Liebherr HMFvh 4011 Perfection Operating instructions

Brand: Liebherr

Model: HMFvh 4011 Perfection

Category: Drink coolers

Type: Operating instructions

This manual is also suitable for

User Guide

Quality, Design and Innovation

home.liebherr.com/fridge-manuals

Contents

1 Appliance at a glance............................................ 3

1.1 Scope of supply............................................................ 3

1.2 Overview of appliance and equipment..................... 3

1.3 Special features........................................................... 3

1.4 Range of use of appliance.......................................... 4

1.5 Appliance noise emissions......................................... 4

1.6 Compliance................................................................... 4

1.7 SVHC substances according to REACH regulation. 4

2 General safety instructions.................................. 4

3 Putting into operation........................................... 6

3.1 Installation conditions................................................ 6

3.2 Appliance dimensions................................................. 7

3.3 Transporting appliance............................................... 7

3.4 Unpacking appliance................................................... 7

3.5 Removing transport lock............................................. 7

3.6 Installing door handle................................................. 7

3.7 Mounting anti-tipping device..................................... 7

3.8 Installing appliance..................................................... 8

3.9 Setting up the appliance so it is level...................... 8

3.10 Installing multiple appliances.................................... 9

3.11 After installation.......................................................... 9

3.12 Disposing of packaging............................................... 9

3.13 Reversing the door opening direction...................... 9

3.14 Aligning the door.......................................................... 16

3.15 Connecting appliance................................................. 17

3.16 Switching on appliance (first use)............................ 17

4 Storage.................................................................. 18

4.1 Information regarding storage................................... 18

5 Controls................................................................. 18

5.1 Control and display elements.................................... 18

5.1.1 Status display............................................................18

5.1.2 Display symbols........................................................ 18

5.1.3 Acoustic signals........................................................ 19

5.2 Navigation..................................................................... 19

5.2.1 Navigation with the touch display......................... 19

5.2.2 Settings menu........................................................... 19

5.2.3 Customer menu........................................................ 20

5.2.4 General rules.............................................................20

5.3 Functions....................................................................... 20

5.3.1 Overview of functions..............................................20

5.3.2 Switching appliance on and off .............................21

5.3.3 Temperature ..............................................................21

5.3.4 Temperature recording ........................................... 22

5.3.5 Lighting ..................................................................... 22

5.3.6 Door lock ................................................................... 23

5.3.7 SmartLock..................................................................24

5.3.8 Settings menu access protection .........................25

5.3.9 Access codes.............................................................26

5.3.10 Remote control ........................................................ 28

5.3.11 Maintenance interval reminder ............................. 29

5.3.12 Language .................................................................. 29

5.3.13 Date and time ...........................................................30

5.3.14 Temperature unit ..................................................... 30

5.3.15 Display brightness .................................................. 30

5.3.16 Alarm Sound..............................................................30

5.3.17 Key Sound...................................................................31

5.3.18 WiFi connection ........................................................31

5.3.19 LAN connection ........................................................32

5.3.20 Info.............................................................................. 33

5.3.21 Operating hours ....................................................... 33

5.3.22 Software.....................................................................34

5.3.23 Defrosting ................................................................. 34

5.3.24 Data download / Datalogging................................34

5.3.25 Sensor calibration ................................................... 35

5.3.26 Temperature alarm .................................................. 35

5.3.27 Door alarm ................................................................ 36

5.3.28 Light alarm ................................................................ 37

5.3.29 Alarm simulation ...................................................... 37

5.3.30 Alarm log ................................................................... 37

5.3.31 Alarm relay ................................................................38

5.3.32 DemoMode.................................................................38

5.3.33 Factory reset .............................................................39

5.4 Message........................................................................ 39

5.4.1 Warnings....................................................................39

5.4.2 Reminders.................................................................. 41

6 Features................................................................. 41

6.1 Safety lock.................................................................... 41

6.2 Remote control............................................................. 42

6.3 Sensors.......................................................................... 42

6.4 Sensor info ................................................................... 42

6.5 Interfaces...................................................................... 43

7 Maintenance.......................................................... 43

7.1 Maintenance schedule................................................ 43

7.2 Defrosting appliance................................................... 45

7.3 Cleaning the appliance............................................... 45

7.4 Replacing appliance battery...................................... 46

7.5 Replacing the remote control batteries................... 46

8 Customer help....................................................... 47

8.1 Technical specifications............................................. 47

8.2 Technical fault.............................................................. 48

8.3 Customer Service......................................................... 48

8.4 Type plate...................................................................... 49

9 Shutting down....................................................... 49

10 Disposal................................................................. 49

10.1 Preparing appliance for disposal.............................. 49

10.2 Disposing of the appliance in an environmentally

friendly manner............................................................ 49

11 Additional information.......................................... 50

12 Quick Start Guide for everyday use...................... 51

The manufacturer is continually working on the further

development of all types and models. Please be aware that

we reserve the right to make changes to the shape, equip‐

ment and technology.

Symbol Explanation

Read instructions

Please read the information in these instruc‐

tions carefully to understand all of the benefits

of your new appliance.

Full instructions on the internet

You can find detailed instructions on the

internet using the QR code on the front

of these instruction or by entering the

service number at home.liebherr.com/fridge-

manuals.

The service number can be found on the serial

tag:

Fig. Example illustration

Check appliance

Check all parts for transport damage. If you

have any complaints, please contact your

agent or customer service.

2 * Depending on model and options

Symbol Explanation

Differences

These instructions apply to a range of models,

so differences are possible. Sections that

apply to certain models only are marked with

an asterisk (*).

Instructions and results

Instructions are marked with a .

Results are marked with a .

Videos

Videos about the appliances are available on

the YouTube channels of Liebherr-Hausgeräte.

These operating instructions apply to:

-HMFvh 4001

-HMFvh 4011

-HMFvh 5501

-HMFvh 5511

1 Appliance at a glance

1.1 Scope of supply

Check all parts for transport damage. If you have any

complaints, please contact your dealer or Customer Service.

(see 8.3 Customer Service)

The delivery comprises the following parts:

-Free-standing appliance

-Equipment *

-Installation materials *

-Operating instructions

-Service brochure

-Quality certificate *

-Mains cable

-Remote control

-Emergency unlocking key

-Handle incl. screws and Torx wrench

-Wall fastening kit

1.2 Overview of appliance and equip‐

ment

HMFvh 4001

HMFvh 5501

HMFvh 4011

HMFvh 5511

Fig. 1 Example illustration of the front

Equipment

(1) Type plate (6) Control elements and

temperature display

(2) Grid shelves (7) Sensor feedthrough

(3) Adjusting feet/castors

*(8) Safety thermostat

sensor

(4) Interior lighting * (9) Defrost drain water

(5) Lock (10) P sensor

Fig. 2 Example illustration of the rear

Equipment

(1) LAN/WiFi interface* (4) Connection for P sensor

(2) Potential-free alarm

output (5) Carrying aid

(3) USB interface

1.3 Special features

Note

Accessories are available from Customer Service

(see 8.3 Customer Service) and the Liebherr-Hausgeräte

store at home.liebherr.com/shop/de/deu/zubehor.html.

SmartModule

The appliance is fitted with a SmartModule.

This is a WiFi and LAN interface for the connection

between the appliance and an external documentation and

alarm system such as Liebherr SmartMonitoring.

Appliance at a glance

* Depending on model and options 3

Retrofitting drawers

Temperature qualification is required when retrofitting

drawer systems in Liebherr refrigerators/freezers where

these are used for temperature-sensitive materials such

as chilled drugs and refrigerated products which are

subject to specific standards requirements. Retrofitting

drawers in Liebherr refrigerators/freezers can result in the

goods stored becoming spoiled or damaged. The retrofit‐

ting must therefore be completed exclusively by author‐

ised service providers from the manufacturer of the refrig‐

erator/freezer.

1.4 Range of use of appliance

Intended use

This medical refrigerator is suitable for

professional storage of products at a temper‐

ature of 5 °C.

Typical products to be stored include drugs

which require refrigeration, medicines or

other pharmaceutical products in a tempera‐

ture range from 2 °C to 8 °C.

The appliance meets the requirements of DIN

13277 Refrigerators and freezers for labora‐

tory and medical applications.

It is necessary to use an independent alarm

system with permanent monitoring if storing

valuable or temperature-sensitive substances

or products. This alarm system must be

designed in such a way that every alarm

state is immediately registered by a compe‐

tent person who then takes appropriate

measures.

Foreseeable incorrect use

Do not use the appliance for the following

applications:

-Storage and refrigeration of:

•Chemically unstable, flammable or corro‐

sive substances

•Blood, plasma or other body fluids for the

purpose of infusion, application or intro‐

duction in the human body.

-Use in potentially explosive atmospheres.

-Use outdoors or in areas exposed to damp‐

ness and splashing water.

Improper use of the appliances will result in

goods stored being damaged or spoiled.

Climate classes

The applicable climate class for your appli‐

ance is printed on the type plate.

Fig. 3 Type plate

(X) The climate class

states the ambient

conditions in which the

appliance can be oper‐

ated safely.

Climate

class (X)

max. room

temperature

max. rel.

humidity

7 35 °C 75%

Note

The minimum permitted room temperature at

the setup location is 10 °C.

Slight condensation may form at the limit

conditions on the glass door and on the side

walls.

1.5 Appliance noise emissions

The A-weighted emission sound pressure level during oper‐

ation of the appliance is under 70 dB(A) (sound power rel.

1 pW).

1.6 Compliance

The refrigerant circuit has been tested for leaks.

This appliance complies with the applicable safety regu‐

lations and with EU directives 2006/42/EC, 2014/30/EU,

2009/125/EC and 2011/65/EU.

The installed wireless module complies with direc‐

tive 2014/53/EU. Information on the wireless model

(see 8.1 Technical specifications) .

The full text of the EU Declaration of Conformity is available

on the following website: www.liebherr.com

1.7 SVHC substances according to

REACH regulation

You can check whether your appliance contains SVHC

substances according to REACH regulation at the following

link: home.liebherr.com/de/deu/de/liebherr-erleben/nach‐

haltigkeit/umwelt/scip/scip.html

2 General safety instructions

Please keep these operating instructions in a

safe place so you can refer back to them at

any time.

If you pass the appliance on, please hand

these operating instructions to the next user.

Read these operating instructions carefully

before use to ensure safe and correct use of

the appliance. Follow the instructions, safety

General safety instructions

4 * Depending on model and options

instructions and warning messages included

at all times. They are important for ensuring

you can operate and install the appliance

safely and without any problems.

Danger for the user:

-This appliance may only be used by

specialist and laboratory personnel who

have been trained for this purpose and are

familiar with all safety measures pertaining

to laboratory work. Children and persons

with reduced physical, sensory or mental

capabilities or lack of experience and

knowledge must not commission or operate

this appliance.

-The socket must be easily accessible so

that the appliance can be disconnected

quickly from the electricity supply in an

emergency. It must not be located in the

area behind the appliance.

-When disconnecting the appliance from the

supply, always take hold of the plug. Do not

pull the cable.

-In the event of a fault pull out the mains

plug or deactivate the fuse.

-WARNING: Do not damage the mains power

cable. Do not operate the appliance with a

defective mains power cable.

-WARNING: Multiple sockets/distributors

and other electronic equipment (such as

halogen transformers) must not be placed

or operated at the rear of the appliance.

-WARNING: Keep ventilation openings, in

the appliance enclosure or in the built-in

structure, clear of obstruction.

-Only customer service or other specially

trained staff may repair or perform other

operations on the appliance.

-Only assemble, connect and dispose of the

appliance according to the instructions.

Fire hazard

-The coolant used (information on the model

plate) is ecofriendly but also flammable

Any leaking coolant may ignite.

•WARNING: Do not damage refrigeration

circuit.

•Do not handle ignition sources inside the

appliance.

•WARNING: Do not use electrical appli‐

ances in the fridge compartment which

do not comply with the design recom‐

mended by the manufacturer.

•If the refrigerant leaks: remove any naked

flames or ignition sources from the

vicinity of the leakage point. Properly air

the room. Inform customer services.

-Do not operate the appliance close to

explosive gases.

-Do not store or use petrol or other flam‐

mable gases and liquids close to the appli‐

ance.

-Do not store any explosive substances,

such as aerosol containers with flammable

propellant gas, in the appliance. To iden‐

tify these spray cans, look for the list of

contents printed on the can, or a flame

symbol. Gases possibly escaping may ignite

due to electrical components.

-Keep burning candles, lamps and other

items with naked flames away from the

appliance so that they do not set the appli‐

ance on fire.

-Alcoholic liquids or other containers with

alcohol inside must only be stored tightly

sealed. Any alcohol that leaks out may be

ignited by electrical components.

Danger of tipping and falling:

-WARNING: In order to prevent danger due

to an unstable appliance, it must be fixed in

accordance with the instructions.

-Do not misuse the plinth, drawers, doors

etc. as a step or for support.

Danger of frostbite, numbness and pain:

-Avoid prolonged skin contact with cold

surfaces or refrigerated/frozen goods or

take protective measures, e.g. wear gloves.

Danger of injury and damage:

-WARNING: Do not use mechanical equip‐

ment or other methods to speed up the

defrosting process other than those recom‐

mended by the manufacturer.

-WARNING: Risk of injury due to electric

shock! There are live electrical parts under

the cover.

Only have the LED interior lighting replaced

or repaired by customer service or other

suitably trained professionals.

-NOTICE: Appliance must only be used using

original manufacturer accessories or using

accessories from other providers approved

by the manufacturer. The user bears the

risk of using accessories which are not

approved.

Risk of crushing

-Do not hold the hinge when opening and

closing the door. Fingers may get caught.

Specialist personnel qualifications:

The appliance may only be installed,

tested, maintained, and commissioned by

General safety instructions

* Depending on model and options 5

specialist personnel who are familiar with

the installation, commissioning, and opera‐

tion of the appliance.

Specialist personnel are persons who, on

account of their specialist training, knowl‐

edge and experience as well as their knowl‐

edge of the relevant standards, are able to

assess and perform the work assigned to

them and identify potential hazards. They

must have training, instruction, and author‐

isation to work on the appliance.

Symbols on the appliance:

This symbol may be located on the

compressor. It relates to the oil in the

compressor and makes reference to the

risk that:Swallowing or inhaling

can be fatal. This advice is only rele‐

vant to recycling. There is no danger in

normal operation.

WARNING: Danger of fire / flammable

materials. This symbol is located on the

compressor and indicates the danger of

flammable materials. Do not remove the

sticker.

The symbol is located on the back of

the appliance near the alarm relay and

indicates the following danger: Electric

shock! Even if an appliance is discon‐

nected from the mains there may still be

extraneous voltage. Do not remove sticker.

This or a similar sticker may be located

on the rear of the appliance. This sticker

indicates that there are vacuum insulation

panels (VIP) or perlite panels in the door

and/or housing. This advice is only relevant

to recycling. Do not remove the sticker.

This or a similar sticker may be located on

the rear of the appliance. It refers to the

Li-ion self-charging battery installed. This

advice is only relevant to recycling. Do not

remove sticker.

Please note the warning messages and other

specific advice in the other chapters:

DANGER

Indicates an immediately

hazardous situation which will lead

to death or serious injuries if it is

not avoided.

WARNING Indicates a hazardous situation

which will lead to death or serious

injuries if it is not avoided.

CAUTION

Indicates a hazardous situation

which will lead to minor or

moderate injuries if it is not

avoided.

NOTICE Indicates a hazardous situation

which may lead to damage to prop‐

erty if it is not avoided.

Note Indicates useful instructions and

tips.

3 Putting into operation

3.1 Installation conditions

WARNING

Fire hazard due to dampness!

If live parts or the mains lead become damp this may cause

short circuits.

uThe appliance is designed for use in enclosed areas. Do

not operate the appliance outdoors or in areas where it is

exposed to splash water or damp conditions.

3.1.1 Installation location

WARNING

Leaking coolant and oil!

Fire. The coolant contained in the appliance is eco-friendly,

but also flammable. The oil contained in the appliance

is flammable. Escaping coolant and oil can ignite if the

concentration is high enough and in contact with an

external heat source.

uDo not damage the pipelines of the coolant circuit and

the compressor.

-Do not install appliance in direct sunlight, next to an

oven, radiator or similar.

-The best place for installation is a dry and well ventilated

room.

-If the appliance is installed in a very humid environment,

condensation can form on the outside of the appliance.

Always ensure good airflow and ventilation in the instal‐

lation location.

-The more refrigerant there is in the appliance, the larger

the space it is installed in must be. If the space is too

small, any leak may create a flammable mixture of gas

and air. For every 8 g of refrigerant, the installation space

must be at least 1 m3. Information regarding the refrig‐

erant can be found on the type plate inside the appliance.

-The floor of the location must be horizontal and even.

-The installation location must be able to withstand the

weight of the appliance plus weight when stocked to

maximum level. (see 8.1 Technical specifications)

3.1.2 Electrical connection

WARNING

Danger of fire due to incorrect positioning!

If the mains cable or plug touches the back of the appli‐

ance, the vibration can damage the mains cable or the plug

resulting in a short circuit.

uMake sure the mains cable is not trapped under the appli‐

ance when you position the appliance.

uStand the appliance so that it is not touched by connec‐

tors or main cables.

uDo not connect any appliances to sockets in the area of

the back of the appliance.

uDo not place and operate multi-sockets/power distribu‐

tors and other electronic devices (such as halogen trans‐

formers) at the back of the appliances.

Putting into operation

6 * Depending on model and options

3.2 Appliance dimensions

HMFvh 4001/4011 HMFvh 5501/5511

A 1884 mm 1793 mm

B 597 mm 747 mm

C 664 mm 779 mm

D 1203 mm 1468 mm

E 23 mm 23 mm

F 1241 mm 1506 mm

A = appliance height including feet/castors

B = appliance width without handle [handle depth = 45 mm]

C = appliance depth without handle [handle depth = 45 mm]

D = appliance depth with door open

E = hinge height

F = appliance depth with protruding handle and anti-tipping

device

3.3 Transporting appliance

WARNING

Risk of injury due to broken glass!*

When transporting at an altitude of more than 1500 m, the

glass panes of the door may break. This can result in sharp-

edged fragments, which can cause serious injuries.

uTake appropriate protective action.

uOn initial setup: Transport the appliance in its packaging.

uWhen transporting after initial setup (e.g. relocation):

Transport the appliance unloaded.

uTransport the appliance upright.

uUse two people to transport the appliance.

3.4 Unpacking appliance

uCheck the appliance and the packaging for damage

during transport. Contact the supplier immediately if you

suspect any damage. Do not connect appliance to the

power supply.

uRemove all materials from the back or the side walls

of the appliance that may prevent proper installation or

prevent air flow and ventilation.

3.5 Removing transport lock

Fig. 4

uRemove transport lock in upwards direction.

wBase holder remains on the appliance.

3.6 Installing door handle

Fig. 5

uAttach handle from accessory kit to the door using the

screws Fig. 5 (1) supplied.

uPut on covers Fig. 5 (2).

3.7 Mounting anti-tipping device

Tools

Fig. 6

Prevent appliance from tipping over.

Putting into operation

* Depending on model and options 7

Fig. 7

The anti-tipping device, consisting of two retaining parts,

two retaining hooks and four screws (4 x 14), is included

with the appliance.

Fig. 8

uMount retaining parts Fig. 8 (1) on the appliance using the

screws supplied.

uPush appliance with retaining parts mounted against the

wall.

Fig. 9

uMake markings on the wall Fig. 9 (1).

uRemove appliance.

Fig. 10

Use fixing material (e.g. dowels) which is appropriate

for the nature of the wall (wood, concrete) and suffi‐

cient attachment points .

uAttach retaining hooks.

3.8 Installing appliance

CAUTION

Risk of injury and damage.

uUse 2 people to install appliance.

CAUTION

Risk of injury and damage.

The door can knock against the wall and become damaged

as a result. In the case of glass doors, the damaged glass

can cause injuries.

uProtect the door from knocking against the wall. Attach

door stopper, e.g. felt stopper, to the wall.

uConnect all necessary components (e.g. mains cable) to

the back of the appliance and route to the side.

Note

Cables can be damaged.

uDo not jam the cable when pushing the appliance back.

Fig. 11

uSlide appliance up against the wall so that the retaining

parts latch into the securing hooks.

wThe appliance is now secured against tipping.

wIt can be released by folding back the securing hooks.

3.9 Setting up the appliance so it is

level

NOTICE

Appliance body is deformed and door does not close.

uAlign appliance horizontally and vertically.

uCompensate for uneven floors using adjustable feet.

WARNING

Incorrect height adjustment of the adjustable foot!

Can cause severe or even fatal injury. Incorrect height

adjustment can cause the bottom part of the adjustable

foot to come loose and the appliance to tip over.

uDo not unscrew the adjustable foot too far.

Putting into operation

8 * Depending on model and options

Fig. 12 *

Raising appliance:

uTurn adjustable foot clockwise.

Lowering appliance:

uTurn adjustable foot anticlockwise.

3.10 Installing multiple appliances

NOTICE

Risk of damage due to condensation between the side

walls.

uDo not install the appliance directly next to another

fridge.

uInstall appliances with a space 3 cm between appliances.

uOnly install multiple appliances up to temperatures of

35 °C and 65% humidity next to one another.

uAt higher levels of humidity, increase space between

appliances.

Fig. 13 Side-by-side installation

Note

A side-by-side kit is available as an accessory via Liebherr

Customer Service. (see 8.3 Customer Service)

3.11 After installation

uTake off the protective film from the exterior of the appli‐

ance.

uClean appliance. (see 7.3 Cleaning the appliance)

uIf necessary: Disinfect the appliance.

uKeep the invoice so you have the appliance and dealer

information available if needed.

3.12 Disposing of packaging

WARNING

Danger of suffocation due to packing material and plastic

film!

uDo not allow children to play with packing material.

The packaging is made of recyclable materials:

-corrugated board/cardboard

-expanded polystyrene parts

-polythene bags and sheets

-polypropylene straps

-nailed wooden frame with polyethylene panel*

uTake the packaging material to an official collecting

point.

3.13 Reversing the door opening direc‐

tion

Tools

WARNING

Risk of injury if the door is not reversed correctly!

uThe door may only be reversed by qualified personnel.

WARNING

Risk of injury and material damage due to heavy door!

uOnly perform the conversion if you can carry a weight of

25 kg.

uAlways have someone help you carry out the conversion.

NOTICE

Live parts!

Damage to electrical components.

uDisconnect the power plug before reversing the door.

uOpen the door.

Fig. 14

uUnlatch the front covers Fig. 14 (1) on the inside and

remove them sideways.

uLift off the upper cover Fig. 14 (2).

Putting into operation

* Depending on model and options 9

Fig. 15

uUnlatch the middle cover and remove it.

Fig. 16

uDisconnect the plug Fig. 16 (1) from the circuit board.

Fig. 17

uConnect the plug Fig. 17 (1) to the circuit board.

Fig. 18

uUnlatch the cover with a small screwdriver and take it

off.

Fig. 19

Putting into operation

10 * Depending on model and options

uRemove the plug from the plug holder.

Fig. 20 The installation position of the plug holder can be

rotated by 180°.

uDisengage the plug holder.

Fig. 21

uRemove the screws Fig. 21 (1).

uPress the latching lugs Fig. 21 (2) to the side and take off

the remote lock Fig. 21 (3).

Fig. 22

uTurn the remote lock Fig. 22 (1) by 180° and fasten it on

the opposite side.

uSnap in the plug holder Fig. 22 (2) on the opposite side.

NOTICE

Risk of injury if the door tips out!

uHold the door.

Fig. 23

uUnscrew the hinge Fig. 23 (1).

uLift the door with the hinge straight up by Fig. 23 (2)

roughly 200 mm and take it off.

uCarefully place the door on a soft surface.

Fig. 24

uCarefully pull out the cable.

Fig. 25

uPull out the hinge.

Putting into operation

* Depending on model and options 11

Fig. 26

uPull out the hinge bushing Fig. 26 (1) with your fingers.

uCarefully lift the cover plug Fig. 26 (2) with a slotted

screwdriver and pull it out.

Fig. 27

uInsert hinge bushing and cover plug on the opposite side

(the flattened sides face outwards).

Fig. 28 Insulated door*

Fig. 29 Glass door*

uRemove the panels.

uUnscrew the handle.

Putting into operation

12 * Depending on model and options

Fig. 30

uPut the stopper on the opposite side.

Fig. 31 Insulated door*

Fig. 32 Glass door*

uScrew the handle onto the opposite side.

uAttach the panels.

Fig. 33

uMove the door latch to the opposite side.

Note

The holes are pre-marked and must be pierced with the

self-tapping screws.

Fig. 34

uMove the hinge to the opposite side.

WARNING

Risk of injury and material damage if the door tips out!

uTighten the bearing pins to the specified torque.

Putting into operation

* Depending on model and options 13

Fig. 35

uPut the pin back into the hinge Fig. 35 (1).

uTighten the pin Fig. 35 (2) to a torque of 12 Nm.

uUnscrew the hinge again.

NOTICE

Risk of injury due to tensioned spring!

uDo not disassemble the door closing system Fig. 36 (1).

Fig. 36

uTurn the closing system Fig. 36 (2) until it clicks.

wThe tension of the closing system is released.

uUnscrew the hinge Fig. 36 (3).

Fig. 37

uPut the door closing system in the hinge.

uMake sure the pin chamfer Fig. 37 (1) faces the round hole

when you put it in.

-or-

Note

Incorrect alignment of the height adjustment washers.

Nuts no longer have sufficient hold.

uThe washer must lock into the underside of the closing

system.

Fig. 38

uLoosen the nut and remove the door closing system

Fig. 38 (1).

uObserve the correct alignment of the height adjustment

washers Fig. 38 (2).

uPut the door closing system in the hinge and fix in place

with the nut Fig. 38 (3).

uObserve the correct alignment of the door closing system

when doing so Fig. 38 (4).

Fig. 39

uPut the cover plate on the opposite side.

Putting into operation

14 * Depending on model and options

Fig. 40

uScrew the hinge onto the opposite side.

Note

Correct alignment and tension are important for the closing

system to work properly.

Fig. 41 Left-hinged (A) / Right-hinged (B)

uTurn the closing system against the resistance until the

bar of the closing system Fig. 41 (1) points outwards.

wThe closing system automatically stays in this position.

wThe closing system is now aligned and tensioned.

Fig. 42

uPut the hinge into the door.

Fig. 43

uCarefully push the cable through.

NOTICE

Risk of injury if the door tips out!

uHold the door.

Fig. 44

uTogether with a second person, lift the door from the

ground.

uCarefully put the door on the closing system with the

door opened at a 90° angle.

NOTICE

Material damage due to incorrect mounting!

uDo not pinch the cable when mounting the hinge.

Putting into operation

* Depending on model and options 15

Fig. 45

uFeed the cable through the recess in the hinge and lay it

carefully Fig. 45 (1).

uScrew on the hinge Fig. 45 (2).

Fig. 46

uPut the plug Fig. 46 (1) in the plug holder.

Fig. 47

uConnect the plug Fig. 47 (1) to the circuit board.

Fig. 48

uPut on the cover.

Fig. 49

uSnap in the middle cover.

Fig. 50

uHook in the front covers Fig. 50 (1) on the side and snap

them into place.

uSnap on the top cover Fig. 50 (2) from above.

uClose the door.

wThe door has now been reversed.

3.14 Aligning the door

If the door is not straight, you can adjust it on the lower

hinge.

Fig. 51

uRemove the middle screw on the lower hinge.

Putting into operation

16 * Depending on model and options

Fig. 52

uSlightly undo both screws and move the door with the

hinge to the left or right.

uFully tighten the screws (the middle screw is no longer

needed).

wThe door is now straight.

3.15 Connecting appliance

WARNING

Failure to connect properly

Fire hazard.

uDo not use an extension cable.

uDo not use distributor blocks.

NOTICE

Failure to connect properly

Damage to the electronics.

uDo not connect the appliance to a stand-alone inverter,

e.g. solar power systems and petrol generators.

Note

Only use the supplied mains cable.

Make sure the following prerequisites are met:

- The appliance is operated using alternating current only.

-The permitted voltage and frequency is printed on the

type plate. The type plate position can be seen in the

appliance overview chapter. (see 1.2 Overview of appli‐

ance and equipment)

-The socket is earthed according to the regulations and

fused.

- The fuse tripping current is between 10 A and 16 A.

- The socket is easily accessible.

uCheck the electrical connection.

uInsert the appliance plug into the back of the appliance.

Ensure that they latch into place.

uConnect the mains plug to the power supply.

wThe display switches to the standby symbol.

3.16 Switching on appliance (first use)

Make sure that the following requirements are fulfilled:

- Appliance is installed and connected.

-All adhesive strips, adhesive and protective films and

transport locks are removed from inside and outside the

appliance.

Fig. 53 Startup process

The standby symbol flashes until the startup process is

complete.

The standby symbol is shown in the display.

If the appliance has been supplied with factory settings,

the screen language and the date/time first need to be set

when using the appliance for the first time.

Fig. 54

uComplete steps (see Fig. 54) .

wLanguage is set.

Fig. 55

uComplete steps (see Fig. 55) .

wDate is set.

Fig. 56

uComplete steps (see Fig. 56) .

wTime is set.

Putting into operation

* Depending on model and options 17

Fig. 57 Status display

wThe appliance is ready for operation once the tempera‐

ture appears in the display.

4 Storage

4.1 Information regarding storage

Fig. 58 Fig. 59

When stocking observe the following:

qIf there are adjustable shelves Fig. 58 (1), position them

as required.

qObserve maximum load. (see 8.1 Technical specifications)

qDo not load appliance until storage temperature has been

reached (maintain cold chain).

qVentilation slots Fig. 59 (2) for recirculation fan in the

interior must be kept clear.

qItems for refrigeration must not come into contact with

the evaporator on the rear wall.

qKeep liquids in closed containers.

qLeave space when storing items for refrigeration to

ensure good air circulation.

qDo not stack refrigerated products above the indicated

height.

This is important for free air circulation and even temper‐

ature distribution in the interior.

5 Controls

5.1 Control and display elements

The display provides a quick overview of the current appli‐

ance status, the temperature setting, the status of func‐

tions and settings as well as alarm and error messages.

It is operated by swiping or pressing the colour touch

display directly.

Functions can be activated or deactivated and setting

values can be changed.

Fig. 60 Colour touch display

(1) Status display

5.1.1 Status display

Fig. 61 Status display

(1) Actual temperature (3) Defrosting status

(2) Alarm status (4) Door lock status

The status display is the home display.

It displays the temperature in the centre and three symbols

in the lower area. The status display may show a further

range of display symbols.

You navigate from the status display to the functions and

settings. (see 5.2 Navigation)

5.1.2 Display symbols

Display symbols provide information about the status of the

appliance.

Symbol Appliance status

Standby symbol

Appliance is switched off.

Standby symbol

(flashing)

Appliance is starting up.

Temperature (flashing)

Target temperature not

yet reached. Appliance

cooling to temperature

set.

Temperature display

Displays the current inte‐

rior temperature

Status display (with

white border)

Appliance is locked.

D in the display

Appliance is in Demo‐

Mode.

Maintenance display

(yellow)

The time interval set has

expired.

Full data memory

(yellow)

The data memory (999

hours) is full. From now,

the oldest data will be

overwritten.

Full alarm memory

(yellow)

The alarm memory is full.

Delete individual alarms

or entire memory.

Storage

18 * Depending on model and options

Symbol Appliance status

Manual door opening

(yellow)

The locked door was

opened manually.

Error symbol (red)

Appliance is in error

state.

Back arrow

Leads to higher-level

menu.

Background (blue)

Active setting or active

function

Bar (increasing)

Press for 3 seconds to

activate setting.

Bar (decreasing)

Press for 3 seconds to

deactivate setting.

Status display symbols

The additional symbols at the bottom edge of the status

display enable quick access to alarm information and

details of the appliance state.

Symbol Appliance status

Alarm symbol (grey)

Alarm archive is empty.

Pressing briefly opens the alarm archive.

Alarm symbol (white)

There are confirmed alarms in the alarm

archive.

Pressing briefly opens the alarm archive.

Alarm symbol (red)

There are still unconfirmed alarms in the

alarm archive.

Pressing briefly opens the alarm archive.

Alarm symbol (red, flashing)

There is an active alarm in the archive.

Pressing briefly opens the alarm archive.

Defrosting symbol (grey)

No active defrosting process.

Defrosting symbol (white, flashing)

Manual defrosting process active.

Pressing briefly opens the manual

defrosting. (see 5.3.23 Defrosting )

Defrosting symbol (white)

Automatic defrosting process active.

Function cannot be aborted.

Door lock symbol (white, closed)

The door lock is active.

Pressing briefly opens the code entry for

opening the door. (see 5.3.6 Door lock )

Symbol Appliance status

Door lock symbol (white, open)

The door lock is inactive.

Brief press opens the code entry for

locking the door. (see 5.3.6 Door lock )

Additional status display symbols

5.1.3 Acoustic signals

A signal sounds in the following cases:

-If a function or a value is confirmed.

-If a function or a value can either not be activated or not

deactivated.

-As soon as an error occurs.

-If there is an alarm message.

The alarms can be switched on and off in the customer

menu.

5.2 Navigation

Navigate in the menu to access the individual functions.

Operation using the touch display via swiping and tapping.

5.2.1 Navigation with the touch display

Navigation Description

Press briefly

Activates / deactivates function.

Confirms selection.

Opens submenu.

Press and hold (3 seconds)

Activates / deactivates function.

Confirms selection.

Resets appliance / values.

Switches appliance on / off.

Swipe right or left

Navigates within the menu.

Tap “Back” symbol briefly

Goes back one level.

Press and hold (3 seconds) “Back”

symbol

Goes back to status display.

5.2.2 Settings menu

You can access additional appliance functions via the

Settings menu.

Opening the Settings menu

uSwipe left or right until corresponding function is

displayed.

Fig. 62

Controls

* Depending on model and options 19

uCarry out steps according to the illustration.

-or-

uEnter access protection PIN code for the Settings menu.

(see 5.3.8 Settings menu access protection )

wThe Settings menu opens.

Settings menu access protection

(see 5.3.8 Settings menu access protection )

5.2.3 Customer menu

The Customer menu is protected by the code 151. You can

access additional appliance functions.

Opening the Customer menu

uOpen the Settings menu. (see 5.2 Navigation)

uSwipe left or right until corresponding function is

displayed.

Fig. 63

uCarry out steps according to the illustration.

wThe customer menu opens.

5.2.4 General rules

The following general rules apply in addition to the gestures

available:

-Once a value has been selected, the selection is

displayed for 2 seconds. The display then jumps back one

level.

-There is a return to the status display after 10 seconds

with no interaction

-If a selection is confirmed in a submenu, the display

switches back to the menu.

-Activated functions and selected values are highlighted

blue.

-Error/alarm/warning messages are highlighted red.

-Instructions/reminders are highlighted yellow.

-Long press to activate functions: increasing bar is

displayed on the screen.

-Long press to deactivate functions: decreasing bar is

displayed on the screen.

5.3 Functions

5.3.1 Overview of functions

Switch appliance on and off

Reset recording

Manually starts automatic defrosting

Settings

Access to this function can be blocked using

a PIN code. (see 5.3.8 Settings menu access

protection )

Info

Temperature setting

Temperature alarm

Door alarm

Light alarm*

Alarm simulation

Alarm relay

Alarm log

Sensor calibration

Maintenance interval reminder

Lighting

Language

Date/time

Temperature unit

Screen brightness

Data download

LAN *

Controls

20 * Depending on model and options

Page is loading ...

Liebherr HMFvh 4011 Perfection Operating instructions

Brand: Liebherr

Model: HMFvh 4011 Perfection

Category: Drink coolers

Type: Operating instructions

This manual is also suitable for

Download PDF

report

Liebherr HMFvh 4011 Perfection Operating instructions

This manual is also suitable for

Liebherr HMFvh 4011 Perfection Operating instructions

Related papers

Other documents