Triton TN6210 Series Framed Rectangular Sliding Door Installation guide

Triton
Brand
Triton
Model
TN6210 Series Framed Rectangular Sliding Door
Type
Installation guide
Determine your step in from the edge of the tray. Measure your X dimension.
Measurement must fall within the below table of adjustments market as X.
Plumb your wall profiles and mark the points of fixing.
Loosen the screw before you fit your top
and bottom profile to the upright profile.
on the uprights. Then lift the assmbled frame onto the tray.
Equalise the gaps on either side of the upright profiles ang fix using 2SY51
16
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Triton TN6210 Series Framed Rectangular Sliding Door Installation guide

Triton
Brand
Triton
Model
TN6210 Series Framed Rectangular Sliding Door
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents