Email: [email protected]
Internet: www.yaskawa.eu.com
Table of contents
1 General.................................................................................................................... 4
1.1 Copyright © YASKAWA Europe GmbH............................................................ 4
1.2 About this manual............................................................................................. 5
1.3 Safety information............................................................................................. 5
2 Hardware description............................................................................................. 7
2.1 Safety information for users.............................................................................. 7
2.2 Properties......................................................................................................... 8
2.3 Structure........................................................................................................... 9
2.3.1 Overview........................................................................................................ 9
2.3.2 Interfaces..................................................................................................... 11
2.3.3 Memory management.................................................................................. 15
2.4 Dimensions..................................................................................................... 16
2.5 General data................................................................................................... 17
2.6 Use in difficult operating conditions................................................................ 18
2.7 Technical data................................................................................................. 18
2.7.1 67P-RTP0-KB.............................................................................................. 18
3 Deployment Panel PC.......................................................................................... 22
3.1 Installation...................................................................................................... 22
3.2 Installation of the CFast card.......................................................................... 23
3.3 Commissioning............................................................................................... 24
3.3.1 Startup-Manager.......................................................................................... 25
3.3.2 Firmware update.......................................................................................... 29
3.4 Connection to a PLC system.......................................................................... 30
3.5 Operating system Windows 10 IoT Enterprise............................................... 31
3.5.1 General........................................................................................................ 31
3.5.2 Structure...................................................................................................... 32
4 BIOS Setup............................................................................................................ 38
4.1 Overview......................................................................................................... 38
4.2 Main................................................................................................................ 39
4.3 Advanced........................................................................................................ 40
4.4 Chipset........................................................................................................... 50
4.5 Boot................................................................................................................ 55
4.6 Security........................................................................................................... 56
4.7 Save and Exit................................................................................................. 58
5 Industrial security and installation guidelines.................................................. 59
5.1 Industrial security in information technology................................................... 59
5.1.1 Protection of hardware and applications..................................................... 60
5.1.2 Protection of PC-based software................................................................. 61
5.2 Installation guidelines..................................................................................... 61
5.2.1 Basic rules for the EMC-equitable assembly of installations....................... 61
5.2.2 EMC-equitable assembly............................................................................. 65
5.2.3 EMC-equitable cabling................................................................................ 66
5.2.4 Special precautions providing high noise immunity..................................... 69
5.2.5 Checklist for the EMC-compliant installation of controllers.......................... 70
Appendix............................................................................................................... 71
A History of changes............................................................................................ 73
HMI Table of contents
HB160 | PPC | 67P-RTP0-KB | en | 23-20 3
1 General
1.1 Copyright © YASKAWA Europe GmbH
This document contains proprietary information of Yaskawa and is not to be disclosed or
used except in accordance with applicable agreements.
This material is protected by copyright laws. It may not be reproduced, distributed, or
altered in any fashion by any entity (either internal or external to Yaskawa) except in
accordance with applicable agreements, contracts or licensing, without the express
written consent of Yaskawa and the business management owner of the material.
For permission to reproduce or distribute, please contact: YASKAWA Europe GmbH,
European Headquarters, Philipp-Reis-Str. 6, 65795 Hattersheim, Germany
Tel.: +49 6196 569 300
Fax.: +49 6196 569 398
Email: [email protected]
Internet: www.yaskawa.eu.com
Hereby, YASKAWA Europe GmbH declares that the products and systems are in compli-
ance with the essential requirements and other relevant provisions. Conformity is indi-
cated by the CE marking affixed to the product.
For more information regarding CE marking and Declaration of Conformity (DoC), please
contact your local representative of YASKAWA Europe GmbH.
All Microsoft Windows, Office and Server products mentioned are registered trademarks
of Microsoft Inc., USA.
All other trademarks, logos and service or product marks specified herein are owned by
their respective companies.
Every effort has been made to ensure that the information contained in this document
was complete and accurate at the time of publishing. We cannot guarantee that the infor-
mation is free of errors, and we reserve the right to change the information at any time.
There is no obligation to inform the customer about any changes. The customer is
requested to actively keep his documents up to date. The customer is always responsible
for the deployment of the products with the associated documentation, taking into
account the applicable directives and standards.
This documentation describes all hardware and software units and functions known
today. It is possible that units are described that do not exist at the customer. The exact
scope of delivery is described in the respective purchase contract.
Contact your local representative of YASKAWA Europe GmbH if you have errors or ques-
tions regarding the content of this document. You can reach YASKAWA Europe GmbH via
the following contact:
Email: [email protected]
Contact your local representative of YASKAWA Europe GmbH if you encounter problems
or have questions regarding the product. If such a location is not available, you can reach
the Yaskawa customer service via the following contact:
YASKAWA Europe GmbH,
European Headquarters, Philipp-Reis-Str. 6, 65795 Hattersheim, Germany
Tel.: +49 6196 569 500 (hotline)
Email: [email protected]
All Rights Reserved
EC conformity declaration
Conformity Information
Trademarks
General terms of use
Document support
Technical support
HMI
General
Copyright © YASKAWA Europe GmbH
HB160 | PPC | 67P-RTP0-KB | en | 23-20
4
1.2 About this manual
This manual describes the Panel PC 67P-RTP0-KB.
nIt describes the structure, configuration and application.
nThe manual is written for users with basic knowledge of automation technology.
nThe manual consists of chapters. Each chapter describes a completed topic.
nThe following guides are available in the manual:
– An overall table of contents at the beginning of the manual.
– References with pages numbers.
Validity of the documentation
Product Order number as of version:
PPC015 IE 67P-RTP0-KB HW: 01 FW: V1.0.3 WindowsÒ 10 IoT
Enterprise
Important passages in the text are highlighted by following icons and headings:
DANGER!
Immediate or likely danger. Personal injury is possible.
CAUTION!
Damages to property is likely if these warnings are not heeded.
Supplementary information and useful tips.
1.3 Safety information
The system is constructed and produced for:
ncommunication and process control
ngeneral control and automation tasks
nindustrial applications
noperation within the environmental conditions specified in the technical data
ninstallation into a cubicle
DANGER!
This device is not certified for applications in
–in explosive environments (EX-zone)
Objective and contents
Icons Headings
Applications conforming
with specifications
HMI General
Safety information
HB160 | PPC | 67P-RTP0-KB | en | 23-20 5
The manual must be available to all personnel in the
nproject design department
ninstallation department
ncommissioning
noperation
CAUTION!
The following conditions must be met before using or commis-
sioning the components described in this manual:
– Hardware modifications to the process control system should only be
carried out when the system has been disconnected from power!
–Installation and hardware modifications only by properly trained per-
sonnel.
– The national rules and regulations of the respective country must be
satisfied (installation, safety, EMC ...)
National rules and regulations apply to the disposal of the unit!
Documentation
Disposal
HMI
General
Safety information
HB160 | PPC | 67P-RTP0-KB | en | 23-20 6
2 Hardware description
2.1 Safety information for users
The modules make use of highly integrated components in MOS-Technology. These com-
ponents are extremely sensitive to over-voltages that can occur during electrostatic dis-
charges. The following symbol is attached to modules that can be destroyed by electro-
static discharges.
The Symbol is located on the module, the module rack or on packing material and it indi-
cates the presence of electrostatic sensitive equipment. It is possible that electrostatic
sensitive equipment is destroyed by energies and voltages that are far less than the
human threshold of perception. These voltages can occur where persons do not dis-
charge themselves before handling electrostatic sensitive modules and they can damage
components thereby, causing the module to become inoperable or unusable. Modules
that have been damaged by electrostatic discharges can fail after a temperature change,
mechanical shock or changes in the electrical load. Only the consequent implementation
of protection devices and meticulous attention to the applicable rules and regulations for
handling the respective equipment can prevent failures of electrostatic sensitive modules.
Modules must be shipped in the original packing material.
When you are conducting measurements on electrostatic sensitive modules you should
take the following precautions:
nFloating instruments must be discharged before use.
nInstruments must be grounded.
Modifying electrostatic sensitive modules you should only use soldering irons with
grounded tips.
CAUTION!
Personnel and instruments should be grounded when working on electro-
static sensitive modules.
Handling of electrostatic
sensitive modules
Shipping of modules
Measurements and altera-
tions on electrostatic sen-
sitive modules
HMI Hardware description
Safety information for users
HB160 | PPC | 67P-RTP0-KB | en | 23-20 7
2.2 Properties
The Panel PC is a combination of industrial PC with state of the art performance features
and a touch panel with ideal display capabilities. The Panel PC is a compact and modular
embedded PC based on WindowsÒ 10 IoT Enterprise. Besides the extensive WindowsÒ
10 IoT Enterprise functions the Panel PC offers varied communication possibilities.
nWindowsÒ 10 IoT Enterprise
nMovicon 11.6 Win 128 I/O
n15.6" 16:9 TFT panel 16.7 M colour
nPCAP, multitouch
nDisplay resolution 1366 x 768
nProcessor: Baytrail IntelÒ Celeron J1900, Quad core 2GHz
nWork memory: 8GB
nUser memory: 64GB SSD (iSLC)
nCFast slot
n2 RS232/RS422/RS485 (switchable by BIOS), 3 USB-A, 2 Ethernet interfaces, VGA
port and Audio out, Connector for Remote power switch
nMetal case
nPassive cooling
nEasy mounting via integrated pivoted lever
nProtection class IP66 (frontal)
Order data
Type Order number Description
PPC015 IE 67P-RTP0-KB 15.6'' TFT color, 2x RS232/RS422/RS485, 3x USB-A, 2x Ethernet
RJ45, VGA, Audio out
General
HMI
Hardware description
Properties
HB160 | PPC | 67P-RTP0-KB | en | 23-20 8
2.3 Structure
2.3.1 Overview
1 Slot for voltage supply (DC 12-30V)
2 VGA interface
3 Reset button
4 RS232/RS422/RS485 interface COM 2
5 RS232/RS422/RS485 interface COM 1
6 USB-A interface USB 3.0
7 2x USB-A interface USB 2.0
8 RJ45 jack for Ethernet communication LAN 2
9 RJ45 jack for Ethernet communication LAN 1
10 2 pin connector for remote Power switch
11 3.5mm Audio Line out
12 Power switch (pushbutton)
13 Slot for CFast storage media
14 Display with touch sensitive area (touch screen)
Front view
HMI Hardware description
Structure > Overview
HB160 | PPC | 67P-RTP0-KB | en | 23-20 9
1 Slot for voltage supply (DC 12-30V)
2 VGA interface
3 Reset button
4 RS232/RS422/RS485 interface COM 2
5 RS232/RS422/RS485 interface COM 1
6 USB-A interface USB 3.0
7 2x USB-A interface USB 2.0
8 RJ45 jack for Ethernet communication LAN 2
9 RJ45 jack for Ethernet communication LAN 1
10 2 pin connector for remote Power switch
11 3.5mm Audio Line out
Please make sure that the Panel PC always has to be supplied with
external voltage!
1 Slot for CFast storage media
2 Power switch (pushbutton)
The Panel PC starts automatically when the power supply is switched on.
But you can change the configuration in the BIOS setup so that the Panel
PC has to be switched off by the power switch.
Ä
‘Restore AC Power
Loss’ page 51
After a Windows
Ò
‘Shut down’ the Panel PC can be switched on again
by means of the power switch at any time.
Bottom view
Top view
HMI
Hardware description
Structure > Overview
HB160 | PPC | 67P-RTP0-KB | en | 23-20 10
2.3.2 Interfaces
The Panel PC has got an integrated power supply. The power supply has to be provided
with DC 12... 30V. For this you find an according DC 24V slot at the back. The power
supply is protected against inverse polarity and overcurrent. The matching 3-pin plug con-
nector is included in the scope of delivery.
VGA SubD HD15 jack to connect a second display.
Power supply
VGA interface
HMI Hardware description
Structure > Interfaces
HB160 | PPC | 67P-RTP0-KB | en | 23-20 11
The 9-pin male SubD connector may be switched with BIOS. Here also the termination
resistor of the RS422 and RS485 interface may be activated or deactivated.
Ä
‘Submenu
"Serial Port 2 Configuration"’ page 44
RS232 interface
nLogical conditions as voltage level
nPoint-to-point connection with serial full-duplex transfer
nData transfer up to a distance of 15m
nData transfer rate up to 115.2kbit/s
RS422 interface
nLogical conditions as voltage difference between 2 twisted lines
nSerial bus connection full-duplex four-wire operation
nLine length: 250m at 115.2kbit/s ... 1200m at 19.2kbit/s
nData transfer rate up to 115.2kbit/s
RS485 interface
nLogical conditions as voltage difference between 2 twisted lines
nSerial bus connection half-duplex two-wire operation
nLine length: 250m at 115.2kbit/s ... 1200m at 19.2kbit/s
nData transfer rate up to 115.2kbit/s
RS232/RS422/RS485 inter-
face (switchable)
HMI
Hardware description
Structure > Interfaces
HB160 | PPC | 67P-RTP0-KB | en | 23-20 12
HMI Hardware description
Structure > Interfaces
HB160 | PPC | 67P-RTP0-KB | en | 23-20 13
The Panel PC has a USB 3.0 and two USB 2.0 interfaces. The fast USB 3.0 interface can
be recognized by the blue connector. USB 2.0 works half-duplex, the data can only be
transmitted in one direction. USB 3.0 works full-duplex, meaning that data can be trans-
ferred simultaneously in both directions. Using the "Host"-USB-A interfaces USB mouse,
keyboard, stick or USB hard discs can be connected.
The two RJ45 jacks provide the interface to the twisted pair cable, required for Ethernet.
LEDs
Activity
yellow
Link
green
Link
orange
Description
blinks 1000Mbit/s link
blinks 100Mbit/s link
blinks 10Mbit/s link or no link
not active
At this connection, you can connect an additional pushbutton as a remote Power switch
to switch the PPC on or off from any location. The matching 2-pin plug connector is
included in the scope of delivery.
Ä
further information page 10
3.5 mm stereo jack to connect an active speaker system or an earphone.
"Host"-USB-A
Ethernet connection
Remote Power switch
connection (SW)
Line out
HMI
Hardware description
Structure > Interfaces
HB160 | PPC | 67P-RTP0-KB | en | 23-20 14
2.3.3 Memory management
n8GB work memory
n64GB SSD iSLC user memory
nUSB storage media using "Host"-USB-A interface
nSlot for CFast memory card
The Panel PC has a work memory with a size of 8GB. The work memory is not buffered
and is deleted after shut down.
As internal permanent storage medium the Panel PC has a 64GB flash module (42GB
user data).
The Panel PC has got three USB-A interfaces (1x USB 3.0 and 2x USB 2.0). The con-
nection of USB sticks and USB drives are supported by the Panel PC.
At the back of the Panel PC there is a card slot for a memory card. At this slot you can
plug storage modules of the type CFast 2.0 - 600 MB/s (6GBit/s) - SATA protocol - not
hot-swap compatible.
Pin Assignment Pin Assignment
S1 GND PC6 n.c.
S2 SATA_TX1+ PC7 GND
S3 SATA_TX1- PC8 CFAST_LED1_C
S4 GND PC9 CFAST_LED2_C
S5 SATA_RX1+ PC10 n.c.
S6 SATA_RX1- PC11 n.c.
S7 GND PC12 n.c.
PC1 CFAST_CDI PC13 VCC3
PC2 GND PC14 VCC3
PC3 n.c. PC15 GND
PC4 n.c. PC16 GND
PC5 n.c. PC17 CFAST_CDO
Prior to removing the CFast card, make sure the unit's power is off and
disconnected from the power supply.
Overview
Work memory
User memory
USB storage media
Slot for CFast
HMI Hardware description
Structure > Memory management
HB160 | PPC | 67P-RTP0-KB | en | 23-20 15
2.4 Dimensions
For the installation of the Panel PC in control cabinets and desks the following dimen-
sions are necessary:
Front panel thickness 3 ... 12mm
Installation cutting (W x H) 401 x 296mm
Front panel (W x H x T) 417.80 x 312.80 x 6.20mm
Rear panel (W x H x D) 396 x 291 x 57.60mm
Installation depth 57.60mm
The degrees of protection are only guaranteed when the following is
observed:
–The material thickness of the installation cut-out is 3 ... 12mm
–The deviation from the plane for the panel cut-out is
£
0.5mm
–Permissible surface roughness in the area of the seal:
£
120µm (fric-
tion coefficient 120)
Installation dimensions
15.6" - 67P-RTP0-KB
HMI
Hardware description
Dimensions
HB160 | PPC | 67P-RTP0-KB | en | 23-20 16
2.5 General data
Conformity and approval
Conformity
CE 2014/30/EU EMC directive
Approval
UL Refer to Technical Data
others
RoHS 2011/65/EU Restriction of the use of certain hazardous substances in
electrical and electronic equipment
Protection of persons and device protection
Type of protection - IP20
Electrical isolation
to the field bus - electrically isolated
to the process level - electrically isolated
Insulation resistance -
Insulation voltage to reference earth
Inputs / outputs - AC / DC 50V, test voltage AC 500V
Protective measures - against short circuit
Environmental conditions to EN 61131-2
Climatic
Storage / transport EN 60068-2-14 -20…+75°C
Operation
Horizontal installation EN 61131-2 -10…+60°C
Vertical installation EN 61131-2 -10…+60°C
Air humidity EN 60068-2-30 RH1 (without condensation, rel. humidity 10…95%)
Pollution EN 61131-2 Degree of pollution 2
Mechanical
Oscillation EN 60068-2-6 1g, 9Hz ... 150Hz
Shock EN 60068-2-27 15g, 11ms
Mounting conditions
Mounting place - In the control cabinet
Mounting position - Horizontal and vertical
HMI Hardware description
General data
HB160 | PPC | 67P-RTP0-KB | en | 23-20 17
EMC Standard Comment
Emitted interference EN 61000-6-4 Class A (Industrial area)
Noise immunity
zone B
EN 61000-6-2 Industrial area
EN 61000-4-2 ESD
8kV at air discharge (degree of severity 3),
4kV at contact discharge (degree of severity 2)
EN 61000-4-3 HF field immunity (casing)
80MHz … 1000MHz, 10V/m, 80% AM (1kHz)
1.4GHz ... 6.0GHz, 3V/m, 80% AM (1kHz)
EN 61000-4-6 HF conducted
150kHz … 80MHz, 10V, 80% AM (1kHz)
EN 61000-4-4 Burst, degree of severity 3
EN 61000-4-5 Surge, degree of severity 31
1) Due to the high-energetic single pulses with Surge an appropriate external protective circuit with lightning protection elements like conductors for lightning and overvoltage is
necessary.
2.6 Use in difficult operating conditions
Without additional protective measures, the products must not be used in
locations with difficult operating conditions; e.g. due to:
–dust generation
–chemically active substances (corrosive vapors or gases)
–strong electric or magnetic fields
2.7 Technical data
2.7.1 67P-RTP0-KB
Order no. 67P-RTP0-KB
Type Panel PC PPC015 IE
Display
Display size (diagonal) 15.6 "
Display size (width) 344 mm
Display size (height) 195 mm
Resolution 768 x 1366 / 1366 x 768
Aspect ratio 16:9
Type of display TFT color (16.7M colors)
MTBF Backlights (25°C) 50000 h
System properties
HMI
Hardware description
Technical data > 67P-RTP0-KB
HB160 | PPC | 67P-RTP0-KB | en | 23-20 18
Order no. 67P-RTP0-KB
Processor Intel Celeron Quad core 2 GHz
Operating system Windows 10 IoT Enterprise
User software Movicon 11 Win Standard
Work memory 8 GB
User memory 64 GB
Available memory (user data) 42 GB
SD/MMC Slot -
CF Card Slot Typ II -
CFast Slot ü
Time
Real-time clock buffered ü
Clock buffered period (min.) 4 y
Type of buffering lithium battery
Load time for 50% buffering period -
Load time for 100% buffering period -
Accuracy (max. deviation per day) 10 s
Operating controls
Touchscreen PCAP
Touch function Multi Touch
Keyboard external via USB
Mouse external via USB
Interfaces
MPI, PROFIBUS-DP -
MPI, PROFIBUS-DP connector -
Serial, COM1 RS232 / RS422 / RS485
COM1 connector Sub-D, 9-pin, male
Serial, COM2 RS232 / RS422 / RS485
COM2 connector Sub-D, 9-pin, male
Number of USB-A interfaces 3
USB-A connector USB-A (host)
Number of USB-B interfaces -
USB-B connector -
Number of ethernet interfaces 2
Ethernet Ethernet 10/100/1000 MBit
Ethernet connector 2 x RJ45
Integrated ethernet switch -
HMI Hardware description
Technical data > 67P-RTP0-KB
HB160 | PPC | 67P-RTP0-KB | en | 23-20 19
Order no. 67P-RTP0-KB
Video connectors VGA SubD HD15
Audio connections Line out, stereo jack 3.5 mm
Technical data power supply
Power supply (rated value) DC 24 V
Power supply (permitted range) DC 20.4...28.8 V
Reverse polarity protection ü
Current consumption (no-load operation) 0.12 A
Current consumption (rated value) 0.85 A
Inrush current -
I²t 0.35 A²s
Power loss 21 W
Status information, alarms, diagnostics
Status display none
Supply voltage display none
Mechanical data
Housing / Protection class
Material coated aluminium steel plate
Mounting via integrated pivoted lever
Protection class IP front side IP 66
Protection class IP back side IP 20
Protection class NEMA front side -
Protection class NEMA back side -
Dimensions
Front panel 417.8 mm x 312.8 mm x 6.2 mm
Rear panel 396 mm x 291 mm x 57.6 mm
Installation cut-out
Width 401 mm
Height 296 mm
Minimum 3 mm
Maximum front panel thickness 12 mm
Net weight 6.2 kg
Weight including accessories 8.88 kg
Gross weight 8.88 kg
Environmental conditions
Operating temperature -10 °C to 60 °C
Storage temperature -20 °C to 75 °C
HMI
Hardware description
Technical data > 67P-RTP0-KB
HB160 | PPC | 67P-RTP0-KB | en | 23-20 20
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
