2. D+H
  3. CDC-BS052-IFI

D+H CDC-BS052-IFI, CDC-BS051-IFI Operating instructions

  • I've reviewed the provided datasheet for the D+H bracket sets CDC-BS051-IFI and CDC-BS052-IFI. This document details their specifications for integrated mounting within Alcoa-Kawneer profile systems, including chain stroke options and minimum frame width requirements. I'm ready to address any questions you might have about these bracket sets.
  • What profile systems are these bracket sets compatible with?
    What is the minimum recommended outer frame face width?
    What are the different chain stroke options for these brackets?
CDC-BS051-IFI /
CDC-BS052-IFI
CDC Konsolensatz für integrierte Montage/
CDC bracket set for integrated mounting
Für die profilspezifische Montage der
Konsolen stehen Montagezeichnungen
zur Verfügung.
Diese sind unbedingt zu beachten!
Fragen Sie Ihren D+H Partner.
For the profile-specific bracket-
mounting, assembly drawings are
available.
These instructions must be followed!
Ask your D+H partner.
99.881.94 1.0/11/09
®
- für Alcoa-Kawneer Profilsystem AA 610 (HW),
AA 720 (HW / HI)
- für die integrierte Montage im Blendrahmenprofil
mit einwärts öffnendem Flügel und raumseitig
aufschlagendem Flügelrahmen
- empfohlene Mindest-Blendrahmenhöhe innen 40mm
(siehe Profilverwendungsliste in den
Verkaufsinformationen)
BS051-IFI: CDC Ausführung bis 350mm Kettenhub
BS052-IFI: CDC Ausführung bis 600mm Kettenhub
®
- for Alcoa-Kawneer profile-system AA 610 (HW),
AA 720 (HW / HI)
- for integrated mounting inside of the outer frame
profile with inwards opening sash and face-fitted
vent frame on the room side
- recommended outer frame face width has to be at
least 40mm (on the room side)
(see application overview in the sales information)
BS051-IFI: CDC version up to 350mm chain stroke
BS052-IFI: CDC version up to 600 mm chainstroke
a1x CDC Kettenantrieb (nicht enthalten)
b1x Winkel rechts (mit Kerbe)
c1x Winkel links (ohne Kerbe)
d4x Zylinderschraube M5 x 12
e4x Linsenschraube 3,9 x 16
f1x Abdeckung
g1x Schrumpfschlauch (für Kabelschutz)
h1x Adapterwinkel
i1x Flügelkonsole
k1x Zylinderstift 4x30
m1x Gewindestift M5 x 8
n2x Blindnietmutter M5
o2x Zylinderschraube M5 x 20
a1x CDC chain drive (not included)
b1x angle right (with notch)
c1x angle left (without notch)
d4x cylinder-head screw M5 x 12
e4x oval head screw 3,9 x 16
f1x cover plate
g1x heat-shrink tube (for cable protection)
h1x adapter angle
i1x sash bracket
k1x cylindrical pi
m1x thread pin M5 x 8
n2x blind rivet nut M5
o2x cylinder-head screw M5 x 20
n 4x30
a
b
c
d
e
f
g
Kabel /
cable
h
o
k
m
n
i
B-B
D+H Mechatronic AG • Georg-Sasse-Str. 28-32 • 22949 Ammersbek • Tel. 40-605 65 239 • Fax 40-605 65 254 • D- +49 +49 www.dh-partner.com
© 2009 D+H Mechatronic AG, Ammersbek
Alle Maße in Millimeter. All sizes in millimetre.
Technische Änderungen vorbehalten.
Rights to technical modifications reserved.
Inhalt
Content
B
B
/