Skmei 1099 Owner's manual

SKMEI User Manual

Function characteristics:

LED lights show month, day, hour ,minutes,seconds.12 hours to make display

This machine save electricity design, at ordinary time, see time off screen should press S1

key, scan 2 to display normal time

Mode conversion:

In normal time display mode, press S1 in the following mode.

Normal display mode date display mode seconds the display mode normal

display mode

Time and date set:

In normal time display modes, press S1 key not to put three seconds can enter setup

mode, right now "hours" start flashing; press to the key S1 adjustment parameters; must

hours after all set up again to the following procedure setting minutes, date;

Press S1 three seconds not to put, "minutes" flashing, press to the S1 key adjustment

minutes;

Press S1 three seconds not to put, "year" flashing, press to the S1 key adjustment year;

Press S1 three seconds not to put, "month" flashing, press to the S1 key adjustment

month;

Press S1 three seconds not to put, "day" flashing, press to the S1 key adjustment day;

After the completion of the set, five seconds without the key operate will return to standby

mode